Material Safety Data Sheet
Preparation Date: 30-Dec-2009 Revision Date: 29-Dec-2009 Revision Number: 0
1. PRODUCT AND COMPANY IDENTIFICATION
Product Code F218-0218A
Trade Name MORTARCLAD CLEAR
Contact Manufacturer Tnemec Company, Inc. 6800 Corporate Drive, Kansas City, MO 64120-1372
Emergency Telephone Number 800-535-5053 (INFOTRAC) - TNEMEC REGULATORY DEPT: 816-474-3400
2. HAZARDS IDENTIFICATION
Emergency Overview
WARNING!
HARMFUL IF INHALED.
HARMFUL OR FATAL IF SWALLOWED.
MAY AFFECT THE BRAIN OR NERVOUS SYSTEM CAUSING DIZZINESS, HEADACHE OR NAUSEA.
MAY CAUSE EYE, SKIN, NOSE, THROAT AND RESPIRATORY TRACT IRRITATION.
MAY CAUSE ALLERGIC SKIN REACTION; EFFECTS MAY BE PERMANENT.
Potential Health Effects
Principle Routes of Exposure Eye contact, Inhalation, Skin contact.
Acute Effects
Eyes Irritating to eyes.
Skin Irritating to skin. May cause sensitization by skin contact.
Inhalation Irritating to respiratory system.
Ingestion May be harmful if swallowed.
Chronic Effects
NOTICE: Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous
system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal.
See Section 11 for additional Toxicological information.
Aggravated Medical Conditions Central nervous system. Skin disorders.
Interactions with Other Chemicals Use of alcoholic beverages may enhance toxic effects.
Potential Environmental Effects See Section 12 for additional Ecological information
Target Organ Effects Central nervous system, Eyes, Respiratory system, Skin
3. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous Components
CAS-No Weight %
Component
30 - 60
EPOXY RESIN
_____________________________________________________________________________________________
Page 1 / 6
F218-0218A - MORTARCLAD CLEAR Revision Date: 29-Dec-2009
_____________________________________________________________________________________________
3. COMPOSITION/INFORMATION ON INGREDIENTS
107-98-2 4.4374
PROPYLENE GLYCOL MONOMETHYL
ETHER (SKIN)
100-51-6 1.9017
BENZYL ALCOHOL
4. FIRST AID MEASURES
Eye Contact Rinse thoroughly with plenty of water for at least 15 minutes.
Skin Contact Wash off immediately with soap and plenty of water.
Ingestion If swallowed, do not induce vomiting. Get medical attention immediately.
Inhalation Move to fresh air. Oxygen or artificial respiration if needed.
5. FIRE-FIGHTING MEASURES
Flammable Properties No information available.
Suitable Extinguishing Media Use extinguishing measures that are appropriate to local circumstances and the surrounding
environment. Contact with water may cause violent frothing. Use: Carbon dioxide (CO2) -
Foam - Dry chemical
Hazardous Decomposition Products Oxides of carbon, hydrocarbons. Oxides of nitrogen.
Specific Hazards Arising from the Chemical
Thermal decomposition can lead to release of irritating gases and vapours. In the event of fire and/or explosion do not breathe fumes.
Protective Equipment and Precautions for Firefighters
Use water spray to cool unopened containers. In the event of fire, wear self-contained breathing apparatus. Keep away from
heat/sparks/open flames/hot surfaces. May cause heat and pressure build-up in closed containers.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions Avoid contact with skin, eyes and clothing. Use personal protective equipment. Remove all
sources of ignition.
Environmental Precautions Prevent further leakage or spillage if safe to do so. Do not flush into surface water or sanitary
sewer system.
Methods for Cleaning Up If spilled, contain spilled material and remove with inert absorbent. Dispose of contaminated
absorbent, container and unused contents in accordance with local, state and federal
regulations.
Other Information Not applicable
7. HANDLING AND STORAGE
Handling
Close container after each use. Avoid contact with skin, eyes and clothing. Do not eat, drink or smoke when using this product. If
splashes are likely to occur, wear goggles. Wear protective gloves/clothing. Do not burn, or use a cutting torch on, the empty drum.
When used in a mixture, read the labels and safety data sheets of all components. Wash thoroughly after handling.
Storage
Prevent build-up of vapors by opening all windows and doors to achieve cross ventilation.
