Condensate, Sour MSDS
1. PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: Condensate, Sour
SYNONYMS: Sour Condensate
CHEMICAL NAME: Petroleum
CHEMICAL FAMILY: Petroleum Hydrocarbon
PRODUCT USE: Refinery feedstock
SUPPLIER: Plains Marketing Canada L.P. and affiliates
Suite 1400, 607 Eighth Avenue S.W.
Calgary, Alberta, Canada T2P 0A7
Emergency Telephone: 1-866-875-2554
Canutec (613) 996-6666 or *666 Cellular
2. COMPOSITION/INFORMATION ON INGREDIENTS
Ingredient Name % CAS # ACGIH TLV
Condensate 100 68919-39-1 Oil mist (if generated)
ACGIH TLV-TWA= 5mg/m3
ACGIH TLV-STEL= 10mg/m3
Benzene 0.1 to 1.5 71-43-2 ACGIH TLV-TWA= 0.5 ppm (skin)
ACGIH TLV-STEL= 2.5 ppm
Toluene 1 to 5 108-88-3 ACGIH TLV-TWA= 20 ppm (skin)
Ethylbenzene 1 to 5 100-41-4 ACGIH TLV-TWA= 100 ppm
ACGIH TLV-STEL= 125 ppm
Xylene, mixed isomers 1 to 5 1330-20-7 ACGIH TLV-TWA= 100 ppm
ACGIH TLV-STEL= 150 ppm
Sulfur 15 to 30 7704-34-9 ACGIH TLV-TWA= 10 ppm
ACGIH TLV-TWA= 15 ppm
Hydrogen Sulphide 0.1 to 5 7783-06-4 ACGIH TLV-TWA= 10 ppm
ACGIH TLV-TWA= 15 ppm
Iso-Pentane 3 to 7 78-78-4 ACGIH TLV-TWA= 600 ppm
n-Pentane 5 to 10 109-66-0 ACGIH TLV-TWA= 600 ppm
n-Hexane 7 to 13 110-54-3 ACGIH TLV-TWA= 50 ppm (skin)
Heptane 10 to 30 142-82-5 ACGIH TLV-TWA= 400 ppm
Octane 7 to 13 111-65-9 ACGIH TLV-TWA= 300 ppm
Nonane 7 to 13 111-84-2 ACGIH TLV-TWA= 200 ppm
Decane 5 to 10 124-18-5 Not applicable
Undecane 3 to 7 1120-21-4 Not applicable
Dodecane 1 to 5 112-40-3 Not applicable
Tridecane 1 to 5 629-50-5 Not applicable
Tetradecane 1 to 5 629-59-4 Not applicable
Pentadecane 1 to 5 629-62-9 Not applicable
Methylcyclopentane 1 to 5 96-37-7 Not available
Cyclohexane 1 to 5 110-82-7 ACGIH TLV-TWA= 100 ppm
Methylcyclohexane 3 to 7 108-87-2 ACGIH TLV-TWA= 400 ppm
Condensate is a liquid hydrocarbon product associated with Natural Gas and is used as refinery feedstock for the
crude or condensate units. Sour condensate contains >0.5% dissolved hydrogen sulphide. This product is a
commingled stream from multiple petroleum facilities and is a complex mixture consistent with the definition within
WHMIS regulation CPR section 2. The listed components are provided as guidance based on the available
knowledge of the commingled stream.
Issue date: June 30, 2008 Page 1 of 8
Plains Marketing Canada Condensate, Sour MSDS
3. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
DANGER!!
EXTREMELY FLAMMABLE- MAY EVOLVE TOXIC AND FLAMMABLE HYDROGEN SULPHIDE GAS
- EYE, SKIN AND MUCOUS MEMBRANE IRRITANT - EFFECTS CENTRAL NERVOUS SYSTEM -
HARMFUL OR FATAL IF SWALLOWED - ASPIRATION HAZARD.
High fire hazard. Keep away from heat, spark, open flame, and other ignition sources.
HYDROGEN SULPHIDE (toxic gas) may be released. High concentration may cause immediate
unconsciousness - death may result unless victim is promptly and successfully resuscitated.
