THERMO-LAG
2000-P
PHYSICAL DATA
This product was formerly known as:
98% +/- 2%
Volume Solids
Thermo-Lag 2000 (100% solids) Petro
Net weight per gallon (lbs)
(Also supplied in a fast cure version.) Part A 10.5 卤 5%
Part B 11.4 卤 5%
PRODUCT DESCRIPTION 1:1
Mixing Ratio (by volume)
THERMO-LAG 2000-P is a two component, epoxy
based, thermally activated, subliming coating, which is Cure Time @ 77掳F (25掳C) and 50% R.H.
spray applied directly to primed steel surfaces. It Recoat 1 - 4 hours
provides a hard, durable aesthetically pleasing finish Touch 1 - 4 hours
that allows the shape of the steel to be maintained Handle 24 hours
while providing the specified level of fire resistance.
Topcoat 24 hours
___________________________________________
Color
BASIC USE Part A Light Gray
THERMO-LAG 2000-P is applied to structural columns,
Part B Black
beams, vessel skirts, bulkheads, underdecks and
Mixed Gray
electrical raceways to provide hydrocarbon and
cellulosic fire ratings for 1 through 4 hours protection.
Heavy Mastic
Consistency
THERMO-LAG 2000-P can be utilized for interior and
exterior environments. Textured
Finish
___________________________________________
Pot Life: Use only plural component spray
TESTING / CERTIFICATION / RECOGNITION
equipment.
Underwriters Laboratories, Inc. (UL)
Intertek Laboratories, Inc. V.O.C. (EPA Method 24)
Lloyd鈥檚 Register of Shipping (LRS) As supplied .11 lb/gal (13 g/l)
Det Norske Veritas (DNV)
American Bureau of Shipping (ABS)
Flash Point
Southwest Research Institute (SwRI)
Part A 185掳F (85掳C)
Many Leading Oil and Petrochemical Companies
Part B >200掳F (>93掳C)
___________________________________________
APPLICATION CONDITIONS 9 Months
Shelf Life
Air and substrate temperature:
above 41掳F (5掳C) and rising
APPLICATION SUMMARY
5掳F (3掳C) above dew point
1. Grit blast to:
Humidity: not greater than 85%
SSPC-SP6 (Sa2) Onshore
(Provide heat and/or dehumidification if needed.)
SSPC-SP10 (Sa2-1/2) Offshore
___________________________________________
2. Apply approved primer
3. First coat - THERMO-LAG 2000-P
PACKAGING /SHIPPING
4. Apply Fiberglass Mesh or High Temp Mesh
9.0 Gallon (US) Kits (full pails)
___________________________________________ 鈥? depending on design
5. Final coat - THERMO-LAG 2000-P to specified thickness
STORAGE CONDITIONS 6. Apply approved topcoat
Store off ground, above 32藲F (0掳C), below 100藲F
(38掳C) and out of direct sunlight. Prior to spraying, Refer to application instructions for more detail.
temperature of THERMO-LAG 2000-P must be a
minimum of 120掳F (49掳C). Refer to the application
instructions and terms and conditions for additional
information.
March 2007
To the best of our knowledge the technical data contained herein is true and accurate on the date of publication and is subject to change without prior notice. User must contact Carboline Company
to verify correctness before specifying or ordering. No guarantee of accuracy is given or implied. We guarantee our products to conform to Carboline quality control. We assume no responsibility for
coverage, performance or injuries resulting from use. Liability, if any, is limited to replacement of products. NO OTHER WARRANTY OR GUARANTEE OF ANY KIND IS MADE BY CARBOLINE,
EXPRESS OR IMPLIED, STATUTORY, BY OPERATION OF LAW, OR OTHERWISE, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Carboline庐 and
THERMO-LAG庐 are registered trademarks of Carboline Company.
THERMO-LAG 2000-P
PLURAL COMPONENT EQUIPMENT THINNERS
Do Not Thin
THERMO-LAG 2000-P is applied using plural component ___________________________________________
equipment as follows:
CLEAN UP
Pump: Hot Water or Toluene
Spray Equipment and Hoses:
Gun, Tips and
Static Mixer: Thinner #2, Toluene, MEK, MIBK,
Air Tech Spray Systems Inc. (Houston, Texas)
or Xylene or steam cleaning
Coverdale Pneumatics Ltd. (Bradford, UK) ___________________________________________
Spray Quip (Houston, Texas - U.S.)
SAFETY PRECAUTIONS
This product must be installed by trained and certified
It is essential that all equipment be properly utilized
applicators in accordance with the advice given on this
and maintained. Poorly maintained equipment may
sheet, application manual (latest edition) and Material
allow the system to go off ratio. We recommend 2
Safety Data Sheet (MSDS).
ratio checks per day.
All work involving application and use of this product
Spray Gun: should be performed in compliance with all relevant
Binks 1M Mastic Airless Gun or equivalent national and local health, safety and environmental
Remove fluid tube and replace with a gun swivel. standards and regulations.
Install Graco tip adapter. Gun must have a non- In the event welding or flame cutting is performed on
diffuser seat metal coated with this product, dust and fumes will be
emitted which will require the use of appropriate
Spray Tips: personal protective equipment and adequate exhaust
ventilation.
Graco Heavy Duty RAC (gray key non-diffuser, non-
cateye type)
Consult Carboline for any further questions or advice.
___________________________________________
Size: 0.035" to 0.065"
DISCLAIMER
revers-a-clean or equal
The technical data contained in this data sheet is
Fan Pattern: 6" to 10"
accurate to the best of our knowledge. No warranty is
(Note: RAC adapter must be used with Graco expressed or implied. For specific warranty
spray tips on a Binks gun) information, refer to terms and conditions, a copy of
which can be obtained upon request.
Hoses:
Delivery: 3/4" ID minimum (100 ft)
Whip: 1/2" ID minimum (20 ft
maximum)
THERMO-LAG 2000-P Protected Steel Column
March 2007
To the best of our knowledge the technical data contained herein is true and accurate on the date of publication and is subject to change without prior notice. User must contact Carboline Company
to verify correctness before specifying or ordering. No guarantee of accuracy is given or implied. We guarantee our products to conform to Carboline quality control. We assume no responsibility for
coverage, performance or injuries resulting from use. Liability, if any, is limited to replacement of products. NO OTHER WARRANTY OR GUARANTEE OF ANY KIND IS MADE BY CARBOLINE,
EXPRESS OR IMPLIED, STATUTORY, BY OPERATION OF LAW, OR OTHERWISE, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Carboline庐 and
THERMO-LAG庐 are registered trademarks of Carboline Company.
|