MATERIAL SAFETY DATA SHEET Page: 1
SYNPHENOL-3
Flammability Instability
2 Printed: 09/07/2006
Revision: 09/07/2006
1 0 Supercedes Revision: 02/23/2006
Health
Date Created: 12/12/1991
Special
1. Product and Company Identification
3862-177-43591
Product Code:
SYNPHENOL-3
Product Name:
3000655
Reference #:
Manufacturer Information
Distributed by:
Company Name:
Veterinary Products Laboratories
P.O. Box 34820
Phoenix, AZ 85067-4820
(602)285-1660
Emergency Contact:
(602)285-1660
Information:
Sherry Faith
Preparer Name:
COMPOUND
Chemical Family:
Additional Identity Information
Former EPA Reg. No. 11725-7-43591
2. Composition/Information on Ingredients
Hazardous Components (Chemical Name) CAS # Percentage OSHA PEL ACGIH TLV Other Limits
1. 2-Phenylphenol 90-43-7 12.0 % No data. No data. No data.
2. ORTHO BENZYL PARA CHLOROPHENE 120-32-1 10.0 % No data. No data. No data.
3. Phenol, 4-(1,1-dimethylpropyl)- 80-46-6 4.0 % No data. No data. No data.
4. Isopropyl alcohol 67-63-0 0.1 -6.0 % No data. No data. No data.
3. Hazards Identification
Emergency Overview
EYES: Exposure to product in concentrate may cause severe irritation.
SKIN CONTACT: Exposure to product may cause severe irritation. Acute Dermal LD50 is greater than 2g/kg
body weight.
INGESTION: Material can be harmful if ingested in quantity. Acute Oral LD50 in rats = 3,526 mg/kg of body
weight.
INHALATION: Prolonged exposure to concentrate may cause minor respiratory discomfort. LC50 in rats is
greater than gravimetric concentration of 5.6 mg/l.
Inhalation? Yes Skin? Yes Eyes? Yes Ingestion? Yes
Route(s) of Entry:
Potential Health Effects (Acute and Chronic)
Causes irreversible eye damage and skin burns. Harmful if swallowed or absorbed through the skin, or on
clothing.
NA
Recommended Exposure Limits:
Acute Oral LD50 in rats = 3,526 mg/kg
LD 50/LC 50:
Signs and Symptoms Of Exposure
No data available.
Medical Conditions Generally Aggravated By Exposure
Unknown
Licensed to Farnam Companies: MIRS MSDS, (c) A V Systems, Inc. ANSI Z400.1 Format
MATERIAL SAFETY DATA SHEET Page: 2
Printed: 09/07/2006
SYNPHENOL-3 Revision: 09/07/2006
Supercedes Revision: 02/23/2006
4. First Aid Measures
Emergency and First Aid Procedures
IF IN EYES: Hold eyelids open and rinse slowly and gently with water for 15-20 minutes. Remove contact
lenses, if present, after the first 5 minutes, then continue rinsing eye. Call poison control center or doctor for
treatment.
IF SWALLOWED: Call poison control center or doctor immediately for treatment advice. Have the person sip a
glass of water if able to swallow. Do not induce vomiting until told to do so by the poison control center or
doctor. Do not give anything by mouth to an unconscious person.
IF ON SKIN OR CLOTHING: Take off contaminated clothing. Rinse skin immediately with plenty of water for
15-20 minutes. Call a poison control center or doctor for treatment advice.
IF INHALED: Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give artificial
respiration, preferably mouth-to-mouth if possible. Have the product label with you when calling a poison
control center or doctor or going for treatment.
Note to Physician
Probable mucosal damage may contraindicate the use of gastric lavage. Measures against circulatory shock,
respiratory depression and convulsion may be needed.
5. Fire Fighting Measures
> 96.00 F Method Used: TCC
Flash Pt:
LEL: NT UEL: NT
Explosive Limits:
Fire Fighting Instructions
None
Flammable Properties and Hazards
None
Extinguishing Media
Water
Unsuitable Extinguishing Media
No data available.
6. Accidental Release Measures
Steps To Be Taken In Case Material Is Released Or Spilled
Contain spilled liquid with sand or earth. DO NOT use combustible materials such as sawdust. Collect and
contain for disposal in accordance with all state and federal regulations.
7. Handling and Storage
Precautions To Be Taken in Handling
Do not apply this product in or on electrical equipment due to the possibility of shock hazard.
Precautions To Be Taken in Storing
Store only in original container away from heat or open flame. Keep container closed when not in use. Storage
must be secured sufficiently to make product inaccessible to children or persons unfamiliar with its proper use. Do
not contaminate water, food, or feed by storage or disposal.
Other Precautions
KEEP OUT OF REACH OF CHILDREN.
