Page 1 of 4
SAFETY DATA SHEET
Date Issued: 01/11/2006
MSDS No: 1-001.7
Date-Revised: 09/27/2007
Revision No: 6
Amelogen庐 Plus
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
PRODUCT NAME: Amelogen庐 Plus
PRODUCT DESCRIPTION: Composite restorative material
PRODUCT CODE: GB, GC, GD, GE, GF, GG, GH, GK, GM, GN, GR, GS, GV
MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS
CHEMTREC (NORTH AMERICA) :(800) 424 - 9300
Ultradent Products, Inc.
(INTERNATIONAL) :+1(703) 527 - 3887
505 W. 10200 S.
South Jordan UT 84095
2. COMPOSITION / INFORMATION ON INGREDIENTS
Chemical Name CAS EINECS Classification Content
Bis GMA 001565-94-2 216-367-7 Xi; R36/37/38 ~ 14
( Full text of R-Phrases can be found under heading 16 )
3. HAZARDS IDENTIFICATION
HAZARD DESIGNATION
"Xi" - Irritant
EMERGENCY OVERVIEW
PHYSICAL APPEARANCE: Whitish, odorless, viscous paste
IMMEDIATE CONCERNS: No adverse human effects
POTENTIAL HEALTH EFFECTS
EYES: R36: Irritating to eyes.
SKIN: R38: Irritating to skin.
INGESTION: Harmful if swallowed.
INHALATION: Low hazard for usual industrial or commercial handling.
SIGNS AND SYMPTOMS OF OVEREXPOSURE
EYES: Causes eye irritation.
SKIN: Contact causes skin irritation.
4. FIRST AID MEASURES
EYES: Flush eye with water for 15 minutes. Get medical attention.
SKIN: Wash with soap and water. Get medical attention if irritation develops or persists.
INGESTION: If swallowed, do NOT induce vomiting. Give victim a glass of water or milk. Call a physician or poison control
center immediately. Never give anything by mouth to an unconscious person.
Page 2 of 4
SAFETY DATA SHEET
Date Issued: 01/11/2006
MSDS No: 1-001.7
Date-Revised: 09/27/2007
Revision No: 6
Amelogen庐 Plus
INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical
attention.
5. FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA: Use alcohol foam, carbon dioxide, or water spray when fighting fires involving this material.
FIRE FIGHTING PROCEDURES: As in any fire, wear self-contained breathing apparatus pressure-demand, (MSHA/NIOSH
approved or equivalent) and full protective gear.
6. ACCIDENTAL RELEASE MEASURES
SMALL SPILL: Clean up spills immediately, observing precautions in Protective Equipment section.
LARGE SPILL: After removal, flush contaminated area thoroughly with water.
COMMENTS: Refer particularly to local circumstances and regulations.
7. HANDLING AND STORAGE
HANDLING: Keep away from heat and flame.
STORAGE: Room Temperature
STORAGE TEMPERATURE: 18掳C Minimum to 30掳C Maximum
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
PERSONAL PROTECTIVE EQUIPMENT
EYES AND FACE: Wear safety glasses with side shields (or goggles) and a face shield.
SKIN: S36/37: Wear suitable protective clothing and gloves.
RESPIRATORY: None
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Viscous paste
ODOR: None.
COLOR: Shade dependent.
PHYSICAL STATE COMMENTS: Insoluble in water; partially soluble in organic solvents
10. STABILITY AND REACTIVITY
STABILITY: Light exposure initiates polymerization.
CONDITIONS TO AVOID: Not Applicable
Page 3 of 4
SAFETY DATA SHEET
Date Issued: 01/11/2006
MSDS No: 1-001.7
Date-Revised: 09/27/2007
Revision No: 6
Amelogen庐 Plus
HAZARDOUS DECOMPOSITION PRODUCTS: Carbon Dioxide
11. TOXICOLOGICAL INFORMATION
EYE EFFECTS: May be mildly irritating to eyes.
SKIN EFFECTS: Mildly to moderately irritating.
COMMENTS: None
12. ECOLOGICAL INFORMATION
GENERAL COMMENTS: Not Established
13. DISPOSAL CONSIDERATIONS
DISPOSAL METHOD: Dispose of in compliance with governmental regulation (EC 1975L0442-20/11/2003)
14. TRANSPORT INFORMATION
ROAD AND RAIL (ADR/RID)
LABEL: Not classified
AIR (ICAO/IATA)
LABEL: Not classified
VESSEL (IMO/IMDG)
LABEL: Not classified
15. REGULATORY INFORMATION
EUROPEAN COMMUNITY
EEC LABEL SYMBOL AND CLASSIFICATION
"Xi" - Irritant
S36/39: Wear suitable protective clothing and eye/face protection.
GENERAL COMMENTS: None
16. OTHER INFORMATION
RELEVANT R-PHRASES:R36/37/38: Irritating to eyes, respiratory system and skin.
PREPARED BY: Iris McCallister
Page 4 of 4
SAFETY DATA SHEET
Date Issued: 01/11/2006
MSDS No: 1-001.7
Date-Revised: 09/27/2007
Revision No: 6
Amelogen庐 Plus
REVISION SUMMARY: Revision #: 6 This MSDS replaces the February 08, 2007 MSDS. Any changes in information are as
follows: In Section 1 MSDS Number CHEMTREC MSDS In Section 14 DOT Primary Hazard Class/Division DOT Packing
Group Labels Other DOT Shipping Information TDG Primary Hazard Class/Division TDG Packing Group IMO Label ADR/RID
Hazard Class AIR Label Comments IMO Primary Hazard Class/Division IMO Packing Group AIR Primary Hazard Class/Division
AIR Packing Group TDG Label ADRLABEL Not Found ADRNOTE Not Found ADRPACKGP Not Found
MANUFACTURER DISCLAIMER: FOR DENTAL USE ONLY: Use as directed.
The information and recommendations are taken from sources (raw material MSDS(s) and manufacturer's knowledge) believed to
be accurate; however, Ultradent Products, Inc., makes no warranty with respect to the accuracy of the information or the suitability
of the recommendation and assumes no liability to any user thereof. Each user should review these recommendations in the
specific context of the intended use and determine whether they are appropriate.
|