Product Class CAULK
Trade Name POLYSEAMSEAL
Product Code ---
SECTION II - INGREDIENT AND HAZARD INFORMATION
Hazardous Ingredient Name CAS Number Percent TSCA
N-Butyl Acetate 0123-86-4 < 5.0 Y
Titanium Dioxide ** 13463-67-7 < 2.0 Y
Ingredient Notes:
Remaining ingredients are not considered OSHA hazardous.
**The main hazard for Titanium Dioxide is dust inhalation. Because of
its incorporation into the caulk, exposure by inhalation is unlikely.
-----------------------------------
SECTION III - PHYSICAL AND CHEMICAL PROPERTIES
Form: High viscosity caulk
Appearance/Color: White & colors
Odor: Banana odor
Solubility (in water): yes
pH Value, +/-.3: 7.5
Boiling Range: 212.鳩 (100.鳦)
--------------------------------------------------------------------------------
MATERIAL SAFETY DATA SHEET
MSDS Name: POLYSEAMSEAL(R) ALL-PURPOSE ADHESIVE CAULK
MSDS Number: sD11511
Version Number 2
MSDS Date: NOV-11-2002
----------------------------------
SECTION IV - FIRE FIGHTING MEASURES (Flash,UEL,LEL for solvent only)
Flammability Class N/A
Flash Range: Not Available
Explosive Range (LEL/UEL): Not Applicable
EXTINGUISHING MEDIA:
Dry chemical -- Carbon Dioxide -- Foam -- Water Fog
Will not burn in wet state.
SPECIAL FIRE-FIGHTING PROCEDURES:
Water may be used to cool and protect exposed containers.
Caution should be taken because uncured material is water soluble.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
Any closed container may burst when exposed to extreme
heat or fire.
----------------------------------
SECTION V - HEALTH HAZARD DATA
ROUTES OF ENTRY:
ENTRY THROUGH...Inhalation and skin most likely
CARCINOGENICITY...
NTP? N/E | IARC Monographs? N/E | OHSA? NO
EFFECTS OF OVEREXPOSURE
Inhalation: May cause nose or throat irritation.
Skin/Eye Contact: May cause irritation.
Ingestion: Swallowing large amounts may cause nausea,
vomiting. ( an unlikely route of entry )
FIRST AID MEASURES
--------------------------------------------------------------------------------
MATERIAL SAFETY DATA SHEET
MSDS Name: POLYSEAMSEAL(R) ALL-PURPOSE ADHESIVE CAULK
MSDS Number: sD11511
Version Number 2
MSDS Date: NOV-11-2002
Page Number: 3
-----------------------------------------------------------------------------
Inhalation: If affected by inhalation, remove to fresh air.
Eye Contact: Flush with water for at least 15 minutes, and
get prompt medical attention.
Skin Contact: Wash skin thoroughly with soap and water.
Ingestion: Drink water, and get medical attention.
-------------------------------------------------------------------
N/A= Not applicable N/AV=Not available N/E, N/est=Not established
-------------------------------------------------------------------
CHRONIC HAZARDS
Butyl Acetate: Vapor harmful. May affect brain and nervous system
causing dizziness, headaches or nausea. May cause severe eye
irritation upon eye contact.
NOTICE: Reports have associated repeated and prolonged
occupational overexposure to solvents with permanent brain,
nervous system, liver or kidney damage or may cause cardiac
arrhythmia. INTENTIONAL misuse of this product by
deliberately inhaling its vapors may be harmful or fatal.
-----------------------------------
SECTION VI - STABILITY AND REACTIVITY
Stability: This product is stable
Hazardous Polymerization: Hazardous polymerization will not occur
INCOMPATABILITY:
None
CONDITIONS TO AVOID:
None
HAZARDOUS DECOMPOSITION PRODUCTS:
May produce oxides of carbon and oxides of nitrogen when burned.
-----------------------------------
SECTION VII - ACCIDENTAL RELEASE AND DISPOSAL MEASURES:
STEPS TO BE TAKEN IN CASE OF SPILL:
Wear appropriate protective clothing. Add dry absorbent and
shovel or sweep up. Place in an appropriate container and seal.
WASTE DISPOSAL METHOD:
Dispose of in accordance with Federal, State, and Local regulations.
-----------------------------------
SECTION VIII - EXPOSURE CONTROLS/PERSONAL PROTECTION
RESPIRATORY PROTECTION:
NIOSH respirators recommended if vapors and mists are generated.
VENTILATION:
Local exhaust is recommended for safe practice.
PROTECTIVE CLOTHING:
Gloves and clothing should be worn to prevent repeated skin contact.
EYE PROTECTION:
Splashproof goggles or safety glasses should be worn.
HANDLING AND STORAGE PRECAUTIONS:
Keep from freezing. Keep away from heat.
Keep containers closed when not in use.
Avoid prolonged or repeated contact with skin.
Keep out of the reach of children.
-----------------------------------
SECTION IX - TRANSPORT INFORMATION:
DOT CLASSIFICATIONS FOR ONE GALLON AND UNDER CONTAINERS
DESCRIPTION: Non-hazardous
DOT CLASSIFICATIONS for OVER 1 GALLON size CONTAINERS
DESCRIPTION: Non-hazardous, Caulking product
-----------------------------------
SECTION X - REGULATORY INFORMATION:
The following ingredients are registered for TSCA 12B
Ingredient Name CAS Number Percent
N-Butyl Acetate 0123-86-4 4.76
The components fit the EPA Hazard Category definition of
Immediate (Acute) and Delayed (Chronic) Health Hazards
under SARA Sections 311, 312.
All chemical substances are TSCA listed.
SARA Section 313 toxic chemicals: NONE above the de minimis
--------------------------------------------------------------------------------
MATERIAL SAFETY DATA SHEET
MSDS Name: POLYSEAMSEAL(R) ALL-PURPOSE ADHESIVE CAULK
MSDS Number: sD11511
Version Number 2
MSDS Date: NOV-11-2002
Page Number: 5
-----------------------------------------------------------------------------
reporting thresholds.
California PROP.65 Chemicals: none known
DISCLAIMER:
The information contained herein is based on data available as of
the date of preparation of this MSDS and which we believe to be
reliable. However, no warranty is expressed or implied regarding
the accuracy of the data. We shall not be responsible for the use
of this information, or of any product, method, or apparatus men-
tioned, and the user must make his own investigation to determine
the suitability of the information or products for his particular
purpose, for the protection of the environment, and the health and
safety of the users of this material.
--------------------------------------------------------------------------------
Last Page