801843PM Page 1 of 7
03-12-2008
MATERIAL SAFETY DATA SHEET
__________________________________________________________________________________________
REVISION DATE: 02-19-2008 12-10-2007
SUPERSEDES:
SECTION 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
COMPANY INFORMATION
Specialty Construction Brands, Inc.
An H.B. Fuller Company
1105 S. Frontenac Street
Aurora, IL 60504
Phone: 1-800-323-7407
Medical Emergency Phone Number (24 Hours): 1-888-853-1758
Transport Emergency Phone Number (CHEMTREC): 1-800-424-9300
PRODUCT INFORMATION
PRODUCT IDENTIFIER: 801843PM
PRODUCT NUMBER: CP0960
PRODUCT NAME: CHILDERS CP-96
PRODUCT DESCRIPTION: Adhesive
SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS
Unlisted ingredients are not 'hazardous' per the Occupational Safety and Health Administration Hazard
Communication Standard (29 CFR 1910.1200) and/or are not found on the Canadian Workplace Hazardous
Materials Information System ingredient disclosure list. See Section 8 for any additional exposure limit guidelines.
Chemical Name CAS # PERCENT OSHA PEL
Hexane, n 110-54-3 30 - 50 TWA 50ppm
Kaolin clay 1332-58-7 10 - 30 TWA (Total dust) 10MG/M3
TWA (Respirable dust) 5MG/M3
Methylcyclopentane 96-37-7 5 - 10 Not established
Calcium carbonate 471-34-1 1-5 TWA (Total dust) 15MG/M3
TWA (Respirable dust) 5MG/M3
Heptane 142-82-5 1-5 TWA 400ppm
STEL 500ppm
Crystalline silica 14808-60-7 0.1 - 1 TWA (Respirable dust) 0.1MG/M3
Titanium dioxide 13463-67-7 0.1 - 1 TWA (Total dust) 10MG/M3
Cristobalite 14464-46-1 0.1 - 1 TWA (Respirable dust) 0.05MG/M3
801843PM Page 2 of 7
03-12-2008
MATERIAL SAFETY DATA SHEET
__________________________________________________________________________________________
Naphthalene 91-20-3 0.1 - 1 TWA 10ppm
STEL 15ppm
SECTION 3: HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Extremely flammable.
Can cause eye irritation.
Can cause skin irritation. May cause allergic skin reaction.
Harmful if swallowed.
Cancer hazard.
HMIS RATING: HEALTH -- 2 FLAMMABILITY -- 3 REACTIVITY -- 0
See SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION for personal protective equipment
recommendations.
POTENTIAL HEALTH EFFECTS BY ROUTE OF ENTRY
EYE: Can cause irritation. May result in cornea opacity (clouding of the eye surface).
SKIN: Can cause skin irritation. May cause sensitization.
INHALATION: Can cause minor respiratory irritation. Inhalation of dusts produced during cutting, grinding or
sanding of this product may cause irritation of the respiratory tract.
Inhalation of vapors may cause loss of feeling and weakness in the hands and feet and loss of manual dexterity.
Inhalation of high concentrations may result in central nervous system (CNS) effects such as dizziness, weakness,
fatigue, nausea, headache, and lack of coordination. Overexposure to crystalline silica may cause silicosis.
This product contains one or more materials that may be hazardous when present as an airborne dust. During normal
handling of the product, the material is encapsulated within the product and will not present an exposure risk. Once
the product has reached its final state and is abraded or disturbed, dusting and exposure may occur.
INGESTION: Ingestion is not an anticipated route of exposure. Harmful if swallowed. Irritating to mouth, throat,
and stomach.
LONG-TERM (CHRONIC) HEALTH EFFECTS
TARGET ORGAN(S): Central nervous system Peripheral nervous system Lungs Kidneys Blood Liver
REGULATED CARCINOGEN STATUS:
Unless noted below, this product does not contain regulated levels of NTP, IARC, ACGIH, or OSHA listed
carcinogens.
Crystalline silica
Titanium dioxide
Cristobalite
Naphthalene
EXISTING HEALTH CONDITIONS AFFECTED BY EXPOSURE: Lung disease; Kidney disease; Blood
disorders (like anemia); Liver disease
SECTION 4: FIRST AID MEASURES
IF IN EYES: Use an eye wash to remove a chemical from your eye regardless of the level of hazard. Flush the
affected eye for at least twenty minutes. Tilt the head to prevent chemical from transferring to the uncontaminated
eye. Seek medical advice after flushing.
IF ON SKIN: Wash with soap and water. Get medical attention if irritation develops or persists.
IF VAPORS INHALED: Remove to fresh air. Call a physician if symptoms persist.
801843PM Page 3 of 7
03-12-2008
MATERIAL SAFETY DATA SHEET
__________________________________________________________________________________________
IF SWALLOWED: Do not induce vomiting. Seek medical attention immediately. Drink two glasses of water or
milk to dilute. Do not give anything by mouth to an unconscious person. Induced vomiting may lead to aspiration of
the material into the lungs potentially causing chemical pneumonitis that may be fatal.
SECTION 5: FIRE FIGHTING MEASURES
FLASH POINT: -18C; 0F
AUTOIGNITION TEMPERATURE: Not established
LOWER EXPLOSIVE LIMIT (% in air): Not established
UPPER EXPLOSIVE LIMIT (% in air): Not established
EXTINGUISHING MEDIA: Use water spray, foam, dry chemical or carbon dioxide.
