Page 1 of 4
SAFETY DATA SHEET
Date Issued: 01/23/2007
MSDS No: 131-001.1
Revision No: New MSDS
Tres White Supreme Mint HP PF
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
PRODUCT NAME: Tres White Supreme Mint HP PF
PRODUCT DESCRIPTION: Dental bleaching gel
MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS
CHEMTREC (NORTH AMERICA) :(800) 424 - 9300
Ultradent Products, Inc.
(INTERNATIONAL) :(703) 527 - 3887
505 W. 10200 S.
South Jordan UT 84095
2. COMPOSITION / INFORMATION ON INGREDIENTS
Chemical Name CAS EINECS Classification Content
Carbamide Peroxide 000124-43-6 204-701-4 O, Xn; R22-41 7.5
Hydrogen Peroxide 007722-84-1 231-765-0 O, Xi; R36 7.8
Sodium Fluoride 007681-49-4 231-667-8 T; R25; R32; R36/38 0.25
Potassium Nitrate 007757-79-1 231-818-8 O, Xi; R36/37/38 0.5
( Full text of R-Phrases can be found under heading 16 )
3. HAZARDS IDENTIFICATION
HAZARD DESIGNATION
"O" - Oxidizing
R31: Contact with acids liberates toxic gas.
"Xn" - Harmful
"T" - Toxic
EMERGENCY OVERVIEW
PHYSICAL APPEARANCE: Gel
POTENTIAL HEALTH EFFECTS
EYES: Contact may cause eye irritation.
SKIN: May cause skin irritation.
4. FIRST AID MEASURES
EYES: Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15
minutes. Have eyes examined and tested by medical personnel.
SKIN: Wash with soap and water. Get medical attention if irritation develops or persists.
INGESTION: Give large volumes of water. Do not induce vomiting. Consult a physician if ingested in large amounts.
INHALATION: Remove to fresh air. If not breathing, give artificial respiration or give oxygen by trained personnel. Seek
Page 2 of 4
SAFETY DATA SHEET
Date Issued: 01/23/2007
MSDS No: 131-001.1
Revision No: New MSDS
Tres White Supreme Mint HP PF
immediate medical attention.
5. FIRE FIGHTING MEASURES
FIRE FIGHTING PROCEDURES: General: Evacuate all personnel; use protective equipment for fire-fighting. Use self-contained
breathing apparatus when the product is involved in fire.
FIRE FIGHTING EQUIPMENT: Foam, dry chemical, carbon dioxide (CO2)
6. ACCIDENTAL RELEASE MEASURES
SMALL SPILL: Wipe up small amounts with chemical resistant or damp rag which is washed with large amounts of water after
each use. After cleaning, flush away traces with water.
LARGE SPILL: Absorb with inert, damp non-combustible material, then flush area with water.
7. HANDLING AND STORAGE
HANDLING: Keep away from sources of ignition and direct sunlight.
STORAGE: Keep refrigerated.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
PERSONAL PROTECTIVE EQUIPMENT
EYES AND FACE: Wear eye protection.
SKIN: S36/37: Wear suitable protective clothing and gloves.
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Gel
ODOR: Mint
COLOR: Clear to cloudy
10. STABILITY AND REACTIVITY
STABILITY: Stable when stored and handled under recommended conditions.
POLYMERIZATION: Not Applicable
CONDITIONS TO AVOID: Strong acids, strong bases, and oxidizing agents.
11. TOXICOLOGICAL INFORMATION
ACUTE
Page 3 of 4
SAFETY DATA SHEET
Date Issued: 01/23/2007
MSDS No: 131-001.1
Revision No: New MSDS
Tres White Supreme Mint HP PF
Chemical Name ORAL LD50 (rat)
Carbamide Peroxide 7060 mg/kg
Sodium Fluoride 200 mg/kg
EYE EFFECTS: May be mildly irritating to eyes.
SKIN EFFECTS: May cause slight irritation.
12. ECOLOGICAL INFORMATION
ENVIRONMENTAL DATA: Biodegradability - Not established
13. DISPOSAL CONSIDERATIONS
DISPOSAL METHOD: Dispose of in compliance with governmental regulation (EC 1975L0442-20/11/2003)
14. TRANSPORT INFORMATION
ROAD AND RAIL (ADR/RID)
HAZARD CLASS: 5.1
PACKING GROUP: III
SPECIAL PROVISIONS: 65
AIR (ICAO/IATA)
UN/NA NUMBER: 2984
PRIMARY HAZARD CLASS/DIVISION: 5.1
PACKING GROUP: III
SPECIAL PROVISIONS: 65
VESSEL (IMO/IMDG)
UN/NA NUMBER: 2984
PRIMARY HAZARD CLASS/DIVISION: 5.1
PACKING GROUP: III
LIMITED QUANTITY: 5 L
SPECIAL PROVISIONS: 65
15. REGULATORY INFORMATION
EUROPEAN COMMUNITY
Page 4 of 4
SAFETY DATA SHEET
Date Issued: 01/23/2007
MSDS No: 131-001.1
Revision No: New MSDS
Tres White Supreme Mint HP PF
EEC LABEL SYMBOL AND CLASSIFICATION
"O" - Oxidizing
R31: Contact with acids liberates toxic gas.
"Xn" - Harmful
R41: Risk of serious damage to eyes.
R36/37/38: Irritating to eyes, respiratory system and skin.
"T" - Toxic
R25: Toxic if swallowed.
16. OTHER INFORMATION
RELEVANT R-PHRASES:
R36: Irritating to eyes.
R36/37/38: Irritating to eyes, respiratory system and skin.
PREPARED BY: Iris McCallister
REVISION SUMMARY: New MSDS
MANUFACTURER DISCLAIMER: FOR DENTAL USE ONLY: Use as directed.
The information and recommendations are taken from sources (raw material MSDS(s) and manufacturer's knowledge) believed to
be accurate; however, Ultradent Products, Inc., makes no warranty with respect to the accuracy of the information or the suitability
of the recommendation and assumes no liability to any user thereof. Each user should review these recommendations in the
specific context of the intended use and determine whether they are appropriate.
|