ALL-RUBBER KONTACT AR101
Chemwatch Material Safety Data Sheet
Issue Date: 19-Dec-2008 CHEMWATCH 18-6176
C9317EC Version No:2.0
CD 2008/4 Page 1 of 8
Section 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME
ALL-RUBBER KONTACT AR101
PROPER SHIPPING NAME
ADHESIVES
PRODUCT USE
?The use of a quantity of material in an unventilated or confined space may result in increased exposure and
an irritating atmosphere developing.
Before starting consider control of exposure by mechanical ventilation.
Rubber based adhesive.
SUPPLIER
Company: All Rubber
Address:
21 Midas Road
Malaga
WA, 6090
AUS
Telephone: +61 8 9249 5622
Fax: +61 8 9249 5676
Section 2 - HAZARDS IDENTIFICATION
STATEMENT OF HAZARDOUS NATURE
HAZARDOUS SUBSTANCE. DANGEROUS GOODS. According to the Criteria of NOHSC, and the ADG Code.
POISONS SCHEDULE
S5
RISK SAFETY
?Highly flammable. ?Keep away from sources of ignition. No smoking.
?Harmful by inhalation. ?Do not breathe gas/fumes/vapour/spray.
?Irritating to eyes and skin. ?Use only in well ventilated areas.
?Harmful: danger of serious damage to health ?Keep container in a well ventilated place.
by prolonged exposure through inhalation.
?Harmful to aquatic organisms may cause long- ?Avoid exposure - obtain special instructions
term adverse effects in the aquatic before use.
environment.
?Possible risk of impaired fertility. ?Do not empty into drains.
?Possible risk of harm to the unborn child. ?To clean the floor and all objects contaminated
by this material use water and detergent.
?HARMFUL- May cause lung damage if swallowed. ?Keep container tightly closed.
?Vapours may cause drowsiness and dizziness. ?Keep away from food drink and animal feeding
stuffs.
?In case of contact with eyes rinse with plenty
of water and contact Doctor or Poisons Information
Centre.
?If swallowed IMMEDIATELY contact Doctor or
Poisons Information Centre. (show this container
or label).
?This material and its container must be disposed
of as hazardous waste.
Section 3 - COMPOSITION / INFORMATION ON INGREDIENTS
NAME CAS RN %
ethyl acetate 141-78-6 10-40
naphtha petroleum, light aliphatic solvent 64742-89-8. 10-40
1, 2, 4- trimethyl benzene 95-63-6 <20
n- hexane 110-54-3 <15
xylene 1330-20-7 <10
additives nonhazardous 10-30
continued...
ALL-RUBBER KONTACT AR101
Chemwatch Material Safety Data Sheet
Issue Date: 19-Dec-2008 CHEMWATCH 18-6176
C9317EC Version No:2.0
CD 2008/4 Page 2 of 8
Section 4 - FIRST AID MEASURES
SWALLOWED
?- If swallowed do NOT induce vomiting.
- If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to
maintain open airway and prevent aspiration.
- Observe the patient carefully.
- Never give liquid to a person showing signs of being sleepy or with reduced awareness; i.e. becoming
unconscious.
EYE
?If this product comes in contact with the eyes:
- Immediately hold eyelids apart and flush the eye continuously with running water.
- Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and moving the eyelids by
occasionally lifting the upper and lower lids.
- Continue flushing until advised to stop by the Poisons Information Centre or a doctor, or for at least 15
minutes.
- Transport to hospital or doctor without delay.
SKIN
?If skin contact occurs:
- Immediately remove all contaminated clothing, including footwear.
- Flush skin and hair with running water (and soap if available).
- Seek medical attention in event of irritation.
INHALED
?- If fumes or combustion products are inhaled remove from contaminated area.
- Other measures are usually unnecessary.
NOTES TO PHYSICIAN
?For acute or short term repeated exposures to petroleum distillates or related hydrocarbons:
- Primary threat to life, from pure petroleum distillate ingestion and/or inhalation, is respiratory failure.
- Patients should be quickly evaluated for signs of respiratory distress (e.g. cyanosis, tachypnoea,
intercostal retraction, obtundation) and given oxygen. Patients with inadequate tidal volumes or poor
arterial blood gases (pO2 50 mm Hg) should be intubated.