Avoid prolonged breathing of vapors or mists. Inhalation may cause irritation, anesthetic effects (dizziness,
nausea, headache, intoxication), and respiratory system effects. Contains benzene, which can cause blood
disease, including leukemia. Benzene, Hexane and Toluene are readily absorbed through intact skin.
POTENTIAL HEALTH EFFECTS
ROUTE(S) OF ENTRY
Eyes: Yes Skin: Yes Inhalation: Yes Ingestion: Yes
EYES
MODERATE TO SEVERE IRRITANT. Liquids and vapors may cause irritation to the eyes, conjunctiva, and
mucous membranes, causing redness and tearing. Splashing of liquid into the eyes will cause smarting and pain.
SKIN
SLIGHT TO MODERATE IRRITANT. Contact may cause irritation to the skin and mucous membranes upon
prolonged and/or repeated skin contact. Liquid may be absorbed through the skin in toxic amounts if large areas of
skin are exposed. Prolonged or repeated contact to petroleum oil with skin may cause defatting of the skin leading to
redness, itching, inflammation, cracking, dermatitis (rash), and possible secondary infection. High-pressure skin
injections are serious medical emergencies. The appearance of injury may be delayed for a few hours, but may
cause tissue to become swollen, discolored and extremely painful.
INGESTION
The major health threat of ingestion occurs from the danger of aspiration (breathing) of liquid drops into the lungs,
particularly from vomiting. Aspiration may result in chemical pneumonia (fluids in the lungs), severe lung damage,
respiratory failure and even death. Ingestion may cause gastrointestinal disturbances, such as irritation, nausea,
vomiting and diarrhea, and central nervous system effects. Acute symptoms of ingestion are most common,
including excitation, restlessness, euphoria, nausea, headache, dizziness, drowsiness, blurred vision, reduced
coordination, and fatigue. In more severe cases, tremors, convulsions, loss of consciousness, coma, respiratory
arrest, and death may occur.
INHALATION
Vapors may cause nose and throat irritation, anesthetic effects and central nervous system (CNS) depression.
Inhalation may result in nausea, dizziness, drowsiness, headaches, and other symptoms similar to those listed under
"Ingestion". Certain ingredients may produce systemic effects to the blood, liver, kidneys, central nervous system
and cardiovascular system. Inhalation of high concentrations can cause rapid CNS depression, cardiac arrhythmia,
unconsciousness, coma, and possibly death resulting from respiratory failure.
WARNING: Irritating and toxic hydrogen sulphide gas may be released. At high concentrations (500 - 1000 ppm),
hydrogen sulphide acts as a systemic poison, causing unconsciousness and death. In lower concentrations (50 - 500
ppm), hydrogen sulphide acts as a respiratory irritant, and may cause fluid in the lungs or bronchial pneumonia. The
rotten egg odor of hydrogen sulphide is not a reliable indicator for warning of exposure, since olfactory fatigue (loss
of smell) readily occurs, especially at concentrations above 50 ppm.
Issue date: June 30, 2008 Page 2 of 8
Plains Marketing Canada Condensate, Sour MSDS
WARNING: The burning of any hydrocarbon as a fuel in an area without adequate ventilation may result in
hazardous levels of combustion products, including carbon monoxide, and inadequate oxygen levels, which may
cause unconsciousness, suffocation, and death.
CHRONIC EFFECTS/CARCINOGENICITY
Contains carcinogens according to IARC, NTP, ACGIH and OSHA. Contains benzene; a regulated human
carcinogen. Benzene is recognized as having the potential to cause anemia and other blood diseases, including
leukemia, after repeated and prolonged exposure.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE
Irritation from skin exposure may aggravate existing open wounds, skin disorders, and dermatitis (rash) conditions.
Chronic respiratory disease, liver or kidney dysfunction, or pre-existing central nervous system disorders may be
aggravated by exposure.
4. FIRST AID MEASURES
EYES
In case of contact with eyes, immediately flush with clean, low-pressure water for at least 15 min. Hold eyelids open
to ensure adequate flushing. Seek medical attention.
SKIN
Remove contaminated clothing. Wash contaminated areas thoroughly with soap and water or waterless hand
cleanser. Obtain medical attention if irritation or redness develops. High-pressure injections are serious medical
emergencies - seek immediate medical attention.