8. Exposure Controls/Personal Protection
Respiratory Equipment (Specify Type)
Applicators and other handlers exposed to fog during fogging applications, and until fog has dissipated and the
enclosed area has been thoroughly ventilated, must wear a full-face dust/mist filtering respirator with an organic
vapor removing cartridge with a prefilter approved for pesticides (MSHA/NIOSH approval number prefix
TC-23C) or a canister approved for pesticides (MSHA/NIOSH approval number prefix TC-14G), or a NIOSH
approved respirator with an organic vapor (OV) cartridge with any R, P or HE prefilter. Follow manufacturers'
Licensed to Farnam Companies: MIRS MSDS, (c) A V Systems, Inc. ANSI Z400.1 Format
MATERIAL SAFETY DATA SHEET Page: 3
Printed: 09/07/2006
SYNPHENOL-3 Revision: 09/07/2006
Supercedes Revision: 02/23/2006
instructions for cleaning/maintaining PPE. If no such indtructions exist for washables, use detergent and hot
water. Discard clothing or toher absorbent materials that have been drenched or heavily contaminated with this
product's concentrate. Do not reuse them. Keep and wash PPE separately from other laundry.
Eye Protection
Goggles
Protective Gloves
Chemical-resistant gloves such as barrier laminate, butyl rubber, neoprene rubber and viton.
Other Protective Clothing
Handlers must wear coveralls over long-sleeved shirt and long pants; socks and chemical resistant shoes; goggles
or face shield; chemical resistant gloves.
Engineering Controls (Ventilation etc.)
Maintain adequate ventilation
Work/Hygienic/Maintenance Practices
Wash hands after use and before eating, drinking, chewing gum, using tobacco, or using restroom. Users should
remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. Remove
personal protective equipment immediately after handling this product. Wash outside of gloves before removing.
As soon as possible, wash thoroughly.
9. Physical and Chemical Properties
[ ] Gas [ X ] Liquid [ ] Solid
Physical States:
N.A.
Melting Point:
211.00 F
Boiling Point:
No data.
Autoignition Pt:
> 96.00 F Method: TCC
Flash Pt:
LEL: NT UEL: NT
Explosive Limits:
1.09 at 25.0 C
Specific Gravity (Water = 1):
No data.
Vapor Pressure (vs. Air or mm Hg):
No data.
Vapor Density (vs. Air = 1):
.9 at 25.0 C
Evaporation Rate (vs Butyl
Acetate=1):
100%
Solubility in Water:
Soluble
Other Solubility Notes:
N.A.
Percent Volatile:
No data.
Corrosion Rate:
BIO-TEK INDUSTRIES, INC.
Formula:
NA
pH:
Appearance and Odor
Color varies between amber and purple upon aging (color variance has no relationship to efficacy and cleaning
ability; pleasant lemon odor.
10. Stability and Reactivity
Unstable [ ] Stable [ X ]
Stability:
Conditions To Avoid - Instability
Unknown
Incompatibility - Materials To Avoid
Acids, other detergents, chlorine.
Hazardous Decomposition Or Byproducts
Unknown
Licensed to Farnam Companies: MIRS MSDS, (c) A V Systems, Inc. ANSI Z400.1 Format
MATERIAL SAFETY DATA SHEET Page: 4
Printed: 09/07/2006
SYNPHENOL-3 Revision: 09/07/2006
Supercedes Revision: 02/23/2006
Will occur [ ] Will not occur [ X ]
Hazardous Polymerization:
Conditions To Avoid - Hazardous Polymerization
Will not occur.
11. Toxicological Information
Toxicological Information
No data available.
Carcinogenicity/Other Information
No data available.
NTP? No IARC Monographs? No OSHA Regulated? No
Carcinogenicity:
12. Ecological Information
Ecological Information
This product is toxic to fish. Do not discharge effluent containing this product into lakes ponds, streams, estuaries,
oceans, or other waters unless in accordance with the requirements of a National Pollutant Discharge Elimination
System (NPDES) permit and the permitting authority has been notified in writing prior to discharge. Do not
discharge effluent containing this product to sewer systems without previously notifying the local sewage
treatment plant authority. For guidance, contact your State Water Board or Regional Office of the EPA.
13. Disposal Considerations
Waste Disposal Method
Dispose of in accordance with Local, State and Federal regulations.
Plastic container disposal: Triple rinse (or equivalent) then offer for recycling or reconditioning, or puncture and
dispose of .
14. Transport Information
LAND TRANSPORT (US DOT)
DOT Proper Shipping Name
No data available.
ORM-D
DOT Hazard Class:
None
DOT Hazard Label:
Additional Transport Information
Containers greater than 1.3 gallons: Flammable Liquid, Corrosive, N.O.S. (Marine Pollutant, Contains Isopropyl
Alcohol, Caustic Soda, and OBCP), 3, UN2924, PG III, Synphenol-3
15. Regulatory Information
No data available.
16. Other Information
Additional Information About This Product
Container disposal: Plastic: triple rinse, then offer for recycling or reconditioning.
Company Policy or Disclaimer
The information and data herein are believed to be accurate and have been compiled from sources believed to be
reliable. It is offered for your consideration, investigation and verification.
Licensed to Farnam Companies: MIRS MSDS, (c) A V Systems, Inc. ANSI Z400.1 Format
|