- Arrhythmias complicate some hydrocarbon ingestion and/or inhalation and electrocardiographic evidence of
myocardial injury has been reported; intravenous lines and cardiac monitors should be established in
obviously symptomatic patients. The lungs excrete inhaled solvents, so that hyperventilation improves
clearance.
- A chest x-ray should be taken immediately after stabilisation of breathing and circulation to document
aspiration and detect the presence of pneumothorax.
Section 5 - FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA
?- Foam.
- Dry chemical powder.
- BCF (where regulations permit).
- Carbon dioxide.
FIRE FIGHTING
?- Alert Fire Brigade and tell them location and nature of hazard.
- May be violently or explosively reactive.
- Wear breathing apparatus plus protective gloves.
- Prevent, by any means available, spillage from entering drains or water course.
When any large container (including road and rail tankers) is involved in a fire,
consider evacuation by 500 metres in all directions.
FIRE/EXPLOSION HAZARD
?- Liquid and vapour are highly flammable.
- Severe fire hazard when exposed to heat, flame and/or oxidisers.
- Vapour may travel a considerable distance to source of ignition.
- Heating may cause expansion or decomposition leading to violent rupture of containers.
Combustion products include: carbon dioxide (CO2), hydrogen chloride, phosgene, other pyrolysis products
typical of burning organic material.
FIRE INCOMPATIBILITY
?- Avoid contamination with oxidising agents i.e. nitrates, oxidising acids, chlorine bleaches, pool
chlorine etc. as ignition may result.
HAZCHEM: 3YE
continued...
ALL-RUBBER KONTACT AR101
Chemwatch Material Safety Data Sheet
Issue Date: 19-Dec-2008 CHEMWATCH 18-6176
C9317EC Version No:2.0
CD 2008/4 Page 3 of 8
Section 6 - ACCIDENTAL RELEASE MEASURES
EMERGENCY PROCEDURES
MINOR SPILLS
?- Remove all ignition sources.
- Clean up all spills immediately.
- Avoid breathing vapours and contact with skin and eyes.
- Control personal contact by using protective equipment.
MAJOR SPILLS
?- Clear area of personnel and move upwind.
- Alert Fire Brigade and tell them location and nature of hazard.
- May be violently or explosively reactive.
- Wear breathing apparatus plus protective gloves.
Personal Protective Equipment advice is contained in Section 8 of the MSDS.
Section 7 - HANDLING AND STORAGE
PROCEDURE FOR HANDLING
?- Avoid all personal contact, including inhalation.
- Wear protective clothing when risk of exposure occurs.
- Use in a well-ventilated area.
- Prevent concentration in hollows and sumps.
- DO NOT allow clothing wet with material to stay in contact with skin.
SUITABLE CONTAINER
?- Packing as supplied by manufacturer.
- Plastic containers may only be used if approved for flammable liquid.
- Check that containers are clearly labelled and free from leaks.
STORAGE INCOMPATIBILITY
?- Avoid reaction with oxidising agents.
STORAGE REQUIREMENTS
?- Store in original containers in approved flame-proof area.
- No smoking, naked lights, heat or ignition sources.
- DO NOT store in pits, depressions, basements or areas where vapours may be trapped.
- Keep containers securely sealed.
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
EXPOSURE CONTROLS
Source Material TWA ppm TWA mg/m? STEL ppm STEL mg/m?br>
___________ ___________ _______ _______ _______ _______
Australia Exposure ethyl acetate (Ethyl 200 720 400 1440
Standards acetate)
Australia Exposure n- hexane (Hexane (n- 20 72
Standards Hexane))
Australia Exposure xylene (Xylene (o- , m- , 80 350 150 655
Standards p- isomers))
The following materials had no OELs on our records
?naphtha petroleum, light aliphatic solvent: CAS:64742- 89- 8
?1, 2, 4- trimethyl benzene: CAS:95- 63- 6
PERSONAL PROTECTION
RESPIRATOR
Type AXNO-P Filter of sufficient capacity
EYE
?- Safety glasses with side shields; or as required,
- Chemical goggles.
- Contact lenses may pose a special hazard; soft contact lenses may absorb and concentrate irritants. A
written policy document, describing the wearing of lens or restrictions on use, should be created for each
workplace or task. This should include a review of lens absorption and adsorption for the class of chemicals
in use and an account of injury experience. Medical and first-aid personnel should be trained in their
removal and suitable equipment should be readily available. In the event of chemical exposure, begin eye
continued...
