Material Safety Data Sheet
Product Name: Issue Date:
1 st May 2006
ELCO Tuff Coat PART A
Classified as non hazardous according to the criteria of Worksafe Australia
1. COMPANY DETAILS
Company: ELCO International Pty Ltd
Address: 1 / 17 Stennett Road
INGLEBURN NSW 2565
Australia
Telephone: +61 2 9605 3000
Facsimile: +61 2 9605 3222
Emergency telephone: 0412 383 241 / 0412 609 351
2. IDENTIFICATION
Product name: ELCO Tuff - Coat Part A
Product code: ELTCCG 7 ELTCCM 9 (part A)
Product use: Protective coating. Application by roller or brush
UN number: Unrestricted
DG class and subsidiary -
risk:
Packaging group: -
Hazchem code: -
2a. Ingredients
Chemical Name: CAS Number: Proportion
Water 7732-18-5 HIGH
proprietary
Acrylic dispersion HIGH
Glycol ether 107-98-2 LOW
Aromatic hydrocarbon 64742-95-6 LOW
Glycol ether 111-76-2 LOW
Proportion (% weight per weight):
VHIGH >60, HIGH 30-60, MED 10-29, LOW 1-9, VLOW <1
All the constituents of this material are listed on the Australian Inventory of Chemical Substances (AICS).
2b. Physical Data
Appearance: Milky liquid
Odour: slight.
The statements above are compiled from our field of production and according to the latest technological developments and
application techniques. Since application and working are beyond our control, no liability of the producer can be derived from
the contents of this information sheet. ELCO International Pty Ltd and associated group of compa nies shall not be
responsible for any damage or injury resulting from abnormal use of the material, from any failure to adhere or observe the
recommendations, or from any hazards inherent in the nature of the material. It is the users responsibility to ev aluate the
information contained herein and use this product safely and within the current laws and regulations.
Material Safety Data Sheet
TUFF COAT PART A MSDS 01.05.06
Material Safety Data Sheet
Product Name: Issue Date:
1 st May 2006
ELCO Tuff Coat PART A
Boiling point: to be announced
Vapour pressure: < 23 mbar as water
Vapour density (Air=1): >1
Solubility in water: soluble
Specific gravity: 1.04
Flash point: to be announced
Flammability limits: to be announced
Volatile organics (VOC): < 60 g/Ltr
3. HEALTH HAZARD DATA
3a. Health Effects
Acute- ingestion: Ingestion can result in nausea, vomiting and abdominal pain.
Acute- eye: Liquids and vapours may irritate the eyes.
Acute-skin: Liquids and vapours may irritate the skin.
Acute- inhalation: Vapours, aerosols and mists are irritants to the mucous membranes and
respiratory tract. May have narcotic effects.
Chronic: Prolonged or repeated skin contact may lead to allergic skin sensitisation,
skin defatting and dermatitis.
3b. First Aid
Eye: Irrigate immediately with water for at least 15 minutes, occasionally lifting
eyelids. Seek medical attention.
Skin: Promptly wash the contaminated skin with soap and water. Remove any
contaminated clothing. Do not re-use until it has been laundered. If
irritation should develop, get medical attention.
Ingestion: Give water. Do NOT induce vomiting. Do NOT give anything by mouth to
an unconscious person. Seek medical attention without delay.
Inhalation: Remove victim from exposure and keep warm. If not breathing administer
artificial respiration. If breathing is difficult, have qualified person
administer oxygen. Seek medical attention.
First aid facilities: Eye wash facilities, soap and water.
3c. Advice to Doctor
Advice to doctor: Treat symptomatically.
The statements above are compiled from our field of production and according to the latest technological developments and
application techniques. Since application and working are beyond our control, no liability of the producer can be derived from
the contents of this information sheet. ELCO International Pty Ltd and associated group of compa nies shall not be
responsible for any damage or injury resulting from abnormal use of the material, from any failure to adhere or observe the
recommendations, or from any hazards inherent in the nature of the material. It is the users responsibility to ev aluate the
information contained herein and use this product safely and within the current laws and regulations.
Material Safety Data Sheet
TUFF COAT PART A MSDS 01.05.06
Material Safety Data Sheet
Product Name: Issue Date:
1 st May 2006
ELCO Tuff Coat PART A
4. PRECAUTIONS FOR USE
4a. Exposure Standards
Exposure guidelines: None established by the National Occupational Health and Safety
Commission for this specific product. However the exposure standard fThe
exposure standard for the glycol ether is 100 ppm TWA. The exposure
standard for the aromatic hydrocarbon is 100ppm TWA.
Engineering controls: Ensure ventilation is adequate to maintain good air circulation. Keep
containers closed when not in use. Use with local exhaust ventilation or
while wearing an organic vapour respirator.
4b. Personal Protection
Respiratory protection: Use with local exhaust ventilation or while wearing organic vapour
respirator.
Skin protection: Wear clean, long-sleeved, body covering clothing and impervious
overshoes. Use neoprene or rubber gloves. Avoid skin contact.
