QUICKSILVER - Marine Parts & Accessories Mercury Marine MSDS 042-4897
(2 of 2 parts)
Product: Quicksilver Stabond Kit (UK148 Accelerator)
Product #: 92-818651, 92-818651 1, 92-818651 2, 92-818651 3, 92-818651A 1, 92-818651A 2,
92-818651A 3, 92-818651A 4
SECTION I - MANUFACTURER INFORMATION
Name: Mercury Marine Emergency: 800-424-9300 (ChemTrec)
Address: W6250 W. Pioneer Rd. Information: 920-929-5418
PO Box 1939 Date Prepared: 01-18-89
Fond du Lac WI 54936-1939 Revised: 12-01-03
SECTION II - HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
Hazardous Components* OSHA PEL ACGIH TLV V.P. % (Opt.)
< 1 x 10 77癋
.02ppm .005ppm 5
4,4-Diphenylmethane-diisocynante (101-68-8)**
Chlorobenzene (108-90-7)** 75ppm 75ppm 11.8 @ 77癋 5
Methyl Ethyl Ketone (78-93-3)** 200ppm 200ppm 70.0 @ 68癋 62
N-Propyl Acetate (109-60-4) 200ppm 200ppm 47.5 @ 68癋 10
* Specific Chemical Identity, Common Name (CAS)
** Indicates toxic chemical subject to reporting requirements under section 313 of Title III and 40CFR372.
SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS
Boiling Point: 175-270癋 Specific Gravity (H20=1): 0.9
Vapor Pressure (mmhg): See Section II Melting Point: N/D
Vapor Density (Air=1): > 1 Evaporation Rate: < 1
Solubility in Water: Nil (Butyl Acetate=1)
Appearance and Odor: Clear liquid; medium viscosity HMIS Rating: H-2 F-3 R-0 P-Section VIII
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
Flash Point (Method Used): 16癋 (TCC) NFPA Rating: N/D
Flammable Limits: LEL - 1.3 UEL - 11.4
Extinguishing Media: Foam, carbon dioxide, dry chemical, water fog
Special Fire Fighting Procedures: Self-contained breathing apparatus (SCBA) and full protective
clothing.
Unusual Fire and Explosion Hazards: Volatile solvent constituent can readily form explosive or
flammable mixtures in air. Vapors can flow along surfaces to distant ignition sources and flash back.
SECTION V - REACTIVITY DATA
Stability: Unstable ( ) Stable (X)
Conditions to Avoid: Keep away from all sources of ignition and heat.
Incompatibility (Materials to Avoid): Strong oxidizing agents
Hazardous Decomposition or Byproducts: Burning may produce nitrous oxide, phenols, carbon dioxide,
carbon monoxide, and hydrogen cyanide.
Hazardous Polymerization: May Occur ( ) Will Not Occur (X)
ADDITIONAL INFORMATION
Mercury Marine Emergency Information Number: 920-929-5000
Manufacturer, Stabond Corp., Emergency Number: 800-424-9300 (ChemTrec)
Mercury Marine MSDS 042-4897
SECTION VI - HEALTH HAZARD DATA
Route(s) of Entry: Inhalation (Y) Skin (Y) Eye (Y) Ingestion (Y)
Health Hazards (Acute and Chronic): Eye ?May cause irritation and tearing. Skin ?May cause
irritation, dermatitis, staining, and allergic sensitivity. Ingestion ?May cause irritation and corrosion on the
mouth and stomach tissue. Inhalation ?May cause irritation to upper respiratory tract and at higher
concentrations narcosis or central nervous system depression. May cause respiratory sensitivity with
asthma-like symptoms.
Carcinogenicity: NTP (N) IARC Monographs (N) OSHA Regulated (N)
Signs and Symptoms of Exposure: Inhalation - May cause headache, dizziness, and drowsiness. High
concentrations or prolonged exposure to lower concentrations may be irritating to mucous membranes and
may cause central nervous system depression. Eye ?Liquid or high vapor concentrations can be severely
irritating to the eyes. Skin ?Prolonged or repeated exposure may result in drying of the skin, which can
cause skin irritation and dermatitis. May cause temporary staining. Ingestion ?Moderate central nervous
system depression may be shown by giddiness, headache, dizziness, and nausea. If vomiting occurs, keep
head below hips to prevent aspiration of liquid into lungs. Aspiration pneumonitis may be evidenced by
coughing and cyanosis.
Medical Conditions Generally Aggravated by Exposure: Existing dermatitis, pre-existing eye and
respiratory disorders.
Emergency and First Aid Procedures: Inhalation - Remove to fresh air. Restore breathing, if required.
Get medical attention. Eye ?Immediately irrigate with flowing water for 15 minutes. Ingestion ?DO NOT
INDUCE VOMITING. If vomiting should occur spontaneously, keep victim's head below knees to prevent
aspiration into the lungs. Skin - Wash skin off with flowing water or shower. In all cases if irritation
persists, seek medical attention.
SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE
Steps to be Taken in Case Material is Released or Spilled: Handle as a flammable liquid. Remove all
ignition sources. Soak up wet material on a non-combustible absorbent and place in a closed metal
container.
Waste Disposal Method: Dispose in accordance with federal, state, and local regulations.
Precautions to be taken in Handling and Storing: Store in cool, well-ventilated areas away from any
ignition sources and strong oxidizing agents. Keep containers tightly closed when not in use. Do not
transfer to plastic containers. Ground and bond metal containers when dispersing. No smoking in areas of
use or storage. Use only non-sparking tools near wet adhesive or solvent vapors. Solvent vapor much
heavier than air and can collect in dangerous concentrations in floor drains or low areas.
Other Precautions: KEEP AWAY FROM CHILDREN!
SECTION VIII - CONTROL MEASURES
Respiratory Protection (Specify Type): Atmospheric levels should be maintained below the exposure
guideline. For exposure to higher or unknown levels, use an approved supplied air respirator or an approved
positive-pressure self-contained breathing apparatus if these levels are exceeded.
Ventilation - Local Exhaust & Mechanical: Sufficient in pattern and volume to meet TLV requirements
and prevent explosive concentrations of solvent vapors.
Protective Gloves: Use neoprene, vinyl, or natural rubber gloves
Eye Protection: Safety glasses or chemical goggles
Other Protective Clothing or Equipment: Solvent insoluble barrier hand cream. DO NOT WEAR
CONTACT LENSES WHEN USING THIS PRODUCT!
Work/Hygiene Practices: Always follow good housekeeping and personal hygiene practices.
N/D = NOT DETERMINED (NO DATA) N/E = NONE ESTABLISHED Y = YES
N/A = NOT APPLICABLE N/AV = NOT AVAILABLE N = NO
|