INGESTION
DO NOT INDUCE VOMITING BECAUSE OF DANGER OF BREATHING LIQUID INTO LUNGS. Seek
immediate medical attention. Rinse mouth with water. Administer 1 to 2 glasses of water or milk to drink. Never
administer liquids to an unconscious person. If spontaneous vomiting occurs, lean victim forward to reduce the risk
of aspiration. Seek medical attention. Monitor for breathing difficulty.
INHALATION
Remove person to fresh air. If person is not breathing, ensure an open airway and administer CPR. If necessary,
provide additional air or oxygen once breathing is restored if trained to do so. Seek medical attention immediately.
5. FIRE FIGHTING MEASURES
FLAMMABLE PROPERTIES
-20oC to 93.3 oC (-4 to 200 oF)(Flash point are in the flammable range but are highly
FLASH POINT:
dependent on condensate. This is a commingled stream of condensates from various
producers.
FIRE AND EXPLOSION HAZARDS
EXTREMELY FLAMMABLE. This is a commingled petroleum stream from various locations and producers the
actual flammable characteristics are difficult to predict but this product should be considered as an extremely
flammable liquid. Vapors may be ignited rapidly when exposed to heat, spark, open flame or other source of
ignition. When mixed with air and exposed to an ignition source, flammable vapors can burn in the open or explode
in confined spaces. Being heavier than air, vapors may travel long distances to an ignition source and flash back.
Runoff to sewer may cause fire or explosion hazard. Liquids will float on water. Liquid may accumulate static
charge.
EXTINGUISHING MEDIA
SMALL FIRES: Any extinguisher suitable for Class B fires - dry chemical, CO2, water spray, fire foam, or Halon.
LARGE FIRES: Water spray, fog or fire foam. Water may be ineffective for fighting the fire, but may be used to
cool fire-exposed containers.
Issue date: June 30, 2008 Page 3 of 8
Plains Marketing Canada Condensate, Sour MSDS
FIRE FIGHTING INSTRUCTIONS
Small fires in the incipient (beginning) stage may typically be extinguished using handheld portable fire
extinguishers and other fire fighting equipment.
Fire fighting activities that may result in potential exposure to high heat, smoke or toxic byproducts of combustion
should require approved self-contained breathing apparatus (SCBA) with full-facepiece and full protective
firefighting clothing.
Isolate area around container involved in fire. Cool tanks, shells, and containers exposed to fire and excessive heat
with water. If leak or spill has not ignited, ventilate area and determine if water spray would assist in dispersing gas
or vapor to protect personnel attempting to stop leak. Water may be useful in flushing spills away from ignition
sources; however, do NOT flush petroleum products down public sewers or other drainage systems.
For massive fires the use of unmanned hose holders or monitor nozzles may be advantageous to further minimize
personnel exposure. Major fires may require withdrawal, allowing the tank to burn. Large storage tank fires
typically require specially trained personnel and equipment to extinguish the fire, often including the need for
properly applied fire fighting foam. Refer to NAERG Guide 128.
6. ACCIDENTAL RELEASE MEASURES
ACTIVATE YOUR FACILITY'S SITE SPECIFIC EMERGENCY RESPONSE PLAN if available.
Evacuate nonessential personnel and remove or secure all ignition sources for 300m (1000ft). Consider wind
direction; stay upwind and uphill, if possible. Evaluate the direction of product travel, diking, sewers, etc. to
confirm spill areas. Hydrogen sulphide may be evolved during a release, ensure response personnel are adequately
protected - see Section 8 for personal protection.
Carefully contain and stop the source of the spill, if safe to do so. Do not flush down sewer or drainage systems.
Protect bodies of water by diking, if possible. The use of fire fighting foam may be useful in certain situations to
reduce vapors.
SMALL SPILLS: Take up with sand or other oil absorbing materials. Carefully shovel, scoop or sweep up into a
waste container for reclamation or disposal. Cleanup crews must be properly trained and must utilize proper
protective equipment.
LARGE SPILLS: Dike far ahead of the spill. The proper use of water spray may effectively disperse product vapors
or the liquid itself, preventing contact with ignition sources or areas /equipment that require protection.
Consideration should be given to environmental clean-up and waste material generation when determining if the use
of large volumes of water is appropriate for non-fire emergency situations. Cleanup crews must be properly trained
and must utilize proper protective equipment. Notify regulatory authorities. Refer to NAERG Guide 128.