ALL-RUBBER KONTACT AR101
Chemwatch Material Safety Data Sheet
Issue Date: 19-Dec-2008 CHEMWATCH 18-6176
C9317EC Version No:2.0
CD 2008/4 Page 4 of 8
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
irrigation immediately and remove contact lens as soon as practicable. Lens should be removed at the first
signs of eye redness or irritation - lens should be removed in a clean environment only after workers have
washed hands thoroughly. [CDC NIOSH Current Intelligence Bulletin 59].
HANDS/FEET
?- Wear chemical protective gloves, eg. PVC.
- Wear safety footwear or safety gumboots, eg. Rubber.
OTHER
?- Overalls.
- PVC Apron.
- PVC protective suit may be required if exposure severe.
- Eyewash unit.
ENGINEERING CONTROLS
?For flammable liquids and flammable gases, local exhaust ventilation or a process enclosure ventilation
system may be required. Ventilation equipment should be explosion-resistant.
Air contaminants generated in the workplace possess varying "escape" velocities which, in turn, determine
the "capture velocities" of fresh circulating air required to effectively remove the contaminant.
Type of Contaminant: Air Speed:
solvent, vapours, degreasing etc., evaporating 0.25- 0.5 m/s (50- 100 f/min.)
from tank (in still air).
aerosols, fumes from pouring operations, 0.5- 1 m/s (100- 200 f/min.)
intermittent container filling, low speed
conveyer transfers, welding, spray drift,
plating acid fumes, pickling (released at low
velocity into zone of active generation)
direct spray, spray painting in shallow booths, 1- 2.5 m/s (200- 500 f/min.)
drum filling, conveyer loading, crusher dusts,
gas discharge (active generation into zone of
rapid air motion)
.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE
Grey viscous highly flammable liquid with solvent odour; does not mix with
water.
PHYSICAL PROPERTIES
Liquid.
Does not mix with water.
Molecular Weight: Not Applicable Boiling Range (?77- 111
C):
Melting Range (?Not Applicable
C): Specific Gravity (water=1): 1.0
Solubility in water (g/L): Immiscible pH (as supplied): Not Applicable
pH (1% solution): Not Applicable Vapour Pressure (kPa): Not Available
Volatile Component (%vol): >70 Evaporation Rate: Fast
Relative Vapour Density (air=1): Not Available Flash Point (?<23
C):
Lower Explosive Limit (%): Not Available Upper Explosive Limit (%): Not Available
Autoignition Temp (?Not Available
C): Decomposition Temp (?Not Available
C):
State: Liquid Viscosity: Not Available
Section 10 - CHEMICAL STABILITY AND REACTIVITY INFORMATION
CONDITIONS CONTRIBUTING TO INSTABILITY
?- Presence of incompatible materials.
- Product is considered stable.
- Hazardous polymerisation will not occur.
For incompatible materials - refer to Section 7 - Handling and Storage.
Section 11 - TOXICOLOGICAL INFORMATION
POTENTIAL HEALTH EFFECTS
ACUTE HEALTH EFFECTS CHRONIC HEALTH EFFECTS
?Harmful by inhalation. ?Possible risk of impaired fertility.
?HARMFUL- May cause lung damage if ?Possible risk of harm to the unborn child.
swallowed.
?Irritating to eyes and skin. ?Harmful: danger of serious damage to health by
continued...
ALL-RUBBER KONTACT AR101
Chemwatch Material Safety Data Sheet
Issue Date: 19-Dec-2008 CHEMWATCH 18-6176
C9317EC Version No:2.0
CD 2008/4 Page 5 of 8
Section 11 - TOXICOLOGICAL INFORMATION
prolonged exposure through inhalation.
?Vapours may cause dizziness or
suffocation.
?Vapours may cause drowsiness and
dizziness.
TOXICITY AND IRRITATION
?Not available. Refer to individual constituents.
ETHYL ACETATE:
?unless otherwise specified data extracted from RTECS - Register of Toxic Effects of Chemical Substances.
