|-------------------------------------------------------|
| MATERIAL SAFETY DATA SHEET |
|-------------------------------------------------------|
|-------------------------------------------------------------------------|
| SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION |
|-------------------------------------------------------------------------|
THIS MATERIAL SAFETY DATA SHEET IS AVAILABLE IN SPANISH UPON REQUEST.
LOS DATOS DE SEGURIDAD DEL PRODUCTO PUEDEN OBTENERSE EN ESPANOL SI LO
REQUIERE.
PRODUCT NAME : KWIK FOAM
UPC NUMBER : 7079818230, 7079818232
PRODUCT USE/CLASS : Pressurized Insulating Foam
MANUFACTURER: 24 HOUR EMERGENCY:
DAP INC. TRANSPORTATION: 1-800-535-5053 (352-323-3500)
2400 BOSTON STREET MEDICAL : 1-800-327-3874 (513-558-5111)
BALTIMORE, MD 21224
PREPARE DATE : 08/22/1996 GENERAL INFORMATION:
REVISION NO. : 5 DAP INC. : 1-888-DAP-TIPS (1-888-327-8477)
REVISION DATE: 02/24/2000
|-------------------------------------------------------------------------|
| SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS |
|-------------------------------------------------------------------------|
WT/WT %
ITEM ------------ CHEMICAL NAME ------------- CAS NUMBER RANGE
---------------------------------------------------------------------------
01 Chlorodifluoromethane 75-45-6 10.0-30.0 %
02 4,4'-Diphenylmethane Diisocyanate(MDI) 101-68-8 5.0-20.0 %
03 Higher Oligomers of MDI 9016-87-9 5.0-20.0 %
---------------------- EXPOSURE LIMITS --------------------
ACGIH OSHA COMPANY
ITEM TLV-TWA TLV-STEL PEL-TWA PEL-CEILING TLV-TWA SKIN
---------------------------------------------------------------------------
01 1 ppm N.E. 1 ppm N.E. N.E. NO
02 0.005 ppm N.E. N.E. 0.02 ppm N.E. NO
03 N.E. N.E. N.E. N.E. N.E. NO
(See Section 16 for abbreviation legend)
Remaining ingredients are not considered hazardous per the OSHA Hazard
Communication Standard.
Listed Permissible Exposure Levels (PEL) are from the U.S. Dept. of Labor
OSHA Final Rule Limits (CFR 29 1910.1000); limits may vary between states.
(Continued on Page 2)
--------------------------------------------------------------------------
Product Name: KWIK FOAM
Revision Date: 02/24/2000 Page 2
|-------------------------------------------------------------------------|
| SECTION 3 - HAZARDS IDENTIFICATION |
|-------------------------------------------------------------------------|
EMERGENCY OVERVIEW: CAUTION! Contents under pressure. Harmful if inhaled.
Exposure to temperatures above 120 degrees F. may cause can to rupture.
POTENTIAL HEALTH EFFECTS:
EFFECTS OF OVEREXPOSURE - EYE CONTACT: May cause eye irritation.
EFFECTS OF OVEREXPOSURE - SKIN CONTACT: May irritate skin. Prolonged
or repeated contact may lead to sensitization and dermatitis(rash).
EFFECTS OF OVEREXPOSURE - INHALATION: Vapor harmful if inhaled. Vapor
may cause nose and throat irritation. Vapor inhalation may affect the
brain or nervous system causing dizziness, headache, nausea,
light-headedness or lethargy.
EFFECTS OF OVEREXPOSURE - INGESTION: This material may be harmful or
fatal if swallowed. If ingested, this product may cause vomiting,
diarrhea, and depressed respiration. May cause irritation of mucous
membranes in the mouth and digestive tract.
EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS: Reports have associated
permanent brain and nervous system damage with prolonged and repeated
occupational overexposure to solvents.
MEDICAL CONDITIONS WHICH MAY BE AGGRAVATED BY CONTACT: None known.
PRIMARY ROUTE(S) OF ENTRY: SKIN CONTACT INHALATION
|-------------------------------------------------------------------------|
| SECTION 4 - FIRST AID MEASURES |
|-------------------------------------------------------------------------|
EYE CONTACT: Flush with large quantities of water until irritation
subsides. Contact a physician.
SKIN CONTACT: Use a rag to remove excess foam from the skin and remove
contaminated clothing. Use of a mild solvent such as acetone or mineral
spirits may help in removing uncured foam. Cured may be physically
removed by persistent washing with soap and water. If irritation develops,
use a mild skin cream and contact a physician immediately.
INHALATION: Remove to fresh air. Provide oxygen or artificial
respiration by a trained personnel. Contact a physician immediately.
INGESTION: DO NOT INDUCE VOMITING. Drink 1-2 glasses of water or milk.
Do not give anything orally to an unconscious person. Contact a physician
or Regional Poison Control Center immediately.
COMMENTS: None.
