Material Safety Data Sheet
Preparation Date: 30-Dec-2009 Revision Date: 29-Dec-2009 Revision Number: 0
1. PRODUCT AND COMPANY IDENTIFICATION
Product Code F151-1051A
Trade Name ELASTO-GRIP FC
Contact Manufacturer Tnemec Company, Inc. 6800 Corporate Drive, Kansas City, MO 64120-1372
Emergency Telephone Number 800-535-5053 (INFOTRAC) - TNEMEC REGULATORY DEPT: 816-474-3400
2. HAZARDS IDENTIFICATION
Emergency Overview
WARNING!
HARMFUL IF INHALED.
HARMFUL OR FATAL IF SWALLOWED.
MAY AFFECT THE BRAIN OR NERVOUS SYSTEM CAUSING DIZZINESS, HEADACHE OR NAUSEA.
MAY CAUSE EYE, SKIN, NOSE, THROAT AND RESPIRATORY TRACT IRRITATION.
MAY CAUSE ALLERGIC SKIN REACTION; EFFECTS MAY BE PERMANENT.
MAY BE HARMFUL IF ABSORBED THROUGH SKIN.
Potential Health Effects
Principle Routes of Exposure Eye contact, Inhalation, Skin contact.
Acute Effects
Eyes Irritating to eyes.
Skin Irritating to skin. May cause sensitization by skin contact.
Inhalation Irritating to respiratory system.
Ingestion May be harmful if swallowed.
Chronic Effects
NOTICE: Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous
system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal.
See Section 11 for additional Toxicological information.
Aggravated Medical Conditions Central nervous system. Skin disorders.
Interactions with Other Chemicals Use of alcoholic beverages may enhance toxic effects.
Potential Environmental Effects See Section 12 for additional Ecological information
Target Organ Effects Central nervous system, Eyes, Respiratory system, Skin
3. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous Components
CAS-No Weight %
Component
_____________________________________________________________________________________________
Page 1 / 6
F151-1051A - ELASTO-GRIP FC Revision Date: 29-Dec-2009
_____________________________________________________________________________________________
3. COMPOSITION/INFORMATION ON INGREDIENTS
10 - 30
EPOXY RESIN
107-98-2 2.5032
PROPYLENE GLYCOL MONOMETHYL
ETHER (SKIN)
124-17-4 1.2236
DIETHYLENE GLYCOL MONOBUTYL ETHER
ACETATE
100-51-6 1.0728
BENZYL ALCOHOL
4. FIRST AID MEASURES
Eye Contact Rinse thoroughly with plenty of water for at least 15 minutes.
Skin Contact Wash off immediately with soap and plenty of water.
Ingestion If swallowed, do not induce vomiting. Get medical attention immediately.
Inhalation Move to fresh air. Oxygen or artificial respiration if needed.
5. FIRE-FIGHTING MEASURES
Flammable Properties No information available
Suitable Extinguishing Media Use extinguishing measures that are appropriate to local circumstances and the surrounding
environment. Contact with water may cause violent frothing. Use: Carbon dioxide (CO2) -
Foam - Dry chemical
Hazardous Decomposition Products Oxides of carbon, hydrocarbons.
Specific Hazards Arising from the Chemical
Thermal decomposition can lead to release of irritating gases and vapours. In the event of fire and/or explosion do not breathe fumes.
Protective Equipment and Precautions for Firefighters
Use water spray to cool unopened containers. In the event of fire, wear self-contained breathing apparatus. Keep away from
heat/sparks/open flames/hot surfaces. May cause heat and pressure build-up in closed containers.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions Avoid contact with skin, eyes and clothing. Use personal protective equipment. Remove all
sources of ignition.
Environmental Precautions Prevent further leakage or spillage if safe to do so. Do not flush into surface water or sanitary
sewer system.
Methods for Cleaning Up If spilled, contain spilled material and remove with inert absorbent. Dispose of contaminated
absorbent, container and unused contents in accordance with local, state and federal
regulations.