TOXICITY IRRITATION
Oral (rat) LD50: 5620 mg/kg Eye (human): 400 ppm
Inhalation (rat) LC50: 1600 ppm/8h
Inhalation (human) TCLo: 400 ppm
Inhalation (Human) TCLo: 400 ppm/4h
Oral (Mouse) LD50: 4100 mg/kg
Intraperitoneal (Mouse) LD50: 709 mg/kg
Oral (Rabbit) LD50: 4935 mg/kg
Oral (Guinea) pig: LD50 5500 mg/kg
NAPHTHA PETROLEUM, LIGHT ALIPHATIC SOLVENT:
?unless otherwise specified data extracted from RTECS - Register of Toxic Effects of Chemical Substances.
?Lifetime exposure of rodents to gasoline produces carcinogenicity although the relevance to humans has been questioned.
Gasoline induces kidney cancer in male rats as a consequence of accumulation of the alpha2-microglobulin protein in hyaline
droplets in the male (but not female) rat kidney.
1,2,4-TRIMETHYL BENZENE:
?unless otherwise specified data extracted from RTECS - Register of Toxic Effects of Chemical Substances.
TOXICITY IRRITATION
Inhalation (rat) LC50: 18000 mg/m?4h Nil Reported
?Asthma-like symptoms may continue for months or even years after exposure to the material ceases. This may be due to a non-
allergenic condition known as reactive airways dysfunction syndrome (RADS) which can occur following exposure to high levels of
highly irritating compound.
For trimethylbenzenes:
Absorption of 1,2,4-trimethylbenzene occurs after oral, inhalation, or dermal exposure. Occupationally, inhalation and dermal
exposures are the most important routes of absorption although systemic intoxication from dermal absorption is not likely to
occur due to the dermal irritation caused by the chemical prompting quick removal. Following oral administration of the chemical
to rats, 62.6% of the dose was recovered as urinary metabolites indicating substantial absorption . 1,2,4-Trimethylbenzene is
lipophilic and may accumulate in fat and fatty tissues. In the blood stream, approximately 85% of the chemical is bound to red
blood cells Metabolism occurs by side-chain oxidation to form alcohols and carboxylic acids which are then conjugated with
glucuronic acid, glycine, or sulfates for urinary excretion . After a single oral dose to rats of 1200 mg/kg, urinary metabolites
consisted of approximately 43.2% glycine, 6.6% glucuronic, and 12.9% sulfuric acid conjugates . The two principle metabolites
excreted by rabbits after oral administration of 438 mg/kg/day for 5 days were 2,4-dimethylbenzoic acid and 3,4-dimethylhippuric
acid . The major routes of excretion of 1,2,4-trimethyl- benzene are exhalation of parent compound and elimination of urinary
metabolites. Half-times for urinary metabolites were reported as 9.5 hours for glycine, 22.9 hours for glucuronide, and 37.6
hours for sulfuric acid conjugates.
Acute Toxicity Direct contact with liquid 1,2,4-trimethylbenzene is irritating to the skin and breathing the vapor is irritating
to the respiratory tract causing pneumonitis. Breathing high concentrations of the chemical vapor causes headache, fatigue, and
drowsiness. In humans liquid 1,2,4-trimethylbenzene is irritating to the skin and inhalation of vapor causes chemical pneumonitis
. High concentrations of vapor (5000-9000 ppm) cause headache, fatigue, and drowsiness . The concentration of 5000 ppm is roughly
equivalent to a total of 221 mg/kg assuming a 30 minute exposure period (see end note 1). 2. Animals - Mice exposed to 8130-9140
ppm 1,2,4-trimethylbenzene (no duration given) had loss of righting response and loss of reflexes Direct dermal contact with the
chemical (no species given) causes vasodilation, erythema, and irritation (U.S. EPA ). Seven of 10 rats died after an oral dose
of 2.5 mL of a mixture of trimethylbenzenes in olive oil (average dose approximately 4.4 g/kg) . Rats and mice were exposed by
inhalation to a coal tar distillate containing about 70% 1,3,5- and 1,2,4-trimethylbenzene; no pathological changes were noted in
either species after exposure to 1800-2000 ppm for up to 48 continuous hours, or in rats after 14 exposures of 8 hours each at
the same exposure levels . No effects were reported for rats exposed to a mixture of trimethyl- benzenes at 1700 ppm for 10 to 21
days
Neurotoxicity 1,2,4-Trimethylbenzene depresses the central nervous system. Exposure to solvent mixtures containing the chemical
causes headache, fatigue, nervousness, and drowsiness. Occupationally, workers exposed to a solvent containing 50% 1,2,4-
trimethylbenzene had nervousness, headaches, drowsiness, and vertigo (U.S. EPA). Headache, fatigue, and drowsiness were reported
for workers exposed (no dose given) to paint thinner containing 80% 1,2,4- and 1,3,5-trimethylbenzenes
Results of the developmental toxicity study indicate that the C9 fraction caused adverse neurological effects at the highest dose
(1500 ppm) tested.