Eye protection: Use safety glasses with side splash shields or goggles or full-face shield.
Hygiene: Always wash hands before eating, drinking, smoking or using the toilet.
4c. Flammability
Fire hazards: Non combustible liquid, however following evaporation of aqueous
component, residual material can burn if ignited. On burning may emit toxic
fumes including those of carbon and nitrogen oxides.
5. SAFE HANDLING INFORMATION
5a. Storage and Transport Information -
Storage: store between 5 and 40 C. Keep away from frost. Store away from
foodstuffs. Keep containers closed at all times.
Transport: Not classified as a Dangerous Good according to the Australian Code for
the Transport of Dangerous Goods by road or rail.
UN number: Unrestricted
DG class and
subsidiary risk: -
The statements above are compiled from our field of production and according to the latest technological developments and
application techniques. Since application and working are beyond our control, no liability of the producer can be derived from
the contents of this information sheet. ELCO International Pty Ltd and associated group of compa nies shall not be
responsible for any damage or injury resulting from abnormal use of the material, from any failure to adhere or observe the
recommendations, or from any hazards inherent in the nature of the material. It is the users responsibility to ev aluate the
information contained herein and use this product safely and within the current laws and regulations.
Material Safety Data Sheet
TUFF COAT PART A MSDS 01.05.06
Material Safety Data Sheet
Product Name: Issue Date:
1 st May 2006
ELCO Tuff Coat PART A
Packaging group: -
Hazchem code: -
Poisons schedule: N/A
Shipping name: Water based Paint
5b. Environmental and Disposal Information
Spills and leaks: Spills should be contained to prevent contamination of drainage systems or
waterways. Collect with absorbent material such as earth, sawdust or
vermiculite. Place into suitable containers for disposal. Advise emergency
authorities if contamination of sewers or waterways occurs. Avoid eye or
skin contact, or oral ingestion.
Disposal method: Landfill or incinerate in accordance with all State and/or Local Government
regulations.
5c. Fire and Explosion Data
Fire & explosion hazard: Combustible Liquid. Thermal oxidation or pyrolysis (as in fire) of solid
residue may yield carbon dioxide, carbon monoxide and volatile fragments
which are flammable, irritating or toxic.
Fight fires from upwind and cool intact containers with water spray or
stream at maximum range.
Extinguishing media: Water fog, carbon dioxide, foam, dry chemical, sand.
Fire fighting equipment: Under fire conditions, product generates irritating and hazardous vapours
and toxic fumes. Fire fighters should wear self-contained breathing
apparatus in addition to the protective clothing usually worn.
Hazardous reactions:
Stability: [Conditions to avoid]
Product is stable.
[Specific materials to avoid]
Avoid exposure to strong alkalis, mineral acids and strong oxidisers.
Hazardous decomposition
Products: Thermal oxidation or pyrolysis (as in fire) may yield carbon dioxide, carbon
monoxide and volatile fragments which are flammable, irritating or toxic.
Hazardous polymerisation: Cannot occur.
6. ADDITIONAL INFORMATION
The statements above are compiled from our field of production and according to the latest technological developments and
application techniques. Since application and working are beyond our control, no liability of the producer can be derived from
the contents of this information sheet. ELCO International Pty Ltd and associated group of compa nies shall not be
responsible for any damage or injury resulting from abnormal use of the material, from any failure to adhere or observe the
recommendations, or from any hazards inherent in the nature of the material. It is the users responsibility to ev aluate the
information contained herein and use this product safely and within the current laws and regulations.
Material Safety Data Sheet
TUFF COAT PART A MSDS 01.05.06
Material Safety Data Sheet
Product Name: Issue Date:
1 st May 2006
ELCO Tuff Coat PART A
Toxicology: No LD50 available for product
For the glycol ether Oral LD50 (rat): 1480 mg/Kg, Dermal LD50 (rabbit):
490 mg/Kg, Inhalation LC50 (mouse): 700 ppm/7 hrs, SKIN (rat): LD50 490
mg/Kg
Environmental protection: Avoid contaminating waterways
Packaging and labelling
information:
7. CONTACT POINT
ELCO International Pty Ltd
Address: 1 / 17 Stennett Road
INGLEBURN NSW 2565
Australia
Telephone: +61 2 9605 3000
Emergency telephone (24 hr): 0412 383 240 / 0412 609 351
The statements above are compiled from our field of production and according to the latest technological developments and
application techniques. Since application and working are beyond our control, no liability of the producer can be derived from
the contents of this information sheet. ELCO International Pty Ltd and associated group of compa nies shall not be
responsible for any damage or injury resulting from abnormal use of the material, from any failure to adhere or observe the
recommendations, or from any hazards inherent in the nature of the material. It is the users responsibility to ev aluate the
information contained herein and use this product safely and within the current laws and regulations.
Material Safety Data Sheet
TUFF COAT PART A MSDS 01.05.06
|