Other Information Not applicable
7. HANDLING AND STORAGE
Handling
Close container after each use. Avoid contact with skin, eyes and clothing. Do not eat, drink or smoke when using this product. If
splashes are likely to occur, wear goggles. Wear protective gloves/clothing. Do not burn, or use a cutting torch on, the empty drum.
When used in a mixture, read the labels and safety data sheets of all components. Wash thoroughly after handling.
_____________________________________________________________________________________________
Page 2 / 6
F151-1051A - ELASTO-GRIP FC Revision Date: 29-Dec-2009
_____________________________________________________________________________________________
Storage
Prevent build-up of vapors by opening all windows and doors to achieve cross ventilation.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Guidelines
Component ACGIH TLV OSHA PEL Quebec TWAEV Ontario TWAEV Mexico OEL (TWA)
TWA: 100 ppm STEL: TWA: 360 mg/m3 TWA: TWA: 369 mg/m3 TWA: TWA: 100 ppm TWA:
PROPYLENE GLYCOL
365 mg/m3 STEL: 150
MONOMETHYL ETHER 150 ppm 100 ppm STEL: 150 100 ppm STEL: 150
ppm STEL: 540 mg/m3 ppm STEL: 553 mg/m3 ppm STEL: 550 mg/m3
(SKIN)
Engineering Measures Ensure adequate ventilation, especially in confined areas
Personal Protective Equipment
Skin Protection Lightweight protective clothing, Apron, Impervious gloves
Eye/face Protection If splashes are likely to occur, wear Goggles.
Respiratory Protection Use only with adequate ventilation. Do not breathe dust, vapors or spray mist. Ensure
fresh air entry during application and drying. If you experience eye watering, headache or
dizziness or if air monitoring demonstrates vapor/mist levels are above applicable limits,
wear an appropriate, properly fitted respirator (NIOSH approved) during and after application.
Follow respirator manufacturer's directions for respirator use.
General Hygiene Handle in accordance with good industrial hygiene and safety practice.
Considerations Avoid breathing dust created by cutting, sanding, or grinding.
9. PHYSICAL AND CHEMICAL PROPERTIES
Flash Point Not applicable
Boiling Point/Range 100 - 125癈 / 212.0 - 257.0癋
Upper Exposure Limits No information available
Lower Exposure Limits No information available
Evaporation Rate No information available
Vapour Pressure No information available
Vapour Density No information available
Specific Gravity 1.03613
Density 8.62217
VOC Content (lbs/gal) 1.505
% Volatile by Weight 79.2430
% Volatile by Volume 82.2755
10. STABILITY AND REACTIVITY
Chemical stability Stable. Conditions to Avoid Heat, flames and sparks.
Incompatible Products Strong oxidizing agents. Bases. Possibility of Hazardous None under normal processing
Acids. Alkalines. Reactions
11. TOXICOLOGICAL INFORMATION
Acute Toxicity
Component Information
Component LD50 Oral LD50 Dermal LC50 Inhalation
_____________________________________________________________________________________________
Page 3 / 6
F151-1051A - ELASTO-GRIP FC Revision Date: 29-Dec-2009
_____________________________________________________________________________________________
11. TOXICOLOGICAL INFORMATION
PROPYLENE GLYCOL 5200 mg/kg ( Rat ) 13000 mg/kg ( Rabbit ) 54.6 mg/L ( Rat ) 4 h 24 mg/L ( Rat )
MONOMETHYL ETHER (SKIN) 1h
DIETHYLENE GLYCOL 6500 mg/kg ( Rat ) 14500 mg/kg ( Rabbit ) 73.7 mg/L ( Rat ) 4 h
MONOBUTYL ETHER ACETATE
BENZYL ALCOHOL 1230 mg/kg ( Rat ) 2000 mg/kg ( Rabbit ) 8.8 mg/L ( Rat ) 4 h
Irritation No information available
Corrosivity No information available
Sensitization No information available
Chronic Toxicity
Carcinogenicity The table below indicates whether each agency has listed any ingredient as a carcinogen
Mutagenic Effects No information available
Reproductive Effects No information available
Developmental Effects No information available
Teratogenicity No information available
Target Organ Effects Central nervous system, Eyes, Respiratory system, Skin.