Subchronic/Chronic Toxicity Long-term exposure to solvents containing 1,2,4-trimethylbenzene may cause nervousness, tension, and
bronchitis. Painters that worked for several years with a solvent containing 50% 1,2,4- and 30% 1,3,5-trimethylbenzene showed
nervousness, tension and anxiety, asthmatic bronchitis, anemia, and alterations in blood clotting; haematological effects may
have been due to trace amounts of benzene
Rats given 1,2,4-trimethylbenzene orally at doses of 0.5 or 2.0 g/kg/day, 5 days/week for 4 weeks. All rats exposed to the high
dose died and 1 rat in the low dose died (no times given); no other effects were reported. Rats exposed by inhalation to 1700 ppm
of a trimethylbenzene isomeric mixture for 4 months had decreased weight gain, lymphopenia and neutrophilia .
Genotoxicity: Results of mutagenicity testing, indicate that the C9 fraction does not induce gene mutations in prokaryotes
(Salmonella tymphimurium/mammalian microsome assay); or in mammalian cells in culture (in Chinese hamster ovary cells with and
without activation). The C9 fraction does not does not induce chromosome mutations in Chinese hamster ovary cells with and
without activation; does not induce chromosome aberrations in the bone marrow of Sprague-Dawley rats exposed by inhalation (6
hours/day for 5 days); and does not induce sister chromatid exchange in Chinese hamster ovary cells with and without activation.
Developmental/Reproductive Toxicity: A three-generation reproductive study on the C9 fraction was conducted CD rats
(30/sex/group) were exposed by inhalation to the C9 fraction at concentrations of 0, 100, 500, or 1500 ppm (0, 100, 500, or 1500
continued...
ALL-RUBBER KONTACT AR101
Chemwatch Material Safety Data Sheet
Issue Date: 19-Dec-2008 CHEMWATCH 18-6176
C9317EC Version No:2.0
CD 2008/4 Page 6 of 8
Section 11 - TOXICOLOGICAL INFORMATION
mg/kg/day) for 6 hours/day, 5 days/week. There was evidence of parental and reproductive toxicity at all dose levels. Indicators
of parental toxicity included reduced body weights, increased salivation, hunched posture, aggressive behavior, and death.
Indicators of adverse reproductive system effects included reduced litter size and reduced pup body weight. The LOEL was 100 ppm;
a no-observed-effect level was not established Developmental toxicity, including possible develop- mental neurotoxicity, was
evident in rats in a 3-generation reproductive study
No effects on fecundity or fertility occurred in rats treated dermally with up to 0.3 mL/rat/day of a mixture of trimethyl-
benzenes, 4-6 hours/day, 5 days/week over one generation.
Other Toxicity data is available for
CHEMWATCH 12172 1,2,3-trimethylbenzene
CHEMWATCH2325 1,3,5-trimethylbenzene
N-HEXANE:
?unless otherwise specified data extracted from RTECS - Register of Toxic Effects of Chemical Substances.
TOXICITY IRRITATION
Oral (rat) LD50: 28710 mg/kg Eye(rabbit): 10 mg - Mild
Inhalation (human) TCLo: 190 ppm/8W
Inhalation (rat) LD50: 48000 ppm/4h
?The material may be irritating to the eye, with prolonged contact causing inflammation. Repeated or prolonged exposure to
irritants may produce conjunctivitis.
XYLENE:
?unless otherwise specified data extracted from RTECS - Register of Toxic Effects of Chemical Substances.