_____________________________________________________________________________________________
Page 2 / 6
F218-0218A - MORTARCLAD CLEAR Revision Date: 29-Dec-2009
_____________________________________________________________________________________________
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Guidelines
Component ACGIH TLV OSHA PEL Quebec TWAEV Ontario TWAEV Mexico OEL (TWA)
TWA: 100 ppm STEL: TWA: 360 mg/m3 TWA: TWA: 369 mg/m3 TWA: TWA: 100 ppm TWA:
PROPYLENE GLYCOL
365 mg/m3 STEL: 150
MONOMETHYL ETHER 150 ppm 100 ppm STEL: 150 100 ppm STEL: 150
ppm STEL: 540 mg/m3 ppm STEL: 553 mg/m3 ppm STEL: 550 mg/m3
(SKIN)
Engineering Measures Ensure adequate ventilation, especially in confined areas
Personal Protective Equipment
Skin Protection Lightweight protective clothing, Apron, Impervious gloves
Eye/face Protection If splashes are likely to occur, wear Goggles.
Respiratory Protection Use only with adequate ventilation. Do not breathe dust, vapors or spray mist. Ensure
fresh air entry during application and drying. If you experience eye watering, headache or
dizziness or if air monitoring demonstrates vapor/mist levels are above applicable limits,
wear an appropriate, properly fitted respirator (NIOSH approved) during and after application.
Follow respirator manufacturer's directions for respirator use.
General Hygiene Handle in accordance with good industrial hygiene and safety practice.
Considerations Avoid breathing dust created by cutting, sanding, or grinding.
9. PHYSICAL AND CHEMICAL PROPERTIES
Flash Point Not applicable
Method Pensky Martens - Closed Cup
Boiling Point/Range No information available
Upper Exposure Limits No information available
Lower Exposure Limits No information available
Evaporation Rate No information available
Vapour Pressure No information available
Vapour Density No information available
Specific Gravity 1.06176
Density 8.83547
VOC Content (lbs/gal) 1.139
% Volatile by Weight 64.0170
% Volatile by Volume 68.3183
10. STABILITY AND REACTIVITY
Chemical stability Stable. Conditions to Avoid Heat, flames and sparks.
Incompatible Products Strong oxidizing agents. Bases. Possibility of Hazardous None under normal processing
Acids. Reactions
11. TOXICOLOGICAL INFORMATION
Acute Toxicity
Component Information
Component LD50 Oral LD50 Dermal LC50 Inhalation
WATER 90 mL/kg ( Rat )
PROPYLENE GLYCOL 5200 mg/kg ( Rat ) 13000 mg/kg ( Rabbit ) 54.6 mg/L ( Rat ) 4 h 24 mg/L ( Rat )
MONOMETHYL ETHER (SKIN) 1h
_____________________________________________________________________________________________
Page 3 / 6
F218-0218A - MORTARCLAD CLEAR Revision Date: 29-Dec-2009
_____________________________________________________________________________________________
11. TOXICOLOGICAL INFORMATION
BENZYL ALCOHOL 1230 mg/kg ( Rat ) 2000 mg/kg ( Rabbit ) 8.8 mg/L ( Rat ) 4 h
Irritation No information available
Corrosivity No information available
Sensitization No information available
Chronic Toxicity
Carcinogenicity The table below indicates whether each agency has listed any ingredient as a carcinogen
Mutagenic Effects No information available
Reproductive Effects No information available
Developmental Effects No information available
Teratogenicity No information available
Target Organ Effects Central nervous system, Eyes, Respiratory system, Skin.
Endocrine Disruptor Information No information available
12. ECOLOGICAL INFORMATION
Ecotoxicity
.
Component Freshwater Algae Freshwater Fish Microtox Water Flea
PROPYLENE GLYCOL LC50= 19202 mg/L EC50 = 10457 mg/L 96 h
MONOMETHYL ETHER Oncorhynchus mykiss 96 h
(SKIN) LC50= 15886 mg/L
Pimephales promelas 96 h
LC50= 21742 mg/L Lepomis
macrochirus 96 h LC50 4600 -
10000 mg/L Leuciscus idus 96
h
BENZYL ALCOHOL EC50 = 35 mg/L 3 h LC50= 460 mg/L Pimephales EC50 = 63.7 mg/L 5 min EC50 EC50 = 23 mg/L 48 h
promelas 96 h LC50= 10 mg/L = 63.7 mg/L 15 min EC50 =
Lepomis macrochirus 96 h 71.4 mg/L 30 min EC50 = 50
mg/L 5 min
13. DISPOSAL CONSIDERATIONS
Waste Disposal Methods Keep container tightly closed. If spilled, contain spilled material and remove with inert
absorbent. Dispose of contaminated absorbent, container and unused contents in accordance
with local, state and federal regulations.