Endocrine Disruptor Information No information available
12. ECOLOGICAL INFORMATION
Ecotoxicity
.
Component Freshwater Algae Freshwater Fish Microtox Water Flea
PROPYLENE GLYCOL LC50= 19202 mg/L EC50 = 10457 mg/L 96 h
MONOMETHYL ETHER Oncorhynchus mykiss 96 h
(SKIN) LC50= 15886 mg/L
Pimephales promelas 96 h
LC50= 21742 mg/L Lepomis
macrochirus 96 h LC50 4600 -
10000 mg/L Leuciscus idus 96
h
DIETHYLENE GLYCOL LC50 50 - 70 mg/L EC50 = 665 mg/L 48 h
MONOBUTYL ETHER Brachydanio rerio 96 h LC50=
ACETATE 77 mg/L Pimephales promelas
96 h
BENZYL ALCOHOL EC50 = 35 mg/L 3 h LC50= 460 mg/L Pimephales EC50 = 63.7 mg/L 5 min EC50 EC50 = 23 mg/L 48 h
promelas 96 h LC50= 10 mg/L = 63.7 mg/L 15 min EC50 =
Lepomis macrochirus 96 h 71.4 mg/L 30 min EC50 = 50
mg/L 5 min
13. DISPOSAL CONSIDERATIONS
Waste Disposal Methods Keep container tightly closed. If spilled, contain spilled material and remove with inert
absorbent. Dispose of contaminated absorbent, container and unused contents in accordance
with local, state and federal regulations.
Contaminated Packaging Empty containers should be taken for local recycling, recovery or waste disposal
14. TRANSPORT INFORMATION
DOT Ground Transportation Only. Call TNEMEC Traffic Department - 816-474-3400 for other modes of Transportation.
Proper Shipping Name PAINT,WATER BASE FREEZABLE
_____________________________________________________________________________________________
Page 4 / 6
F151-1051A - ELASTO-GRIP FC Revision Date: 29-Dec-2009
_____________________________________________________________________________________________
15. REGULATORY INFORMATION
International Inventories
TSCA Complies
DSL/NDSL Complies
EINECS/ELINCS Does not Comply
CHINA Does not Comply
ENCS Does not Comply
KECL Does not Comply
PICCS Does not Comply
AICS Does not Comply
Clean Air Act, Section 112 Hazardous Air Pollutants (HAPs) (see 40 CFR 61)
This product contains the following HAPs:
Component
DIETHYLENE GLYCOL MONOBUTYL ETHER ACETATE
U.S. Federal Regulations
SARA 313
Component CAS-No Weight % SARA 313 - Threshold
Values
DIETHYLENE GLYCOL MONOBUTYL ETHER ACETATE 124-17-4 1.2236 1.0
SARA 311/312 Hazardous Categorization
Chronic Health Hazard No
Acute Health Hazard Yes
Fire Hazard Yes
Sudden Release of Pressure Hazard No
Reactive Hazard No
CERCLA
U.S. State Regulations
California Proposition 65
This product contains the following Proposition 65 chemicals:
State Right-to-Know
Component Massachusetts New Jersey Pennsylvania Illinois Rhode Island
PROPYLENE GLYCOL X X X X
MONOMETHYL ETHER
(SKIN)
DIETHYLENE GLYCOL X X X
MONOBUTYL ETHER
ACETATE
BENZYL ALCOHOL X X
Other International Regulations
Canada
_____________________________________________________________________________________________
Page 5 / 6
F151-1051A - ELASTO-GRIP FC Revision Date: 29-Dec-2009
_____________________________________________________________________________________________
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and
the MSDS contains all the information required by the CPR.