TOXICITY IRRITATION
Oral (human) LDLo: 50 mg/kg Skin (rabbit):500 mg/24h Moderate
Oral (rat) LD50: 4300 mg/kg Eye (human): 200 ppm Irritant
Inhalation (human) TCLo: 200 ppm Eye (rabbit): 87 mg Mild
Inhalation (man) LCLo: 10000 ppm/6h Eye (rabbit): 5 mg/24h SEVERE
Inhalation (rat) LC50: 5000 ppm/4h
Oral (Human) LD: 50 mg/kg
Inhalation (Human) TCLo: 200 ppm/4h
Intraperitoneal (Rat) LD50: 2459 mg/kg
Subcutaneous (Rat) LD50: 1700 mg/kg
Oral (Mouse) LD50: 2119 mg/kg
Intraperitoneal (Mouse) LD50: 1548 mg/kg
Intravenous (Rabbit) LD: 129 mg/kg
Inhalation (Guinea) pig: LC 450 ppm/4h
?The material may produce severe irritation to the eye causing pronounced inflammation. Repeated or prolonged exposure to
irritants may produce conjunctivitis.
The material may cause skin irritation after prolonged or repeated exposure and may produce a contact dermatitis (nonallergic).
This form of dermatitis is often characterised by skin redness (erythema) and swelling the epidermis.
The substance is classified by IARC as Group 3:
NOT classifiable as to its carcinogenicity to humans.
Evidence of carcinogenicity may be inadequate or limited in animal testing.
Reproductive effector in rats
CARCINOGEN
naphtha petroleum, International Agency Group 3
light aliphatic solvent for Research on Cancer
(IARC) Carcinogens
xylene International Agency Group 3
for Research on Cancer
(IARC) Carcinogens
REPROTOXIN
xylene ILO Chemicals in the electronics industry Reduced fertility or
that have toxic effects on reproduction sterility
Section 12 - ECOLOGICAL INFORMATION
Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
This material and its container must be disposed of as hazardous waste.
Section 13 - DISPOSAL CONSIDERATIONS
?- Containers may still present a chemical hazard/ danger when empty.
- Return to supplier for reuse/ recycling if possible.
Otherwise:
- If container can not be cleaned sufficiently well to ensure that residuals do not remain or if the
container cannot be used to store the same product, then puncture containers, to prevent re-use, and bury at
an authorised landfill.
- Where possible retain label warnings and MSDS and observe all notices pertaining to the product.
continued...
ALL-RUBBER KONTACT AR101
Chemwatch Material Safety Data Sheet
Issue Date: 19-Dec-2008 CHEMWATCH 18-6176
C9317EC Version No:2.0
CD 2008/4 Page 7 of 8
Section 14 - TRANSPORTATION INFORMATION
Labels Required: FLAMMABLE LIQUID
HAZCHEM: 3YE (ADG7)
UNDG:
Dangerous Goods Class: 3 Subrisk: None
UN Number: 1133 Packing Group: II
Shipping Name:ADHESIVES containing flammable liquid
Air Transport IATA:
ICAO/IATA Class: 3 ICAO/IATA Subrisk: None
UN/ID Number: 1133 Packing Group: II
Special provisions: A3
Shipping Name: ADHESIVES CONTAINING FLAMMABLE LIQUID
Maritime Transport IMDG:
IMDG Class: 3 IMDG Subrisk: None
UN Number: 1133 Packing Group: II
EMS Number: F- E, S- D Special provisions: 944
Limited Quantities: 5L Marine Pollutant: Not Determined
Shipping Name: ADHESIVES containing flammable liquid
Section 15 - REGULATORY INFORMATION
POISONS SCHEDULE: S5
REGULATIONS
All-Rubber Kontact AR101 (CAS: None):
No regulations applicable
ethyl acetate (CAS: 141-78-6) is found on the following regulatory lists;
Australia Exposure Standards
Australia Hazardous Substances
Australia High Volume Industrial Chemical List (HVICL)
Australia Inventory of Chemical Substances (AICS)
Australia National Pollutant Inventory
GESAMP/EHS Composite List of Hazard Profiles - Hazard evaluation of substances transported by ships
IMO IBC Code Chapter 17: Summary of minimum requirements
IMO MARPOL 73/78 (Annex II) - List of Noxious Liquid Substances Carried in Bulk
International Council of Chemical Associations (ICCA) - High Production Volume List
OECD Representative List of High Production Volume (HPV) Chemicals
naphtha petroleum, light aliphatic solvent (CAS: 64742-89-8) is found on the following regulatory lists;
Australia Hazardous Substances
Australia High Volume Industrial Chemical List (HVICL)
Australia Inventory of Chemical Substances (AICS)
Australia Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP) - Schedule 5
International Agency for Research on Cancer (IARC) Carcinogens
International Air Transport Association (IATA) Dangerous Goods Regulations
International Air Transport Association (IATA) Dangerous Goods Regulations - Prohibited List
International Council of Chemical Associations (ICCA) - High Production Volume List
OECD Representative List of High Production Volume (HPV) Chemicals
