Razer Industries Pty Limited
SAFETY DATA SHEET (91/155/EWG)
Adhesion Improver SH Version: 005
Date of issue: November 2003 Page 1 of 6
Edited on: November 30, 2006
1. Material/Compound and company's description
Details on the product
Trade name Adhesion Improver SH
Details on the company/supplier
NILOS Hans Ziller GmbH & Co. KG, Reisholzstr. 15, D - 40721 Hilden
Phone: + 49 (0) 2103/951-0
Fax: +49 (0) 2103/951-199
Contact in emergencies:
Phone: +49 (0) 2103/951-811
2. Composition/Details of components
Chemical characterization
Solution of anorganic fillers and rubber chemicals
Solids content: approx. 25%
Methylisobutylketon Xylene
Content: 30-60% 10-30%
CAS No: 108-10-1 1330-20-7
EINECS No: 203-550-1 215-535-7
3. Possible hazards
Hazard designation: highly Flammable Hazardous symbol: F, Xn
Information on special hazards:
R 11 Highly flammable
R 20/21 Hazardous to health when inhaled and in case of contact with skin.
R 36/37 Hazardous to eyes and respiratory organs.
Razer Industries Pty Limited
SAFETY DATA SHEET (91/155/EWG)
Adhesion Improver SH Version: 005
Date of issue: November 2003 Page 2 of 6
Edited on: November 30, 2006
4. First aid measures
General information
Get medical assistance if the person is not feeling well.
Remove clothing contaminated with the product.
After inhalation
Provide fresh air, provide artificial respiration if breathing ceases.
After skin contact
Wash with soap and water and rinse off thoroughly.
After eye contact
Flush with running water for several minutes while keeping the eyelids open, get medical
assistance.
After swallowing
Do not induce vomiting, get immediately medical assistance or call immediately for an
ambulance. Swallowing and vomiting, may cause aspiration of the lungs, which leads to
suffocation or to toxic pulmonaria edema.
At high concentrations of vapor it leads to unconsciousness.
5. Fire fighting measures
Suitable extinguishing agents: foam, spray water, water mist, CO2, sand or earth may be
used for little fires
Unsuitable extinguishing agents: water full jet
Special protective equipment: Wear self-contained breathing apparatus. An explosive
gas-air mixture can be formed.
Cool down containers at risk with a water spray.
Razer Industries Pty Limited
SAFETY DATA SHEET (91/155/EWG)
Adhesion Improver SH Version: 005
Date of issue: November 2003 Page 3 of 6
Edited on: November 30, 2006
6. Actions to take if released accidentally
Keep it away from ignition sources ?avoid sparks.
Personal protective measures
Wear protective equipment. Keep unprotected persons away.
Environmental protection action
Prevent it from getting into the drainage and sewage system or into the groundwater or into
the soil. If this is not possible, inform the relevant authorities.
Procedure for cleaning-up
Mop it with absorbent material (sand, universal binder) and put it into a sealed container.
Keep it away from ignition sources ?avoid sparks.
7. Handling and storage
Store in sealed containers.
Ensure that there is good ventilation/air extraction at the workplace.
Protect against ignition sources, heat and direct sunlight.
Take measures against electrostatic charge.
Follow the legal instructions and the technical guidelines (U.A. TRbF 20).
Razer Industries Pty Limited
SAFETY DATA SHEET (91/155/EWG)
Adhesion Improver SH Version: 005
Date of issue: November 2003 Page 4 of 6
Edited on: November 30, 2006
8. Limitation of exposure and personal protective equipment
Constitutes with limiting values to be monitored at the workplace:
Components CAS-No Norm
MAK 440 mg/m3
Xylene 1330-20-7
MAK 82 mg/m3
Methylisobutylketon 108-10-1
Technical measures:
Ensure a permanent safe maintaining of the limiting values at the workplace. Only use with
adequate ventilation. For some operations, local air extraction is necessary. At inadequate
ventilation or air extraction, deadly concentrations may occur.