WHMIS Hazard Class
D2B Toxic materials
Legend
NPRI - National Pollutant Release Inventory
16. OTHER INFORMATION
Revision Date: 29-Dec-2009
Revision Summary No information available
HMIS Health 0 Flammability 0 Reactivity 1
Disclaimer
For specific information regarding occupational safety and health standards, please refer to the Code of Federal
Regulations, Title 29, Part 1910.
To the best of our knowledge, the information contained herein is accurate. However, neither the Tnemec Company or any
of its subsidiaries assume any liability whatsoever for the accuracy of completeness of the information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown
health hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that
these are the only hazards which exist.
End of MSDS
_____________________________________________________________________________________________
Page 6 / 6
Material Safety Data Sheet
Preparation Date: 30-Dec-2009 Revision Date: 29-Dec-2009 Revision Number: 0
1. PRODUCT AND COMPANY IDENTIFICATION
Product Code F151-1051B
Trade Name ELASTO-GRIP FC GREEN CONVERTER
Contact Manufacturer Tnemec Company, Inc. 6800 Corporate Drive, Kansas City, MO 64120-1372
Emergency Telephone Number 800-535-5053 (INFOTRAC) - TNEMEC REGULATORY DEPT: 816-474-3400
2. HAZARDS IDENTIFICATION
Emergency Overview
WARNING!
HARMFUL IF INHALED.
HARMFUL OR FATAL IF SWALLOWED.
MAY AFFECT THE BRAIN OR NERVOUS SYSTEM CAUSING DIZZINESS, HEADACHE OR NAUSEA.
MAY CAUSE EYE, SKIN, NOSE, THROAT AND RESPIRATORY TRACT IRRITATION.
MAY CAUSE ALLERGIC SKIN REACTION; EFFECTS MAY BE PERMANENT.
MAY BE HARMFUL IF ABSORBED THROUGH SKIN.
Potential Health Effects
Principle Routes of Exposure Eye contact, Inhalation, Skin contact.
Acute Effects
Eyes Irritating to eyes.
Skin Irritating to skin. May cause sensitization by skin contact.
Inhalation Irritating to respiratory system.
Ingestion May be harmful if swallowed.
Chronic Effects
NOTICE: Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous
system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal.
See Section 11 for additional Toxicological information.
Aggravated Medical Conditions No information available
Interactions with Other Chemicals No information available
Potential Environmental Effects See Section 12 for additional Ecological information
3. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous Components
CAS-No Weight %
Component
112-57-2 1-5
TETRAETHYLENEPENTAMINE
_____________________________________________________________________________________________
Page 1 / 6
F151-1051B - ELASTO-GRIP FC GREEN CONVERTER Revision Date: 29-Dec-2009
_____________________________________________________________________________________________
3. COMPOSITION/INFORMATION ON INGREDIENTS
124-17-4 1.7598
DIETHYLENE GLYCOL MONOBUTYL ETHER
ACETATE
90-72-2 0.1 - 1
MODIFIED ALIPHATIC AMINE
4. FIRST AID MEASURES
Eye Contact Rinse thoroughly with plenty of water for at least 15 minutes.
Skin Contact Wash off immediately with soap and plenty of water.
Ingestion If swallowed, do not induce vomiting. Get medical attention immediately.
Inhalation Move to fresh air. Oxygen or artificial respiration if needed.
5. FIRE-FIGHTING MEASURES
Flammable Properties No information available
Suitable Extinguishing Media Use extinguishing measures that are appropriate to local circumstances and the surrounding
environment. Contact with water may cause violent frothing. Use: Carbon dioxide (CO2) -
Foam - Dry chemical
Hazardous Decomposition Products Oxides of carbon, hydrocarbons. Oxides of nitrogen. Aldehydes.
Specific Hazards Arising from the Chemical
Thermal decomposition can lead to release of irritating gases and vapours. In the event of fire and/or explosion do not breathe fumes.