7. HANDLING AND STORAGE
HANDLING PRECAUTIONS
Handle as a flammable liquid. Keep away from heat, sparks, and open flame. No smoking or open flame in storage,
use of handling areas. Keep containers closed and clearly labeled. Ground all drums and transfer vessels when
handling. Empty product containers or vessels may contain explosive vapors. Do not pressurize, cut, heat, weld or
expose such containers to sources of ignition. Use only with adequate ventilation. Avoid breathing vapors. Wash
thoroughly after handling. Electrical equipment should be approved for classified area. DO NOT siphon by mouth.
STORAGE PRECAUTIONS
Store in a well ventilated area. This storage area should comply with NFPA 30. Avoid storage near incompatible
materials.
Issue date: June 30, 2008 Page 4 of 8
Plains Marketing Canada Condensate, Sour MSDS
WORK/HYGIENIC PRACTICES
Emergency eye wash capability should be available in the vicinity of any potential splash exposure. Use good
personal hygiene practices. Avoid repeated and/or prolonged skin exposure. Wash hands before eating, drinking,
smoking, or using toilet facilities. Do not eat, drink or smoke in areas of use or storage. Do not use gasoline or
solvents (naphtha, kerosene, etc) for washing this product from exposed skin areas. Waterless hand cleansers are
effective.
Promptly remove contaminated clothing and launder before reuse. Use care when laundering to prevent the
formation of flammable vapors which could ignite via washer or dryer. Consider the need to discard contaminated
leather shoes and gloves.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
ENGINEERING CONTROLS
Use adequate ventilation to keep vapor and mist concentrations of this product below occupational exposure and
flammability limits, particularly in confined spaces. Use explosion-proof equipment and lighting in
classified/controlled areas.
EYE/FACE PROTECTION
Faceshield or chemical splash goggles are recommended where there is a possibility of splashing or spraying.
SKIN PROTECTION
Avoid repeated or prolonged skin contact. Gloves constructed of nitrile, neoprene, or PVC are recommended.
Chemical protective clothing such as of poly-coated or equivalent recommended based on degree of exposure.
Note: The resistance of specific materials may vary from product to product as well as degree of exposure. Consult
manufacturer specifications for further information.
RESPIRATORY PROTECTION
For hydrogen sulphide hazard (above H2S permissible exposure limits): SCBA or a supplied air respirator must be
used.
If exposure assessment indicates NO reduced oxygen content or hydrogen sulphide hazard (below H2S exposure
limit): NIOSH/MSHA - approved air-purifying respirator with organic vapor cartridges or canister may be
permissible under certain circumstances where airborne concentrations are or may be expected to exceed exposure
limits or for odor or irritation. Protection provided by air-purifying respirators is limited and should not be
considered especially when odor cannot be used to determine respirator effectiveness. Use a positive pressure, air-
supplied respirator if there is a potential for uncontrolled release, exposure levels are not known, or any other
circumstance where an air-purifying respirator may not provide adequate protection.
Refer to CSA Standard "Selection, Use and Care of Respirators" (Z94.4-02) and NIOSH Respirator Decision Logic
for additional guidance on respiratory protection.
9. PHYSICAL AND CHEMICAL PROPERTIES
BASIC PHYSICAL PROPERTIES
APPEARANCE
Generally a thin yellow to brown liquid.
ODOR
A hydrocarbon odor. If present Hydrogen Sulphide (H2S) has a rotten egg odor, but should not be used as warning
property of toxic levels because H2S can overwhelm and deaden the sense of smell. The smell of H2S should not be
used as an indicator of a hazardous condition - a calibrated H2S meter can be used to determine the concentration of
H2S.
PHYSICAL STATE: Liquid
-20 to 1100 oC (-4 to 2012 oF)
BOILING POINT:
VAPOR PRESSURE: variable
Issue date: June 30, 2008 Page 5 of 8
Plains Marketing Canada Condensate, Sour MSDS
VAPOR DENSITY (Air = 1): 3 to 5
SPECIFIC GRAVITY: 0.7 to 0.85 (water - 1.0):
SOLUBILITY (H2O): Insoluble to slightly soluble
PARTITION COEFFICIENT: Log Kow 2 to 6
10. STABILITY AND REACTIVITY
STABILITY: Stable
CONDITIONS TO AVOID (STABILITY)
Material is stable under normal conditions. Avoid high temperatures, open flames, sparks, welding, smoking and
other ignitions sources.