Respiratory equipment:
Use filter/ gas mask. If respiratory equipment is required for certain work, use a CE
approved mask with filter for: organic vapors, type A. Adequate filter according to EN
141.A1-P2 type 672 (optical identification brown edge).
Eyes protection/ facial protection
Use safety protective glasses.
Personal protection
Chemical resistant safety shoes.
Skin protection
Use chemical resistant gloves classified under DIN EN 374 (protective gloves against
chemicals microorganisms). Acceptable gloves are manufactured of vitone, nitrile,
butadiene rubber or PVC such as for instance Ultranitrile 403.
The limitation of usage of the gloves is depending on the conditions of application. Respect
the indications of your supplier for gloves.
9. Physical and chemical properties
Form: liquid/ dispersion
Colour: grey
Smell: typical
Density: 0,95g/cm?br>
Flash point: 16癈
Viscosity: about 1200 mPas
Solubility in water: practically insoluble
Explosion limits: An explosive gas-air mixture can be formed.
Razer Industries Pty Limited
SAFETY DATA SHEET (91/155/EWG)
Adhesion Improver SH Version: 005
Date of issue: November 2003 Page 5 of 6
Edited on: November 30, 2006
10. Stability and reactivity
No decomposition when properly used.
Avoid heat, ignition sources and sparks.
11. Toxicological details
Inhalation: The vapors can easily accumulate in enclosed or poorly ventilated areas and
cause unconsciousness.
12. Ecological details
General notes:
Water hazard class I (self assessment) : slightly water hazardous. Prevent it from getting
into the ground water, bodies of water, the drainage or sewage system.
13. Information on disposal
Allow waste of solvents to dry out completely, send it to disposal together with waste rubber.
Collect remains of solvents, send them to a disposal company handling special forms of
waste.
Empty containers: allow them to dry out completely and scrap them while still open.
EAK refuse disposal key reference: 080406.
Razer Industries Pty Limited
SAFETY DATA SHEET (91/155/EWG)
Adhesion Improver SH Version: 005
Date of issue: November 2003 Page 6 of 6
Edited on: November 30, 2006
14. Details for transport
Land transport ADR/RID and GGVSE:
ADR/RID class: 3
Hazard label: 3
Packing group: II
UN number: 1133
Description of hazardous goods: Adhesives
Sea transport IMDG/GGVSea:
IMDG/GGVSea class: 3
Hazard label: 3
UN number: 1133
Packing group: II
EMS number: F-E,S-E
Marine pollutant: no
Correct technical name: Adhesives
Air transport ICAO/IATA:
ICAO/IATA class: 3
Hazard label: 3
UN/ID number: 1133
Packing group: II
Correct technical name: Adhesives
Razer Industries Pty Limited
SAFETY DATA SHEET (91/155/EWG)
Adhesion Improver SH Version: 005
Date of issue: November 2003 Page 7 of 6
Edited on: November 30, 2006
15. Regulations
Classification according to the Hazardous Material Ordinance (GefStoffV):
symbol F highly inflammable
R-clauses:
R 11 Inflammable
R 20/21 Hazardous to health when inhaled and in case of contact with skin.
R 36/37 Hazardous to eyes and respiratory organs
S-clauses:
S2 Keep out of reach of children.
S9 Keep recipient at a well-ventilated place.
S 25 Avoid contact with eyes
S 26 In case of contact with eyes, rinse with plenty of water and seek medical advice.
S 36/37 Wear suitable protective clothing and gloves when working.
S 51 Only use in good ventilated places.
S 60 This product and its tin have to be disposed as dangerous waste.
German regulations:
VbF: AI
TA air: class III
16. Other details
Note TRGS 903.
The product is intended for commercial use only.
The details given here are based on current knowledge and experience.
The Safety Data Sheet describes products in terms of their safety requirements. The details
are in no way intended to imply a warranty of performance of capabilities.
|