Contaminated Packaging Empty containers should be taken for local recycling, recovery or waste disposal
14. TRANSPORT INFORMATION
DOT Ground Transportation Only. Call TNEMEC Traffic Department - 816-474-3400 for other modes of Transportation.
Proper Shipping Name PAINT,WATER BASE FREEZABLE
15. REGULATORY INFORMATION
International Inventories
TSCA Complies
_____________________________________________________________________________________________
Page 4 / 6
F218-0218A - MORTARCLAD CLEAR Revision Date: 29-Dec-2009
_____________________________________________________________________________________________
DSL/NDSL Complies
EINECS/ELINCS Does not Comply
CHINA Does not Comply
ENCS Does not Comply
KECL Does not Comply
PICCS Does not Comply
AICS Does not Comply
U.S. Federal Regulations
SARA 313
SARA 311/312 Hazardous Categorization
Chronic Health Hazard No
Acute Health Hazard Yes
Fire Hazard Yes
Sudden Release of Pressure Hazard No
Reactive Hazard No
CERCLA
U.S. State Regulations
California Proposition 65
This product contains the following Proposition 65 chemicals:
State Right-to-Know
Component Massachusetts New Jersey Pennsylvania Illinois Rhode Island
PROPYLENE GLYCOL X X X X
MONOMETHYL ETHER
(SKIN)
BENZYL ALCOHOL X X
Other International Regulations
Canada
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and
the MSDS contains all the information required by the CPR.
WHMIS Hazard Class
D2B Toxic materials
Legend
NPRI - National Pollutant Release Inventory
16. OTHER INFORMATION
Revision Date: 29-Dec-2009
Revision Summary No information available
_____________________________________________________________________________________________
Page 5 / 6
F218-0218A - MORTARCLAD CLEAR Revision Date: 29-Dec-2009
_____________________________________________________________________________________________
HMIS Health 2 Flammability 1 Reactivity 1
Disclaimer
For specific information regarding occupational safety and health standards, please refer to the Code of Federal
Regulations, Title 29, Part 1910.
To the best of our knowledge, the information contained herein is accurate. However, neither the Tnemec Company or any
of its subsidiaries assume any liability whatsoever for the accuracy of completeness of the information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown
health hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that
these are the only hazards which exist.
End of MSDS
_____________________________________________________________________________________________
Page 6 / 6
Material Safety Data Sheet
Preparation Date: 30-Dec-2009 Revision Date: 29-Dec-2009 Revision Number: 0
1. PRODUCT AND COMPANY IDENTIFICATION
Product Code F218-0218B
Trade Name MORTARCLAD CLEAR
Contact Manufacturer Tnemec Company, Inc. 6800 Corporate Drive, Kansas City, MO 64120-1372
Emergency Telephone Number 800-535-5053 (INFOTRAC) - TNEMEC REGULATORY DEPT: 816-474-3400
2. HAZARDS IDENTIFICATION
Emergency Overview
WARNING!
HARMFUL IF INHALED.
CAUSES EYE BURNS.
MAY CAUSE ALLERGIC SKIN REACTION; EFFECTS MAY BE PERMANENT.
HARMFUL OR FATAL IF SWALLOWED.
Potential Health Effects
Principle Routes of Exposure Eye contact, Inhalation, Skin contact.
Acute Effects
Eyes Causes burns.
Skin Irritating to skin. May cause sensitization by skin contact.
Inhalation Irritating to respiratory system.
Ingestion May be harmful if swallowed.
Chronic Effects
Avoid repeated exposure
See Section 11 for additional Toxicological information.
Aggravated Medical Conditions Gastrointestinal tract. Skin disorders.
Interactions with Other Chemicals Use of alcoholic beverages may enhance toxic effects.