INCOMPATIBLE MATERIALS
Keep away from strong oxidizers, ignition sources and heat.
HAZARDOUS DECOMPOSITION PRODUCTS
Carbon monoxide, carbon dioxide and non-combusted hydrocarbons (smoke). Contact with nitric and sulfuric acids
will form nitrocresols that can decompose violently.
HAZARDOUS POLYMERIZATION: Will Not Occur.
11. TOXICOLOGICAL INFORMATION
ACUTE EFFECTS
Potential short-term effects of exposure are: irritation eyes, skin, nose, mucous membrane, respiratory system.
Repeated or prolonged skin exposure to petroleum oils may cause various skin disorders, such as contact or
eczematous dermatitis, folliculitis, oil acne, lipid granuloma, melanosis, and rarely precancerous warts on the
forearms, backs of hands or scrotum. Contains Benzene, Hexane and Toluene are readily absorbed through intact
skin and have Skin Notations by ACGIH.
ACUTE ORAL EFFECTS
Ingredient CAS No LD50 LC50
Condensate 68919-39-1 Dermal Toxicity > 2000 Not available
mg/kg Not available
Toluene 108-88-3 Rat oral 5000 mg/kg 400 ppm/4hr
Rat oral 3500 mg/kg
Ethyl benzene 100-41-4 Rabbit skin 17,800 mg/kg Not available
Xylene, mixed 1330-20-7 Mouse oral 1590 mg/kg Rat inhalation: 6,350 ppm/4 hr
isomers
Benzene 71-43-2 Rat oral 3306 mg/kg Rat ihl 10,000 ppm/7 hr
Rat inhalation 380 mg/ cu m > 960
Hydrogen Sulphide 7783-06-4 Not applicable min
Iso-Pentane 78-78-4 Not available LC50 140000ppm/2 hrs mice
LD50 Mouse intravenous 446
n-Pentane 109-66-0 Not available mg/kg.
LD50 Rat (older adult) oral LC50 Mouse inhalation 48000
n-Hexane 110-54-3 43.5 mg/kg BW ppm/4 hr
Heptane 142-82-5 Not available Not available
Octane 111-65-9 Not available LC50 Rat inhalation 118 g/cu m/4 hr
Nonane 111-84-2 Not available LC50 Rat inhalation 3200 ppm/4 hr
Decane 124-18-5 Not available LC50 Mice inhalation 72.3 mg/l/2 hr
Undecane 1120-21-4 LD50 Mouse iv 517 mg/kg Not available
Dodecane 112-40-3 Not available Not available
Tridecane 629-50-5 LD50 iv Mouse 1161 mg/kg Not available
Tetradecane 629-59-4 Not available Not available
Issue date: June 30, 2008 Page 6 of 8
Plains Marketing Canada Condensate, Sour MSDS
Pentadecane 629-62-9 LD50 iv Mouse 3493 mg/kg Not available
Methylcyclopentane 96-37-7 N Av Not available
Cyclohexane 110-82-7 LD50 Mouse oral 1.30 g/kg Not available
LC25 Rabbit inhalation 7300 ppm, 6
methylcyclohexane 108-87-2 Not available hr/day, 5 day/wk, 2 wk
CHRONIC EFFECTS/CARCINOGENICITY
Product contains benzene. Human health studies indicate that prolonged and/or repeated overexposure to benzene
may cause damage to the blood forming system (particularly bone marrow), and serious blood disorders, such as
leukemia. Benzene is listed by the National Toxicology Program (NTP), International Agency for Research on
Cancer (IARC), and ACGIH as carcinogenic in humans.