OSPAR List of Chemicals for Priority Action
1,2,4-trimethyl benzene (CAS: 95-63-6) is found on the following regulatory lists;
Australia Hazardous Substances
Australia Inventory of Chemical Substances (AICS)
GESAMP/EHS Composite List of Hazard Profiles - Hazard evaluation of substances transported by ships
IMO IBC Code Chapter 17: Summary of minimum requirements
IMO MARPOL 73/78 (Annex II) - List of Noxious Liquid Substances Carried in Bulk
IMO Provisional Categorization of Liquid Substances - List 1: Pure or technically pure products
IMO Provisional Categorization of Liquid Substances - List 2: Pollutant only mixtures containing at least
99% by weight of components already assessed by IMO
International Council of Chemical Associations (ICCA) - High Production Volume List
OECD Representative List of High Production Volume (HPV) Chemicals
n-hexane (CAS: 110-54-3) is found on the following regulatory lists;
Australia Exposure Standards
Australia Hazardous Substances
Australia High Volume Industrial Chemical List (HVICL)
Australia Inventory of Chemical Substances (AICS)
Australia National Pollutant Inventory
Australia Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP) - Schedule 5
GESAMP/EHS Composite List of Hazard Profiles - Hazard evaluation of substances transported by ships
continued...
ALL-RUBBER KONTACT AR101
Chemwatch Material Safety Data Sheet
Issue Date: 19-Dec-2008 CHEMWATCH 18-6176
C9317EC Version No:2.0
CD 2008/4 Page 8 of 8
Section 15 - REGULATORY INFORMATION
IMO IBC Code Chapter 17: Summary of minimum requirements
IMO MARPOL 73/78 (Annex II) - List of Other Liquid Substances
IMO Provisional Categorization of Liquid Substances - List 2: Pollutant only mixtures containing at least
99% by weight of components already assessed by IMO
International Council of Chemical Associations (ICCA) - High Production Volume List
OECD Representative List of High Production Volume (HPV) Chemicals
xylene (CAS: 1330-20-7) is found on the following regulatory lists;
Australia - Australian Capital Territory - Environment Protection Regulation: Ambient environmental
standards (Domestic water supply - organic compounds)
Australia - Australian Capital Territory Environment Protection Regulation Pollutants entering waterways -
Domestic water quality
Australia Exposure Standards
Australia Hazardous Substances
Australia High Volume Industrial Chemical List (HVICL)
Australia Inventory of Chemical Substances (AICS)
Australia National Pollutant Inventory
Australia Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP) - Appendix E (Part 2)
Australia Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP) - Appendix F (Part 3)
Australia Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP) - Appendix I
Australia Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP) - Schedule 5
Australia Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP) - Schedule 6
GESAMP/EHS Composite List of Hazard Profiles - Hazard evaluation of substances transported by ships
IMO IBC Code Chapter 17: Summary of minimum requirements
IMO MARPOL 73/78 (Annex II) - List of Noxious Liquid Substances Carried in Bulk
IMO Provisional Categorization of Liquid Substances - List 1: Pure or technically pure products
International Agency for Research on Cancer (IARC) Carcinogens
International Council of Chemical Associations (ICCA) - High Production Volume List
OECD Representative List of High Production Volume (HPV) Chemicals
WHO Guidelines for Drinking-water Quality - Guideline values for chemicals that are of health
significance in drinking-water
Section 16 - OTHER INFORMATION
?Classification of the preparation and its individual components has drawn on official and authoritative
sources as well as independent review by the Chemwatch Classification committee using available literature
references.
A list of reference resources used to assist the committee may be found at:
www.chemwatch.net/references.
?The (M)SDS is a Hazard Communication tool and should be used to assist in the Risk Assessment. Many factors
determine whether the reported Hazards are Risks in the workplace or other settings.
This document is copyright. Apart from any fair dealing for the purposes of private study, research, review or
criticism, as permitted under the Copyright Act, no part may be reproduced by any process without written
permission from CHEMWATCH. TEL (+61 3) 9572 4700.
Issue Date: 19-Dec-2008
Print Date: 19-Dec-2008
This is the end of the MSDS.
|