Potential Environmental Effects See Section 12 for additional Ecological information
Target Organ Effects Eyes, Skin, Gastrointestinal tract
3. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous Components
CAS-No Weight %
Component
30 - 60
POLYAMINE ADDUCT
_____________________________________________________________________________________________
Page 1 / 5
F218-0218B - MORTARCLAD CLEAR Revision Date: 29-Dec-2009
_____________________________________________________________________________________________
4. FIRST AID MEASURES
Eye Contact Rinse thoroughly with plenty of water for at least 15 minutes.
Skin Contact Wash off immediately with soap and plenty of water.
Ingestion If swallowed, do not induce vomiting. Get medical attention immediately.
Inhalation Move to fresh air. Oxygen or artificial respiration if needed.
5. FIRE-FIGHTING MEASURES
Flammable Properties No information available
Suitable Extinguishing Media Use extinguishing measures that are appropriate to local circumstances and the surrounding
environment. Contact with water may cause violent frothing. Use: Carbon dioxide (CO2) -
Foam - Dry chemical
Hazardous Decomposition Products No information available
Specific Hazards Arising from the Chemical
Thermal decomposition can lead to release of irritating gases and vapours. In the event of fire and/or explosion do not breathe fumes.
Protective Equipment and Precautions for Firefighters
Use water spray to cool unopened containers. In the event of fire, wear self-contained breathing apparatus. Keep away from
heat/sparks/open flames/hot surfaces. May cause heat and pressure build-up in closed containers.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions Avoid contact with skin, eyes and clothing. Use personal protective equipment. Remove all
sources of ignition.
Environmental Precautions Prevent further leakage or spillage if safe to do so. Do not flush into surface water or sanitary
sewer system.
Methods for Cleaning Up If spilled, contain spilled material and remove with inert absorbent. Dispose of contaminated
absorbent, container and unused contents in accordance with local, state and federal
regulations.
Other Information Not applicable
7. HANDLING AND STORAGE
Handling
Close container after each use. Avoid contact with skin, eyes and clothing. Do not eat, drink or smoke when using this product. If
splashes are likely to occur, wear goggles. Wear protective gloves/clothing. Do not burn, or use a cutting torch on, the empty drum.
When used in a mixture, read the labels and safety data sheets of all components. Wash thoroughly after handling.
Storage
Prevent build-up of vapors by opening all windows and doors to achieve cross ventilation.
_____________________________________________________________________________________________
Page 2 / 5
F218-0218B - MORTARCLAD CLEAR Revision Date: 29-Dec-2009
_____________________________________________________________________________________________
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Guidelines
Engineering Measures Ensure adequate ventilation, especially in confined areas
Personal Protective Equipment
Skin Protection Lightweight protective clothing, Apron, Impervious gloves
Eye/face Protection Goggles. If splashes are likely to occur, wear face-shield.
Respiratory Protection Use only with adequate ventilation. Do not breathe dust, vapors or spray mist. Ensure
fresh air entry during application and drying. If you experience eye watering, headache or
dizziness or if air monitoring demonstrates vapor/mist levels are above applicable limits,
wear an appropriate, properly fitted respirator (NIOSH approved) during and after application.
Follow respirator manufacturer's directions for respirator use.
General Hygiene Handle in accordance with good industrial hygiene and safety practice.
Considerations Avoid breathing dust created by cutting, sanding, or grinding.
9. PHYSICAL AND CHEMICAL PROPERTIES
Flash Point Not applicable
Method Pensky Martens - Closed Cup
Boiling Point/Range No information available
Upper Exposure Limits No information available
Lower Exposure Limits No information available
Evaporation Rate No information available
Vapour Pressure No information available
Vapour Density No information available
Specific Gravity 1.06696
Density 8.87870
VOC Content (lbs/gal) .000
% Volatile by Weight 54.3330
% Volatile by Volume 57.9118
10. STABILITY AND REACTIVITY
Chemical stability Stable. Conditions to Avoid Heat, flames and sparks
Incompatible Products No information available Possibility of Hazardous None under normal processing
Reactions
11. TOXICOLOGICAL INFORMATION
Acute Toxicity
Component Information
Component LD50 Oral LD50 Dermal LC50 Inhalation
WATER 90 mL/kg ( Rat )
Irritation No information available
Corrosivity No information available
Sensitization No information available
Chronic Toxicity
_____________________________________________________________________________________________
Page 3 / 5
F218-0218B - MORTARCLAD CLEAR Revision Date: 29-Dec-2009
_____________________________________________________________________________________________
Carcinogenicity The table below indicates whether each agency has listed any ingredient as a carcinogen
Mutagenic Effects No information available
Reproductive Effects No information available
Developmental Effects No information available
Teratogenicity No information available
Target Organ Effects Eyes, Skin, Gastrointestinal tract.
