Section 1. Chemical Product and Company Identification
Product Name: Vinyl Compound ?Plastisol Date Issued: 7/27/2009
Product Code: 200 Puff Base, 200PA Puff Additive
202 Puff White
Manufacturer: TW Graphics
Lakeside Plastics Inc. 1175 Florida Central Parkway
450 W 33rd Ave. Suite 3000
Oshkosh, WI 54903 Longwood, Florida 32750
800-901-3051
Section 2. Composition Information
Chemical CAS # % by weight OSHA TWA
Titanium dioxide * 13463-67-7 10.0 ?20.0 15 mg/m3
* Only in 202 Puff White
Section 3. Hazard Identification
Emergency Overview: No immediate effects are anticipated but repeated or prolonged
contact may cause eye or skin irritation.
Eye contact: May cause mild irritation.
Skin contact: Direct contact over a prolonged period may cause irritation.
Ingestion: Can cause gastrointestinal irritation.
Inhalation: Not likely to cause irritation at ambient temperatures. Heating this material
will cause fumes and vapors which can cause irritation of the respiratory tract.
Section 4. First Aid Measures
Eyes: Flush with large amounts of water, holding eyelid open for 15 minutes. If irritation
persists, seek medical attention.
Skin: Wash with soap and water or plain water for 15 minutes. If rash or irritation
develops, seek medical attention.
Inhalation: Remove to fresh air.
Ingestion: Do not induce vomiting. Never give anything by mouth to an unconscious
person.
Medical Conditions Aggravated by Exposure: None known.
Puff 7-27-09 1
Section 5. Fire Fighting Measures
Flash Point: > 200 deg F
OSHA Flammability Classification: Combustible Liquid- Class IIIB
Extinguishing Media: Dry chemical, carbon dioxide, foam.
Special Firefighting Procedures: Wear self-contained breathing apparatus.
Unusual Fire and Explosion Hazards: May generate HCl and oxides of carbon.
Section 6. Accidental Release Measures
Action to be taken in case of release or spill: Contain material and scoop up or soak up
material with absorbent compound. See Section 13 for proper disposal methods.
Section 7. Handling and Storage
Handling: Keep away from heat and flames. Wear protective gloves and safety glasses.
Do not weld or torch cut empty containers without local exhaust and/or
respiratory protection.
Storage: Do not store at elevated temperatures and keep containers closed when not in
use.
Section 8. Exposure Controls/ Personal Protection
Engineering Controls: Provide sufficient mechanical ventilation to maintain exposure
below TLV's.
Respiratory Protective Equipment: Not normally required however if local exhaust is
insufficient to remove fumes or vapors generated during processing, NIOSH
approved respirators may be necessary.
Protective Gloves: Rubber, neoprene or nitrile.
Eye and Face Protection: Industrial safety glasses.
Other Protective Equipment: Use chemical resistant apron or other impervious
clothing, if needed, to avoid contaminating regular clothing which could
result in prolonged or repeated skin contact. An emergency shower should be
readily available.
Ventilation: Local exhaust is recommended.
Section 9. Physical and Chemical Properties
Boiling Range: None Evaporation Rate: Slower than butyl acetate
Vapor Density: Heavier than air. % Volatile by Weight: Less than 2%
Weight per Gallon: 8.0 ?11.0 lb
Puff 7-27-09 2
Section 10. Stability and Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur.
Hazardous Decomposition Products: Hydrogen chloride and oxides of carbon.
Incompatibility: Strong oxidizers.
Conditions to Avoid: Prolonged exposure to temperatures above 300 deg F.
Section 11. Toxicological Information
Toxicity Data: None of the components in this material are listed as a carcinogen by
NTP, IARC or OSHA.
Section 12. Ecological Information
Ecotoxicological Information: No data available.
Section 13. Disposal Considerations
Disposal Method: Dispose of in accordance with local, state and federal regulations.
Section 14. Transportation Information
DOT Shipping Name: Not regulated.
DOT Hazard Class: None
Section 15. Regulatory Information
TSCA Status: All components of this compound are listed on the US TSCA Inventory.
SARA Section 313 Toxic Chemicals: None
Section 16. Other Information
Disclaimer of Expressed and Implied Warranties: The information in this document is believed to be
correct as of the date issued. However, no warranty of fitness for any particular purpose, or any other
warranty is expressed or is to be implied regarding the accuracy or completeness of this information, the
results to be obtained from the use of this information or the product, the safety of this product, or the
hazards related to its use. This information and product are furnished on the condition that the person
receiving them shall make his own determination as to the suitability of the product for his particular
purpose and on condition that he assume the risk of his use thereof.