Protective Equipment and Precautions for Firefighters
Use water spray to cool unopened containers. In the event of fire, wear self-contained breathing apparatus. Keep away from
heat/sparks/open flames/hot surfaces. May cause heat and pressure build-up in closed containers.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions Avoid contact with skin, eyes and clothing. Use personal protective equipment. Remove all
sources of ignition.
Environmental Precautions Prevent further leakage or spillage if safe to do so. Do not flush into surface water or sanitary
sewer system.
Methods for Cleaning Up If spilled, contain spilled material and remove with inert absorbent. Dispose of contaminated
absorbent, container and unused contents in accordance with local, state and federal
regulations.
Other Information Not applicable
7. HANDLING AND STORAGE
Handling
Close container after each use. Avoid contact with skin, eyes and clothing. Do not eat, drink or smoke when using this product. If
splashes are likely to occur, wear goggles. Wear protective gloves/clothing. Do not burn, or use a cutting torch on, the empty drum.
When used in a mixture, read the labels and safety data sheets of all components. Wash thoroughly after handling.
Storage
Prevent build-up of vapors by opening all windows and doors to achieve cross ventilation.
_____________________________________________________________________________________________
Page 2 / 6
F151-1051B - ELASTO-GRIP FC GREEN CONVERTER Revision Date: 29-Dec-2009
_____________________________________________________________________________________________
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Guidelines
Engineering Measures Ensure adequate ventilation, especially in confined areas
Personal Protective Equipment
Skin Protection Lightweight protective clothing, Apron, Impervious gloves
Eye/face Protection If splashes are likely to occur, wear Goggles.
Respiratory Protection Use only with adequate ventilation. Do not breathe dust, vapors or spray mist. Ensure
fresh air entry during application and drying. If you experience eye watering, headache or
dizziness or if air monitoring demonstrates vapor/mist levels are above applicable limits,
wear an appropriate, properly fitted respirator (NIOSH approved) during and after application.
Follow respirator manufacturer's directions for respirator use.
General Hygiene Handle in accordance with good industrial hygiene and safety practice.
Considerations Avoid breathing dust created by cutting, sanding, or grinding.
9. PHYSICAL AND CHEMICAL PROPERTIES
Flash Point Not applicable
Boiling Point/Range 100 - 121癈 / 212.0 - 250.0癋
Upper Exposure Limits No information available
Lower Exposure Limits No information available
Evaporation Rate No information available
Vapour Pressure No information available
Vapour Density No information available
Specific Gravity 1.01152
Density 8.41737
VOC Content (lbs/gal) 1.188
% Volatile by Weight 85.1420
% Volatile by Volume 86.0443
10. STABILITY AND REACTIVITY
Chemical stability Stable. Conditions to Avoid Heat, flames and sparks. Epoxy
constituents.
Incompatible Products Strong oxidizing agents. Acids. Possibility of Hazardous None under normal processing
Alkalines. Cleaning solutions Reactions
such as Chromerge and Aqua
Regia.
11. TOXICOLOGICAL INFORMATION
Acute Toxicity
Component Information
Component LD50 Oral LD50 Dermal LC50 Inhalation
TETRAETHYLENEPENTAMINE 2100 mg/kg ( Rat ) 660 mg/kg ( Rabbit )
DIETHYLENE GLYCOL 6500 mg/kg ( Rat ) 14500 mg/kg ( Rabbit ) 73.7 mg/L ( Rat ) 4 h
MONOBUTYL ETHER ACETATE
MODIFIED ALIPHATIC AMINE 1000 mg/kg ( Rat ) 1280 mg/kg ( Rat )
Irritation No information available
_____________________________________________________________________________________________
Page 3 / 6
F151-1051B - ELASTO-GRIP FC GREEN CONVERTER Revision Date: 29-Dec-2009
_____________________________________________________________________________________________
Corrosivity No information available
Sensitization No information available
Chronic Toxicity
Carcinogenicity The table below indicates whether each agency has listed any ingredient as a carcinogen
Mutagenic Effects No information available
Reproductive Effects No information available
Developmental Effects No information available
Teratogenicity No information available
Target Organ Effects No information available
Endocrine Disruptor Information No information available
12. ECOLOGICAL INFORMATION
Ecotoxicity
.
