1. Chemical Product & Company Data
Product Name: Microban Disinfectant Spray Plus & Fragrance Free Version
Manufacturer: Supplier:
ProRestore Products
4660 Elizabeth Street
Coraopolis, PA 15108
Telephone: 1-412-264-8340
2. Ingredients
Name CAS # UN # % by volume
2-propanol 67-63-0 5-10
O-Phenylphenol 90-43-7 2200 ppm
Diisibutylphenoxyethoxy ethyl dimethyl benzyl ammonium chloride monohydrate 121-54-0 7000 ppm
3. Hazards Identifcation
Emergency Overview
Skin and eye irritant.
NOTE: Hazard information is based on the characteristics of the components of this mixture.
Ingestion - May cause abdominal discomfort, nausea, vomiting and diarrhea.
Inhalation - May cause irritation of the respiratory tract.
Eye Contact - May cause eye irritation.
Skin Contact - Prolonged contact may cause discomfort and irritation of the skin.
4. First Aid
Inhalation - Remove patient to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get immediate medical attention.
Eye Contact - Immediately flush with plenty of water. Get medical attention if irritation persists.
Skin Contact - Remove contaminated clothing. Wash skin with soap and water. Obtain medical attention if irritation persists.
Ingestion - Drink promptly a large quantity of water. Do not induce vomiting. Avoid alcohol. Get medical attention.
Microban Disinfectant Spray Plus
5. Fire Fighting Measures
Flammability If yes, under which condi- Combustible liquid. Potential fire hazard when exposed to excessive
tions? heat, flame or other souces of ignition.
X
Yes No
Flashpoint: Upper flammable limit Lower flammable limit
102 癋 (38.9 癈) % by volume % by volume
Autoignition temperature Hazardous combustion products Explosion data
Means of extinction:
6. Accidental Release Measures
Wear personal protective equipment.
Do not allow spill to reach watercourse or sewers.
Contain spill with absorbent mats or booms or inert materials such as sand. Material should be readily available in the
workplace.
Collect and store waste materials in suitable containers for disposal ie. metal drums.
7. Handling & Storage
To prevent vapor escaping to the atmosphere keep all containers closed or covered.
Eyewash stations are recommended in the workplace.
If eye irritation is encountered the use of a full facepiece respirator is recommended.
Mechanical ventilation is recommended in enclosed workspaces.
Area should be evacuated of all non essential personnel prior to application of product.
8. Exposure Controls & Personal Protection
Personal Protective Equipment
Gloves Respirator Eye
Natural Rubber Respiratory protection is only required when Goggles
fogging or atomizing in the breathing zone, or
when being used in a poorly ventilated area.
Footwear Clothing Other
n. ap. Coveralls or equivalent n. ap.
Exposure Guidelines
*none established for product*
OSHA ACGIH
TWA STEL TWA STEL
2-propanol 400 ppm 500 ppm 400 ppm 500 ppm
Microban Disinfectant Spray Plus
9. Physical and Chemical Properties
Physical state Odor and appearance
Liquid Milky white liquid, mint odor when fragrance is added
Odor threshold (ppm) Vapor pressure (mm Hg) Vapor density (Air=1)
n. av. n. av. n. av.
Evaporation Boiling point Freezing point
(butyl acetate = 1) n. av. 212 癋 (100 癈) n. av.
pH Specific gravity Coefficient water/oil distribution
6.5 - 7.5 0.97 n. av.
Solubility in water Viscosity % Volatiles (by weight)
100% n. av. n. av.
10. Stability and Reactivity
Chemical Stability If no, under
X which conditions?
Yes No
Incompatibility with other substances If yes, under
X which conditions?
Yes No
Reactivity, and under n. ap.
what conditions?
Hazardous decomposition n. ap.
products?
11. Toxicological Information
Route of Entry
X X X X
Skin Contact Skin Absorption Eye Contact Inhalation Ingestion
No toxicity studies have been conducted for the product.
Carcinogenicity Mutagenicity Teratogenicity Reproductive toxicity
No No No No
Synergistic products Sensitization Neurotoxicity Target organs
No No No Eyes and Skin
12. Ecological Information
n. av.
Microban Disinfectant Spray Plus
13. Disposal Considerations
Dispose of in compliance with all Federal, state and local laws and regulations.
14. Transport Information
Shipping Name: NOT REGULATED
Hazard Class:
UN Identification #:
US domestic shipments are not DOT regulated for truck or rail shipments up to 119 gallons or less.
Consumer Commodity - ORM-D Air for air shipments in the US.
15. Regulatory Information
This material safety data sheet has been prepared in accordance with the requirements of the OSHA Hazard Communication Standard (29 CFR
1910.1200) and the Hazardous Products Act (Can.) and the Controlled Products Regulations (Can.) This product has been classified in accordance
with the hazard criteria of the CPR (Can.) and the MSDS contains all the information required by the CPR (Can.).
Federal Level Regulations: This is an EPA FIFRA registered pesticide (EPA Registration No. 70385-5). This material can only be used commercially in
the EPA registered application(s) noted on the product label.
This product is classed as a skin and eye irritant - 29 CFR 1910.1200 and Controlled Products Regulations (Can.)
WHMIS classification D2B
This product is not subject to the reporting requirement of Section 313 of Title III of Superfund Amendments and Reauthorization Act (SARA) 1986 and
40 CFR part 372.
16. Other Information
National Fire Protection
HMIS (U.S.A.)
Association (U.S.A.) Fire Hazard
Health Hazard 1
2
Fire Hazard 2 Health Reactivity
0
1
Reactivity 0
Personal Protection c
Specific Hazard
This product is a disinfectant and deodorant.
For chemical emergency during transportation call INFOTRAC (US) 1-800-535-5053 (INT'L) 1-352-323-3500
Prepared by: ProRestore Products, Coraopolis, PA / Cliff Zlotnik Phone No: 1-412-264-8340 Date: March 13, 2009
Abbreviations:
n. av. = not available n. ap. = not applicable ppm = parts per million
mm Hg = millimeters of Mercury PMCC = Pensky Martens Closed Cup TCC = Tagliabue Closed Cup
COC = Cleveland Open Cup TWA = Time Weighted Average STEL = Short Term Exposure Limit
LD = Lethal Dose LC = Lethal Concentration CS = centistokes
This information is furnished without warranty, expressed or implied except that it is accurate to the best knowledge of ProRestore Products. The data and information on this sheet relates only to the specific material designated herein. ProRestore Products
assumes no legal responsibility for use or reliance upon this data.