Endocrine Disruptor Information No information available
12. ECOLOGICAL INFORMATION
Ecotoxicity
.
13. DISPOSAL CONSIDERATIONS
Waste Disposal Methods Keep container tightly closed. If spilled, contain spilled material and remove with inert
absorbent. Dispose of contaminated absorbent, container and unused contents in accordance
with local, state and federal regulations.
Contaminated Packaging Empty containers should be taken for local recycling, recovery or waste disposal
14. TRANSPORT INFORMATION
DOT Ground Transportation Only. Call TNEMEC Traffic Department - 816-474-3400 for other modes of Transportation.
Proper Shipping Name PAINT,WATER BASE FREEZABLE
15. REGULATORY INFORMATION
International Inventories
TSCA Complies
DSL/NDSL Does not Comply
EINECS/ELINCS Does not Comply
CHINA Does not Comply
ENCS Does not Comply
KECL Does not Comply
PICCS Does not Comply
AICS Does not Comply
U.S. Federal Regulations
SARA 313
SARA 311/312 Hazardous Categorization
Chronic Health Hazard No
Acute Health Hazard Yes
Fire Hazard Yes
Sudden Release of Pressure Hazard No
Reactive Hazard No
_____________________________________________________________________________________________
Page 4 / 5
F218-0218B - MORTARCLAD CLEAR Revision Date: 29-Dec-2009
_____________________________________________________________________________________________
CERCLA
U.S. State Regulations
California Proposition 65
This product contains the following Proposition 65 chemicals:
State Right-to-Know
Other International Regulations
Canada
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and
the MSDS contains all the information required by the CPR.
WHMIS Hazard Class
D2B Toxic materials
E Corrosive material
Legend
NPRI - National Pollutant Release Inventory
16. OTHER INFORMATION
Revision Date: 29-Dec-2009
Revision Summary No information available
HMIS Health 3 Flammability 1 Reactivity 1
Disclaimer
For specific information regarding occupational safety and health standards, please refer to the Code of Federal
Regulations, Title 29, Part 1910.
To the best of our knowledge, the information contained herein is accurate. However, neither the Tnemec Company or any
of its subsidiaries assume any liability whatsoever for the accuracy of completeness of the information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown
health hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that
these are the only hazards which exist.
End of MSDS
_____________________________________________________________________________________________
Page 5 / 5
Material Safety Data Sheet
Preparation Date: 30-Dec-2009 Revision Date: 29-Dec-2009 Revision Number: 0
1. PRODUCT AND COMPANY IDENTIFICATION
Product Code F218-0218C
Trade Name MORTARCLAD AGGREGATE
Contact Manufacturer Tnemec Company, Inc. 6800 Corporate Drive, Kansas City, MO 64120-1372
Emergency Telephone Number 800-535-5053 (INFOTRAC) - TNEMEC REGULATORY DEPT: 816-474-3400
2. HAZARDS IDENTIFICATION
Emergency Overview
WARNING!
MAY CAUSE EYE INJURY.
HARMFUL BY INHALATION.
MAY CAUSE EYE, SKIN, NOSE, THROAT AND RESPIRATORY TRACT IRRITATION.
Potential Health Effects
Principle Routes of Exposure Eye contact, Inhalation, Skin contact.
Acute Effects
Eyes May cause eye injury. Exposure of sufficient duration to wet cement, or to dry cement on
moist areas of the body, can cause serious, potentially irreversible tissue (skin, eye,
respiratory tract) damage due to chemical (caustic) burns, including third degree burns.
Skin Irritating to skin. Exposure of sufficient duration to wet cement, or to dry cement on moist
areas of the body, can cause serious, potentially irreversible tissue (skin, eye, respiratory
tract) damage due to chemical (caustic) burns, including third degree burns.
Inhalation Irritating to respiratory system. Respirable crystalline silica (quartz) can cause silicosis, a
fibrosis (scarring) of the lungs. Exposure of sufficient duration to wet cement, or to dry
cement on moist areas of the body, can cause serious, potentially irreversible tissue (skin,
eye, respiratory tract) damage due to chemical (caustic) burns, including third degree burns.
