4/2/2002
Vettec Material Safety Data Sheet
Emergency 805/488-1122
600 E. Hueneme Road, Oxnard, CA 93033-8600 USA
Information 805/488-1122
Product Name Bovi-Bond
Other Name Block Adhesive Material
Applicable REF 46130
MSDS Number MS405
Hazardous Ingredients
PEL / TLV
Principal Hazardous Components CAS Number Percentage
.02ppm/.005ppm
Diphenylmethanediisocyanate prepolymer 67837-35-8 <55
.01ppm/.005ppm 101-68-8
4,4'-MDI <27
102-60-3
NA
Tetrakis (2-hydroxypropyl) ethylenediamine <20
NA 1477-55-0
Meta-xylylenediamine <3
Physical and Chemical Characteristics
Appearance Off-White to Light Yellow (after polymerization).
Boiling Point NA Odor Typical
Melting Point NA Vapor Density NA
Vapor Pressure <1 mm of Hg @ 68癋 (20癈) Specific Gravity NA
Evaporation Rate NA Water Solubility No
Fire and Explosion Data
Flammable Limits Not considered to be a fire hazard.
Explosive Limits Not considered to be an explosion hazard.
Extinguisher Media C02, Dry Chemical, H20 Special Fire Fighting Procedures Water produces C02
Flashpoint >275癋 (135癈) Unusual Hazards Not Known
Reactivity Data
Stability Stable Hazardous Decornp Products CO, NOx, and trace HCN
Incompatibilities Strong Acids/Bases, Oxidizers, or H20 Hazardous Polymerization IViay occur
4/2/2002
Vettec Material Safety Data Sheet
Emergency 805/488-1122
600 E. Hueneme Road, Oxnard, CA 93033-8600 USA
Information 805/488-1122
Product Name Bovi-Bond
Other Name Block Adhesive Material
Applicable REF 46130
MSDS Number IV1S405
Health Hazard Information
Aviod breathing dust created from grinding or sanding of polymerized material.
Inhalation
NA
Ingestion
Unreacted material can cause irritation.
Skin/Eye Contact
No harm via exposures of normal use; harmful only due to overwhelming dose or unusual
Toxicity Data
conditions.
Acute Hazards Prolong or repeated exposure may cause skin irritation.
Chronic Hazards Exposure above TLV can cause irritation.
Carcinogenicity NA, no product ingredient listed by NTP, IARC, OSHA.
Precautions for Safe Handling and Use
Cleanup Allow polymerization to proceed and remove from surface.
Disposal Dispose of in accordance with local, state, and federal regulations.
Precautions As part of good industrial, personal hygiene, and safety pratice avoid all unnecessary exposure
to unmixed components and ensure prompt removal from skin, eyes, and clothing.
Occupational Control Measures
Eye Protection Goggles or eye shield. Dust/Particulate Mask If sanding or grinding.
Gloves Neoprene or nitrile gloves. Other NA
30T Hazard Status
Hazard Class Not regulated
'Small Quantity Exception NA
Other Exception NA
Specific Exception NA