(Continued on Page 3)
--------------------------------------------------------------------------
Product Name: KWIK FOAM
Revision Date: 02/24/2000 Page 3
|-------------------------------------------------------------------------|
| SECTION 5 - FIRE FIGHTING MEASURES |
|-------------------------------------------------------------------------|
FLASH POINT: 800 F. LOWER EXPLOSIVE LIMIT: N.E.
UPPER EXPLOSIVE LIMIT: N.E.
AUTOIGNITION TEMPERATURE: N.E.
EXTINGUISHING MEDIA: CO2 DRY CHEMICAL FOAM WATER FOG
UNUSUAL FIRE AND EXPLOSION HAZARDS: Containers may explode if exposed to
extreme heat. Eliminate sources of ignition: heat, electrical equipment,
sparks, and flames. Do not put in contact with oxidizing or caustic
materials.
SPECIAL FIREFIGHTING PROCEDURES: Full protective equipment, including
self-contained breathing apparatus, is recommended to protect from
combustion products. Cool exposed containers with water.
|-------------------------------------------------------------------------|
| SECTION 6 - ACCIDENTAL RELEASE MEASURES |
|-------------------------------------------------------------------------|
SPILL OR LEAK PROCEDURES: Use absorbent material or scrape up dried
material and place into containers.
|-------------------------------------------------------------------------|
| SECTION 7 - HANDLING AND STORAGE |
|-------------------------------------------------------------------------|
HANDLING INFORMATION: KEEP OUT OF REACH OF CHILDREN. Avoid skin and eye
contact. Avoid breathing vapors. Use only in a well ventilated area. Make
sure nozzle arrow is directed away from yourself prior to discharge.
STORAGE INFORMATION: Store away from caustics and oxidizers. Keep away
from heat, spark, and flame. Keep containers tightly closed when not in
use. Keep containers from excessive heat and freezing. Do not store at
temperatures above 120 degrees F.
OTHER PRECAUTIONS: Intentional misuse by deliberately concentrating
inhaling vapors may be harmful or fatal. Do not take internally.
|-------------------------------------------------------------------------|
| SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION |
|-------------------------------------------------------------------------|
ENGINEERING CONTROLS: Provide sufficient mechanical ventilation (local or
general exhaust) to maintain exposure below PEL and TLV. Vapors are
heavier than air and will collect in low areas. Check all low areas
(basements, sumps, etc.) for vapors before entering.
(Continued on Page 4)
--------------------------------------------------------------------------
Product Name: KWIK FOAM
Revision Date: 02/24/2000 Page 4
|-------------------------------------------------------------------------|
| SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION |
|-------------------------------------------------------------------------|
RESPIRATORY PROTECTION: If 8 hour exposure limit or value is exceeded for
any component, use an approved NIOSH/OSHA respirator. Consult your safety
equipment supplier and the OSHA regulation, 29 CFR 1910.134 for respirator
requirements. A respiratory protection program that meets OSHA 1910.134 and
ANSI Z88.2 requirements must be followed whenever workplace conditions
warrant a respirator's use.
EYE PROTECTION: Goggles or safety glasses with side shields.
SKIN PROTECTION: Gloves recommended for repeated or prolonged contact
with skin.
OTHER PROTECTIVE EQUIPMENT: None.
HYGIENIC PRACTICES: Remove contaminated clothing and wash before reuse.
|-------------------------------------------------------------------------|
| SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES |
|-------------------------------------------------------------------------|
BOILING RANGE : 0 F.(Fluorocarbon)VAPOR DENSITY : Is heavier than
air
ODOR : Mild fluorocarbon odor
APPEARANCE : Off-white to yellowish color liquid
SOLUBILITY IN H2O : Insoluble
SPECIFIC GRAVITY : 1.20
VAPOR PRESSURE : > 50 psi in container
PHYSICAL STATE : Liquid
(See Section 16 for abbreviation legend)
|-------------------------------------------------------------------------|
| SECTION 10 - STABILITY AND REACTIVITY |
|-------------------------------------------------------------------------|
CONDITIONS TO AVOID: Excessive heat and freezing.
INCOMPATIBILITY: Strong oxidizers and caustics.
HAZARDOUS DECOMPOSITION PRODUCTS: Normal decomposition products, i.e. COx,
NOx
HAZARDOUS POLYMERIZATION: Will not occur under normal conditions.
STABILITY: This product is stable under normal storage conditions.
|-------------------------------------------------------------------------|
| SECTION 11 - TOXICOLOGICAL PROPERTIES |
|-------------------------------------------------------------------------|
No product or component toxicological information is available.