Ingestion May be harmful if swallowed.
Chronic Effects
Cancer hazard. Contains crystalline silica which can cause cancer. (Risk of cancer depends on duration and level of exposure.)
See Section 11 for additional Toxicological information.
Aggravated Medical Conditions Skin disorders.
Interactions with Other Chemicals No information available.
Potential Environmental Effects See Section 12 for additional Ecological information
Target Organ Effects Eyes, Lungs, Respiratory system, Skin
3. COMPOSITION/INFORMATION ON INGREDIENTS
_____________________________________________________________________________________________
Page 1 / 6
F218-0218C - MORTARCLAD AGGREGATE Revision Date: 29-Dec-2009
_____________________________________________________________________________________________
3. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous Components
CAS-No Weight %
Component
14808-60-7 59.9823
CRYSTALLINE SILICA (QUARTZ)
65997-15-1 30 - 60
CALCIUM SILICATES AND ALUMINATES
4. FIRST AID MEASURES
Eye Contact Rinse thoroughly with plenty of water for at least 15 minutes.
Skin Contact Wash off immediately with soap and plenty of water.
Ingestion If swallowed, do not induce vomiting. Get medical attention immediately.
Inhalation Move to fresh air. Oxygen or artificial respiration if needed.
5. FIRE-FIGHTING MEASURES
Flammable Properties No information available.
Suitable Extinguishing Media Foam, carbon dioxide, and dry chemical.
Hazardous Decomposition Products No information available
Specific Hazards Arising from the Chemical
Thermal decomposition can lead to release of irritating gases and vapours. In the event of fire and/or explosion do not breathe fumes.
Protective Equipment and Precautions for Firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective
gear.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions Avoid contact with skin, eyes and clothing. Use personal protective equipment. Remove all
sources of ignition.
Environmental Precautions Prevent further leakage or spillage if safe to do so. Do not flush into surface water or sanitary
sewer system.
Methods for Cleaning Up Shovel or sweep up.
Other Information Not applicable
7. HANDLING AND STORAGE
Handling
Close container after each use. Avoid contact with skin, eyes and clothing. Do not eat, drink or smoke when using this product.
Tightly fitting safety goggles. Wear protective gloves/clothing. When used in a mixture, read the labels and safety data sheets of all
components. Wash thoroughly after handling.
Storage
Keep away from heat, sparks and flame. Keep container tightly closed.
_____________________________________________________________________________________________
Page 2 / 6
F218-0218C - MORTARCLAD AGGREGATE Revision Date: 29-Dec-2009
_____________________________________________________________________________________________
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Guidelines
Component ACGIH TLV OSHA PEL Quebec TWAEV Ontario TWAEV Mexico OEL (TWA)
TWA: 0.025 mg/m3 TWA: 0.1 mg/m3 TWA: 0.1 mg/m3 TWA: 0.10 mg/m3 TWA: 0.1 mg/m3
CRYSTALLINE SILICA
(QUARTZ)
TWA: 10 mg/m3 TWA: 10 mg/m3 TWA: 5 TWA: 10 mg/m3 TWA: 5 TWA: 10 mg/m3 TWA: 10 mg/m3 STEL:
CALCIUM SILICATES AND
mg/m3 TWA: 15 mg/m3 mg/m3 20 mg/m3
ALUMINATES
Engineering Measures Ensure adequate ventilation, especially in confined areas
Personal Protective Equipment
Skin Protection Lightweight protective clothing, Apron, Impervious gloves
Eye/face Protection Tightly fitting safety goggles
Respiratory Protection Use only with adequate ventilation. Do not breathe dust, vapors or spray mist. Ensure
fresh air entry during application and drying. If you experience eye watering, headache or
dizziness or if air monitoring demonstrates vapor/mist levels are above applicable limits,
wear an appropriate, properly fitted respirator (NIOSH approved) during and after application.
Follow respirator manufacturer's directions for respirator use.
General Hygiene Handle in accordance with good industrial hygiene and safety practice.
Considerations Avoid breathing dust created by cutting, sanding, or grinding.