Other potential chronic effects of exposure are : irritation eyes, skin, nose, mucous membrane, reproductive
pregnancy loss, cardiac arrythmias and CNS depression, polyneuropathy characterized by muscle weakness, loss of
sensation, and impaired gait, respiratory system; dizziness, giddiness, vertigo, anorexia, vomiting, abdominal pain;
dermatitis, excitement, confusion, euphoria, drowsiness, incoordination, staggered gait; corneal vacuolization;
anorexia, nausea, vomiting, abdominal pain; dermatitis; lassitude (weakness, exhaustion), headache; dilated pupils,
lacrimation (discharge of tears); anxiety, muscle fatigue, insomnia; paresthesia; liver, kidney damage, bone marrow
depression; [potential occupational carcinogen], apnea, coma, convulsions; conjunctivitis, eye pain, photophobia
(abnormal visual intolerance to light), corneal vesiculation; irritability, insomnia; gastrointestinal disturbance
narcosis, coma, polyneuropathy characterized by muscle weakness, loss of sensation, and impaired gait.
Similar products produced skin cancer and skin tumors in laboratory animals following repeated applications.
Condensates may contain some PAH's, which have been shown to be carcinogenic after repeated or prolonged skin
contact in laboratory animals
12. ECOLOGICAL INFORMATION
Keep out of sewage, drainage and waterways. Report spills and releases, as applicable, under federal, provincial and
local regulations.
13. DISPOSAL CONSIDERATIONS
Maximize product recovery for reuse or recycling. Contaminated materials may be classified as a hazardous waste
due to the low flash point and benzene. Empty containers can have residues that are subject to hazardous waste
disposal requirements. Dispose of waste in accordance with all applicable federal, provincial, and/or local
regulations.
14. TRANSPORT INFORMATION
PROPER SHIPPING NAME: Petroleum Crude Oil
TDG CLASS: 3
TDG IDENTIFICATION NUMBER: UN1267
TDG SHIPPING LABEL: Flammable Liquid
SHIPPING DESCRIPTION: Petroleum Crude Oil, 3, UN1267, PGI
15. REGULATORY INFORMATION
WORKPLACE HAZARDOUS MATERIALS INFORMATION SYSTEM (WHMIS)
Workplace Hazardous Materials Information Systems (WHMIS): This product has been classified in accordance
with the hazard criteria of the CPR (Controlled Product Regulations), and the MSDS contains all of the information
required by the CPR.
Issue date: June 30, 2008 Page 7 of 8
Plains Marketing Canada Condensate, Sour MSDS
Class B, Division 2 (Flammable Liquid)
D1A - Very Toxic Material Causing Immediate and Serious Toxic Effects
Class D, Division 2, Subdivision A (Very toxic by other means)
Class D, Division 2, Subdivision B(Toxic by other means)
This substance is listed on the Canadian Domestic Substances List (DSL).
16. OTHER INFORMATION
Issued by: Health and Safety Department, Plains Marketing Canada Telephone 403-261-7457
Technical Development by Deerfoot Consulting Inc. Telephone 403-720-3700
NFPA HAZARD RATING - HEALTH: 3 High
FIRE: 3 High
REACTIVITY: 0 Negligible
Acronyms:
ANSI = American National Standards Institute
ACGIH = American Conference of Governmental Industrial Hygienists
API = American Petroleum Institute
CSA = Canadian Standards Association
HMIS = Hazardous Materials Information System
MSHA = Mine Safety and Health Administration
NAERG = North American Emergency Response Guide
NFPA = National Fire Protection Association
NIOSH = National Institute of Occupational Safety and Health
NTP = National Toxicology Program
OSHA = U.S. Occupational Safety & Health Administration
PAH = Poly-Aromatic Hydrocarbons
ppm = parts per million (volume/volume)
SCBA = Self-Contained Breathing Apparatus
STEL = Short Term Exposure Limit
TLV = Threshold Limit Value
TWA = Time Weighted Average
WHMIS = Workplace Hazardous Materials Information System - Canadian
Disclaimer of Expressed and Implied Warranties
The information presented in the Material Safety Data Sheet is based on data believed to be accurate as of the date
this Material Safety Data Sheet was prepared. However, neither Plains Marketing Canada A Division of PMC
(Nova Scotia) Company or Deerfoot Consulting Inc. or any of their subsidiaries assumes any liability whatsoever for
the accuracy or completeness of the information contained herein. No responsibility is assumed for any damage or
injury resulting from abnormal use or from any failure to adhere to recommended practices. The information
provided above, and the product, are furnished on the condition that the person receiving them shall make their own
determination as to the suitability of the product for their particular purpose and on the condition that they assume
the risk of their use.
Issue date: June 30, 2008 Page 8 of 8
|