Page 1 of 4
SAFETY DATA SHEET
Date Issued: 02/27/2006
MSDS No: 30-001.3
Date-Revised: 02/12/2007
Revision No: 2
Ultradent庐 LC Block-Out Resin
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
PRODUCT NAME: Ultradent庐 LC Block-Out Resin
PRODUCT DESCRIPTION: Light Cure Laboratory Block-out and model resin
MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS
CHEMTREC (NORTH AMERICA) :(800) 424 - 9300
Ultradent Products, Inc.
(INTERNATIONAL) :(703) 527 - 3887
505 W. 10200 S.
South Jordan UT 84095
2. COMPOSITION / INFORMATION ON INGREDIENTS
Chemical Name CAS EINECS Classification Content
Diurethane Dimethacrylate 41137-60-4 255-239-5 Xi; R36 R37 R38 74
Triethylene Glycol Dimethacrylate 109-16-0 203-652-6 Xi; R36/37/38 16
( Full text of R-Phrases can be found under heading 16 )
3. HAZARDS IDENTIFICATION
HAZARD DESIGNATION
"Xi" - Irritant
R36/38: Irritating to eyes and skin.
EMERGENCY OVERVIEW
PHYSICAL APPEARANCE: Dark Blue Gel
POTENTIAL HEALTH EFFECTS
EYES: Contact causes severe eye irritation.
SKIN: May cause skin irritation. Allergic reactions are possible.
4. FIRST AID MEASURES
EYES: Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15
minutes. Have eyes examined and tested by medical personnel.
SKIN: Wash with soap and water. Get medical attention if irritation develops or persists.
INGESTION: If swallowed, induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an
unconscious person. Get medical attention immediately.
INHALATION: Remove to fresh air. If not breathing, give artificial respiration or give oxygen by trained personnel. Seek
immediate medical attention.
5. FIRE FIGHTING MEASURES
Page 2 of 4
SAFETY DATA SHEET
Date Issued: 02/27/2006
MSDS No: 30-001.3
Date-Revised: 02/12/2007
Revision No: 2
Ultradent庐 LC Block-Out Resin
FIRE FIGHTING PROCEDURES: As in any fire, wear self-contained breathing apparatus pressure-demand, (MSHA/NIOSH
approved or equivalent) and full protective gear.
FIRE FIGHTING EQUIPMENT: Foam, dry chemical, carbon dioxide (CO2)
6. ACCIDENTAL RELEASE MEASURES
SMALL SPILL: Wipe up with dry cloth and alcohol.
LARGE SPILL: Absorb with inert, damp non-combustible material, then flush area with water.
7. HANDLING AND STORAGE
GENERAL PROCEDURES: Stable when stored and handled under recommended conditions.
HANDLING: Use suitable protective equipment.
STORAGE: Store in a cool dry place.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
PERSONAL PROTECTIVE EQUIPMENT
EYES AND FACE: Wear eye protection.
SKIN: S36/37: Wear suitable protective clothing and gloves.
RESPIRATORY: S51: Use only in well-ventilated areas.
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Gel
ODOR: Acrylic
COLOR: Dark Blue Gel
10. STABILITY AND REACTIVITY
STABILITY: Sensitive to light.
POLYMERIZATION: Polymerization occurs when exposed to visible light, ultraviolet light or extreme heat.
CONDITIONS TO AVOID: Oxidizing materials.
HAZARDOUS DECOMPOSITION PRODUCTS: Carbon Dioxide
11. TOXICOLOGICAL INFORMATION
EYE EFFECTS: Severe eye irritation
Page 3 of 4
SAFETY DATA SHEET
Date Issued: 02/27/2006
MSDS No: 30-001.3
Date-Revised: 02/12/2007
Revision No: 2
Ultradent庐 LC Block-Out Resin
SKIN EFFECTS: Mildly to moderately irritating.
12. ECOLOGICAL INFORMATION
ENVIRONMENTAL DATA: Not defined
ECOTOXICOLOGICAL INFORMATION: No data available. Contact Env. Dept.
13. DISPOSAL CONSIDERATIONS
DISPOSAL METHOD: Dispose of in compliance with governmental regulation (EC 1975L0442-20/11/2003)
14. TRANSPORT INFORMATION
ROAD AND RAIL (ADR/RID)
HAZARD CLASS: 9
PACKING GROUP: III
AIR (ICAO/IATA)
PRIMARY HAZARD CLASS/DIVISION: 9
PACKING GROUP: III
VESSEL (IMO/IMDG)
PRIMARY HAZARD CLASS/DIVISION: 9
PACKING GROUP: III
15. REGULATORY INFORMATION
EUROPEAN COMMUNITY
EEC LABEL SYMBOL AND CLASSIFICATION
"Xi" - Irritant
R36/38: Irritating to eyes and skin.
EUROPEAN COMMUNITY REGULATORY: Not regulated.
16. OTHER INFORMATION
RELEVANT R-PHRASES:
R36/37/38: Irritating to eyes, respiratory system and skin.
PREPARED BY: Iris McCallister
REVISION SUMMARY: Revision #: 2 This MSDS replaces the December 13, 2006 MSDS. Any changes in information are as
follows: In Section 1 MSDS Number
Page 4 of 4
SAFETY DATA SHEET
Date Issued: 02/27/2006
MSDS No: 30-001.3
Date-Revised: 02/12/2007
Revision No: 2
Ultradent庐 LC Block-Out Resin
MANUFACTURER DISCLAIMER: FOR DENTAL USE ONLY: Use as directed.
The information and recommendations are taken from sources (raw material MSDS(s) and manufacturer's knowledge) believed to
be accurate; however, Ultradent Products, Inc., makes no warranty with respect to the accuracy of the information or the suitability
of the recommendation and assumes no liability to any user thereof. Each user should review these recommendations in the
specific context of the intended use and determine whether they are appropriate.
|