9. PHYSICAL AND CHEMICAL PROPERTIES
Flash Point Not applicable
Boiling Point/Range No information available.0.0
Upper Exposure Limits No information available
Lower Exposure Limits No information available
Evaporation Rate No information available
Vapour Pressure No information available
Vapour Density No information available
Specific Gravity 2.83540
Density 23.59475
VOC Content (lbs/gal) .000
% Volatile by Weight .0000
% Volatile by Volume .0000
10. STABILITY AND REACTIVITY
Chemical stability Stable. Conditions to Avoid Heat, flames and sparks
Incompatible Products Acids. Strong oxidizing agents. Possibility of Hazardous None under normal processing
Reactions
11. TOXICOLOGICAL INFORMATION
Acute Toxicity
Component Information
Component LD50 Oral LD50 Dermal LC50 Inhalation
CRYSTALLINE SILICA (QUARTZ) 500 mg/kg ( Rat )
_____________________________________________________________________________________________
Page 3 / 6
F218-0218C - MORTARCLAD AGGREGATE Revision Date: 29-Dec-2009
_____________________________________________________________________________________________
Irritation No information available
Corrosivity No information available
Sensitization No information available
Chronic Toxicity
Carcinogenicity The table below indicates whether each agency has listed any ingredient as a carcinogen
Component ACGIH IARC NTP OSHA Mexico
CRYSTALLINE SILICA A2 Group 1 Known X
(QUARTZ)
Mutagenic Effects No information available
Reproductive Effects No information available
Developmental Effects No information available
Teratogenicity No information available
Target Organ Effects Eyes, Lungs, Respiratory system, Skin.
Endocrine Disruptor Information No information available
12. ECOLOGICAL INFORMATION
Ecotoxicity
.
13. DISPOSAL CONSIDERATIONS
Waste Disposal Methods Keep container tightly closed. If spilled, contain spilled material and remove with inert
absorbent. Dispose of contaminated absorbent, container and unused contents in accordance
with local, state and federal regulations.
Contaminated Packaging Empty containers should be taken for local recycling, recovery or waste disposal
14. TRANSPORT INFORMATION
DOT Ground Transportation Only. Call TNEMEC Traffic Department - 816-474-3400 for other modes of Transportation.
Proper Shipping Name SILCA,N.O.I.-20-P.C.F.,GREATER (ITEM 176370,Sub 3)
15. REGULATORY INFORMATION
International Inventories
TSCA Complies
DSL/NDSL Complies
EINECS/ELINCS Complies
CHINA Complies
ENCS Does not Comply
KECL Complies
PICCS Does not Comply
AICS Complies
U.S. Federal Regulations
SARA 313
_____________________________________________________________________________________________
Page 4 / 6
F218-0218C - MORTARCLAD AGGREGATE Revision Date: 29-Dec-2009
_____________________________________________________________________________________________
SARA 311/312 Hazardous Categorization
Chronic Health Hazard No
Acute Health Hazard Yes
Fire Hazard Yes
Sudden Release of Pressure Hazard No
Reactive Hazard No
CERCLA
U.S. State Regulations
California Proposition 65
This product contains the following Proposition 65 chemicals:
Component CAS-No California Prop. 65
CRYSTALLINE SILICA (QUARTZ) 14808-60-7 Carcinogen
State Right-to-Know
Component Massachusetts New Jersey Pennsylvania Illinois Rhode Island
CRYSTALLINE SILICA X X X X
(QUARTZ)
CALCIUM SILICATES AND X X X X
ALUMINATES
Other International Regulations
Canada
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and
the MSDS contains all the information required by the CPR.
WHMIS Hazard Class
D2A Very toxic materials
Legend
NPRI - National Pollutant Release Inventory
16. OTHER INFORMATION
Revision Date: 29-Dec-2009
Revision Summary No information available
HMIS Health 2 Flammability 0 Reactivity 0
_____________________________________________________________________________________________
Page 5 / 6
F218-0218C - MORTARCLAD AGGREGATE Revision Date: 29-Dec-2009
_____________________________________________________________________________________________
Disclaimer
For specific information regarding occupational safety and health standards, please refer to the Code of Federal
Regulations, Title 29, Part 1910.
To the best of our knowledge, the information contained herein is accurate. However, neither the Tnemec Company or any
of its subsidiaries assume any liability whatsoever for the accuracy of completeness of the information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown
health hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that
these are the only hazards which exist.
End of MSDS
_____________________________________________________________________________________________
Page 6 / 6
|