(Continued on Page 5)
--------------------------------------------------------------------------
Product Name: KWIK FOAM
Revision Date: 02/24/2000 Page 5
|-------------------------------------------------------------------------|
| SECTION 12 - ECOLOGICAL INFORMATION |
|-------------------------------------------------------------------------|
No Information.
|-------------------------------------------------------------------------|
| SECTION 13 - DISPOSAL CONSIDERATIONS |
|-------------------------------------------------------------------------|
WASTE MANAGEMENT/DISPOSAL: Dispose of according to Federal, State, and
Local Standards. Use all material before disposal. If unable to use
entire contents of can, relieve pressure in container until it equals
external pressure. Incineration of this can without first relieving all
pressure may result in an explosion and personal injury. Responsibility for
proper waste disposal is with the owner of the waste.
EPA WASTE CODE - If discarded (40 CFR 261): None.
|-------------------------------------------------------------------------|
| SECTION 14 - TRANSPORTATION INFORMATION |
|-------------------------------------------------------------------------|
DOT PROPER SHIPPING NAME: Consumer Commodity
DOT HAZARD CLASS: ORM-D
DOT UN/NA NUMBER: NONE PACKING GROUP: NONE RESP. GUIDE PAGE: 171
|-------------------------------------------------------------------------|
| SECTION 15 - REGULATORY INFORMATION |
|-------------------------------------------------------------------------|
U.S. FEDERAL REGULATIONS: AS FOLLOWS -
OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR
1910.1200)
SARA SECTION 313:
This product contains the following substances subject to the reporting
requirements of Section 313 of Title III of the Superfund Amendments and
Reauthorization Act of 1986 and 40 CFR Part 372:
----------- CHEMICAL NAME ----------- CAS NUMBER WT/WT % RANGE
4,4'-Diphenylmethane Diisocyanate(MDI) 101-68-8 5.0-20.0 %
Chlorodifluoromethane 75-45-6 10.0-30.0 %
TOXIC SUBSTANCES CONTROL ACT:
This product contains the following chemical substances subject to the
reporting requirements of TSCA 12(B) if exported from the United States:
----------- CHEMICAL NAME ----------- CAS NUMBER
No information is available.
(Continued on Page 6)
--------------------------------------------------------------------------
Product Name: KWIK FOAM
Revision Date: 02/24/2000 Page 6
|-------------------------------------------------------------------------|
| SECTION 15 - REGULATORY INFORMATION |
|-------------------------------------------------------------------------|
NEW JERSEY RIGHT-TO-KNOW:
The following materials are non-hazardous, but are among the top five
components in this product:
----------- CHEMICAL NAME ----------- CAS NUMBER
Polyol Resin Proprietary
Flame Retardant Proprietary
PENNSYLVANIA RIGHT-TO-KNOW:
The following non-hazardous ingredients are present in the product at
greater than 3%:
----------- CHEMICAL NAME ----------- CAS NUMBER
Polyol Resin Proprietary
Flame Retardant Proprietary
CALIFORNIA PROPOSITION 65:
WARNING: The chemical(s) noted below and contained in this product, are
known to the state of California to cause birth defects or other
reproductive harm:
----------- CHEMICAL NAME ----------- CAS NUMBER
No Proposition 65 chemicals are known to exist in this product.
INTERNATIONAL REGULATIONS: AS FOLLOWS -
CANADIAN WHMIS: This MSDS has been prepared in compliance with Controlled
Product Regulations except for use of the 16 headings.
CANADIAN WHMIS CLASS: No information available.
(Continued on Page 7)
--------------------------------------------------------------------------
Product Name: KWIK FOAM
Revision Date: 02/24/2000 Page 7
|-------------------------------------------------------------------------|
| SECTION 16 - OTHER INFORMATION |
|-------------------------------------------------------------------------|
HMIS RATINGS - HEALTH: 1 FLAMMABILITY: 1 REACTIVITY: 1
PREVIOUS MSDS REVISION DATE: 01/04/2000
REASON FOR REVISION:
SECTION 1: Address change and new emergency contact phone numbers.
VOC less water, less exempt solvent: 0 g/L (calculated)
VOC material : 0 g/L (calculated)
LEGEND: ACGIH - AMERICAN CONFERENCE OF GOVERNMENTAL INDUSTRIAL HYGIENISTS
N.A. - NOT APPLICABLE
N.E. - NOT ESTABLISHED
PEL - PERMISSIBLE EXPOSURE LIMIT
NTP - NATIONAL TOXICOLOGY PROGRAM
SARA - SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT OF 1986
STEL - SHORT TERM EXPOSURE LIMIT
TLV - THRESHOLD LIMIT VALUE(8 HR. TIME WEIGHTED AVERAGE OR TWA)
VOC - VOLATILE ORGANIC COMPOUND
NJRTK - NEW JERSEY RIGHT TO KNOW LAW
N.D. - NOT DETERMINED
MSDS# 77005
---------------------------------------------------------------------------
This data is offered in good faith as typical values and not as a product
specification. No warranty either expressed or implied, is hereby made.
The recommended industrial hygiene and safe handling procedures are
believed to be generally applicable. However, each user should review the
recommendations in specific context of the intended use and determine if
they are appropriate.
---------------------------------------------------------------------------
< End OF MSDS >
|