Component Freshwater Algae Freshwater Fish Microtox Water Flea
TETRAETHYLENEPENTAMI EC50 = 2.1 mg/L 72 h LC50= 420 mg/L Poecilia EC50 = 24.1 mg/L 48 h
NE reticulata 96 h
DIETHYLENE GLYCOL LC50 50 - 70 mg/L EC50 = 665 mg/L 48 h
MONOBUTYL ETHER Brachydanio rerio 96 h LC50=
ACETATE 77 mg/L Pimephales promelas
96 h
13. DISPOSAL CONSIDERATIONS
Waste Disposal Methods Keep container tightly closed. If spilled, contain spilled material and remove with inert
absorbent. Dispose of contaminated absorbent, container and unused contents in accordance
with local, state and federal regulations.
Contaminated Packaging Empty containers should be taken for local recycling, recovery or waste disposal
14. TRANSPORT INFORMATION
DOT Ground Transportation Only. Call TNEMEC Traffic Department - 816-474-3400 for other modes of Transportation.
Proper Shipping Name PAINT,WATER BASE FREEZABLE
15. REGULATORY INFORMATION
International Inventories
TSCA Complies
DSL/NDSL Does not Comply
EINECS/ELINCS Does not Comply
CHINA Does not Comply
ENCS Does not Comply
KECL Does not Comply
PICCS Does not Comply
AICS Does not Comply
_____________________________________________________________________________________________
Page 4 / 6
F151-1051B - ELASTO-GRIP FC GREEN CONVERTER Revision Date: 29-Dec-2009
_____________________________________________________________________________________________
Clean Air Act, Section 112 Hazardous Air Pollutants (HAPs) (see 40 CFR 61)
This product contains the following HAPs:
Component
DIETHYLENE GLYCOL MONOBUTYL ETHER ACETATE
U.S. Federal Regulations
SARA 313
Component CAS-No Weight % SARA 313 - Threshold
Values
DIETHYLENE GLYCOL MONOBUTYL ETHER ACETATE 124-17-4 1.7598 1.0
SARA 311/312 Hazardous Categorization
Chronic Health Hazard No
Acute Health Hazard Yes
Fire Hazard Yes
Sudden Release of Pressure Hazard No
Reactive Hazard No
CERCLA
U.S. State Regulations
California Proposition 65
This product contains the following Proposition 65 chemicals:
State Right-to-Know
Component Massachusetts New Jersey Pennsylvania Illinois Rhode Island
TETRAETHYLENEPENTAMI X X X
NE
DIETHYLENE GLYCOL X X X
MONOBUTYL ETHER
ACETATE
Other International Regulations
Canada
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and
the MSDS contains all the information required by the CPR.
WHMIS Hazard Class
D2B Toxic materials
Legend
NPRI - National Pollutant Release Inventory
16. OTHER INFORMATION
Revision Date: 29-Dec-2009
Revision Summary No information available
_____________________________________________________________________________________________
Page 5 / 6
F151-1051B - ELASTO-GRIP FC GREEN CONVERTER Revision Date: 29-Dec-2009
_____________________________________________________________________________________________
HMIS Health 0 Flammability 0 Reactivity 1
Disclaimer
For specific information regarding occupational safety and health standards, please refer to the Code of Federal
Regulations, Title 29, Part 1910.
To the best of our knowledge, the information contained herein is accurate. However, neither the Tnemec Company or any
of its subsidiaries assume any liability whatsoever for the accuracy of completeness of the information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown
health hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that
these are the only hazards which exist.
End of MSDS
_____________________________________________________________________________________________
Page 6 / 6
|