OSHA-Required Health And Safety Information!
This Material Safety Data Sheet (MSDS) was requested moments ago
from Hercules Automated Fax Information System. Please forward it
immediately to the person in charge of MSDS's, or retain it at the
machine until claimed.
Section 1
MATERIAL SAFETY DATA SHEET # 24
Pro Poxy 20
Hercules Chemical Company Inc.
Date Prepared: 1/28/1987 Last Reviewed: 8/18/2009
111 South Street
Passaic NJ 07055
Meets OSHA 29 CFR 1910.1200
Phone (800) 221-9330
Fax (800) 333-3456
Section 2 - Hazardous Ingredients/Identity Information
Hazardous Components (Specific Chemical Identity;
Upper Bound
Common Name(s), CAS Numbers) Other Limits
OSHA PEL ACGIH TLV
Limit if SARA
Reportable
Diglycidyl ethers of bisphenol A CAS # 25036-25-3 N/A N/A --
N/A 5PPM N/A
2,4,6, Tri (Dimethylaminomethyl) Phenol (90-72-2) --
N/A N/A N/A
Epoxy Resin (Diglycidyl Ether of Bisphenol A) (25068-38-6)
5mg/m3
5mg/m3
Zinc Sulfide CAS 1314-98-3
HMIS Hazard Rating: Health: 1 Flammability: 0 Reactivity: 0 Personal Protection: B
Section 3 - Physical/Chemical Characteristics
Boiling Point (癋): Specific Gravity Vapor Density Vapor Pressure
(H2O = 1): (Air = 1): (mm Hg):
N/A 1.97 N/A N/A
Solubility in Water:
Evaporation Rate:
Melting Point (?F):
(Butyl Acetate = 1)
<0.1%
VOC Level:
N/A Not soluble
2 components in mastic form: Off-white Mercaptan odor
Appearance And Color: Odor:
gray/black
Section 4 - Fire And Explosion Hazard Data
Flash Point: Flammable Limits: LEL: UEL:
>140癋 Method: N/A N/A
N/A
Extinguishing Media: Water fog, foam, CO2, and dry chemical.
Special Firefighting Procedures:
Fire fighters and others who may be exposed to the products of combustion should be equipped with NIOSH
approved, positive pressure self contained breathing apparatus (SCBA) and full protective clothing.
Unusual Fire And Explosion Hazards:
None
Continued on Next Page
Hercules Chemical Material Safety Data Sheet # 24 Page 2
Pro Poxy 20
Section 5 - Reactivity Data
Stability: Conditions To Avoid:
Stable None
Incompatability None
(Materials To Avoid):
Hazardous Decomposition: Carbon monoxide, aldehydes, acids, oxides of sulfur and nitrogen may be formed.
Hazardous Polymerization: Will Not Occur
Section 6 - Health Hazard Data
Routes of Entry: Inhalation Skin Ingestion
N/A YES/Secondary YES/Secondary
Health Hazards:
None known
Carcinogenicity: NTP IARC OSHA Regulated
NO NO NO
Signs And Symptoms of Exposure:
EYE: May cause moderate eye irritation.
SKIN: Prolonged and repeated contact may cause skin irritation with local redness.
INGESTION: Very low toxicity if swallowed.
INHALATION: N/A
Medical Conditions Generally Aggravated By Exposure:
None
Emergency And First Aid Procedures:
SKIN CONTACT: After using, wash hands with soap and water. EYE CONTACT: Flush with water for 15 minutes.
Get medical attention. INGESTION: No emergency medical treatment necessary.
Continued on Next Page
Hercules Chemical Material Safety Data Sheet # 24 Page 3
Pro Poxy 20
Section 7 - Precautions For Safe Handling And Use:
Steps To Be Taken In Case Material Is Released Or Spilled:
Sweep up in normal manner
Waste Disposal Method:
Non-hazardous landfill
Precautions To Be Taken In Handling And Storing:
None
Other Precautions:
Store in cool, dry, well-ventilated area.
Section 8 - Control Measures:
Respiratory Protection:
N/A
Ventilation: Local Exhaust Adequate N/A
Special
Mechanical Other
N/A N/A
Polyethylene gloves for prolonged use.
Gloves:
Eye Protection: Safety glasses or goggles
Other Protective
None required
Clothing:
Work/Hygienic Practices Wash thoroughly with warm water and soap after handling.
Additional Information:
For Hercules Material Safety Data Sheets by
fax anytime, day or night, just call
1-800-942-INFO (1-800-942-4636) from any
Touch-Tone phone. Have your fax number
ready. Checking the product label for the
correct MSDS # will save time.