UNUSUAL FIRE AND EXPLOSION HAZARDS: Vapors are heavier than air and can travel to a source of ignition
and flash back.
SPECIAL FIRE FIGHTING INSTRUCTIONS: Persons exposed to products of combustion should wear self-
contained breathing apparatus and full protective equipment.
HAZARDOUS COMBUSTION PRODUCTS: Carbon dioxide, Carbon monoxide
SECTION 6: ACCIDENTAL RELEASE MEASURES
SPECIAL PROTECTION: Exposure to the spilled material may be irritating or harmful. Follow
personal protective equipment recommendations found in Section 8 of this
MSDS. Additional precautions may be necessary based on special
circumstances created by the spill including; the material spilled, the quantity
of the spill, the area in which the spill occurred. Evaporation of volatile
substances can lead to the displacement of air creating an environment that
can cause asphyxiation.
CLEAN-UP: Dike if necessary, contain spill with inert absorbent and transfer to containers
for disposal. Keep spilled product out of sewers, watersheds, or water
systems.
Shut off ignition sources; including electrical equipment and flames. Do not
allow smoking in the area.
Transport Emergency Phone Number (CHEMTREC): 1-800-424-9300
SECTION 7: HANDLING AND STORAGE
Handling: Harmful or irritating material. Avoid contacting and avoid breathing the material. Use only in
a well ventilated area.
Keep away from heat, sparks and flame.
Wash thoroughly after handling.
Keep container closed.
Emptied container retains vapor and product residue.
Observe all labeled precautions until container is cleaned.
Drums of this material should be grounded when pouring.
DO NOT CUT OR WELD ON OR NEAR THIS CONTAINER.
Storage: Store in a cool, dry, ventilated location. Keep away from heat, sparks, flame and other
sources of ignition. Keep container closed.
Consult the Technical Data Sheet for specific storage instructions.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
EYE PROTECTION: Wear safety glasses when handling this product.
SKIN PROTECTION: Avoid skin contact by wearing chemically resistant gloves. Skin
absorption may potentially contribute to the overall exposure to this
material. Appropriate measures should be taken to prevent
801843PM Page 4 of 7
03-12-2008
MATERIAL SAFETY DATA SHEET
__________________________________________________________________________________________
absorption so that the TLV is not invalidated.
GLOVES: Nitrile
RESPIRATORY PROTECTION: Respiratory protection may be required to avoid overexposure when
handling this product. Use a respirator if general room ventilation is
not available or sufficient to eliminate symptoms. NIOSH approved
air purifying respirator with organic vapor cartridge.
Respirators should be selected by and used following requirements
found in OSHA's respirator standard (29 CFR 1910.134).
VENTILATION: Use local exhaust ventilation or other engineering controls to
minimize exposures.
EXPOSURE LIMITS:
Chemical Name ACGIH EXPOSURE LIMITS AIHA WEEL
Hexane, n TWA 50ppm Not established
Skin notation
Kaolin clay TWA (Respirable dust) 2MG/M3 Not established
Methylcyclopentane Not established Not established
Calcium carbonate TWA 10MG/M3 Not established
Heptane TWA 400ppm Not established
STEL 500ppm
Crystalline silica TWA (Respirable dust) 0.025MG/M3 Not established
Titanium dioxide TWA 10MG/M3 Not established
Cristobalite TWA (Respirable dust) 0.025MG/M3 Not established
Naphthalene TWA 10ppm Not established
STEL 15ppm
Skin notation
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Liquid
COLOR: Light Tan
ODOR: Solvent
ODOR THRESHOLD: Not established
WEIGHT PER GALLON (lbs.): 8.00
SPECIFIC GRAVITY: 0.96
801843PM Page 5 of 7
03-12-2008
MATERIAL SAFETY DATA SHEET
__________________________________________________________________________________________
SOLIDS (% by weight): 60.0
pH: Not established
BOILING POINT (deg. C): Not established
FREEZING/MELTING POINT (deg. C): Not established
VAPOR PRESSURE (mm Hg): Not established
VAPOR DENSITY: Not established
EVAPORATION RATE: Not established
OCTANOL/WATER COEFFICIENT: Not established
SECTION 10: STABILITY AND REACTIVITY
STABILITY: Stable under normal conditions.
CHEMICAL INCOMPATIBILITY: Strong oxidizing agents
HAZARDOUS POLYMERIZATION: Will not occur.
HAZARDOUS DECOMPOSITION PRODUCTS: Carbon monoxide, carbon dioxide
SECTION 11: TOXICOLOGICAL INFORMATION
CHEMICAL NAME LD50/LC50
Hexane, n Oral LD50 Rat = 28710mg/kg
Inhalation LC50 Rat = 48000ppm/4H
Kaolin clay Not established
Methylcyclopentane Not established
Calcium carbonate Oral LD50 Rat = 6450mg/kg
Heptane
Inhalation LC50 Rat = 103000mg/cu m/4H
Crystalline silica Not established
Titanium dioxide Not established
Cristobalite Not established
Naphthalene Oral LD50 Rat = 490mg/kg
Inhalation LC50 Rat > 85mg/cu m/4H
Dermal LD50 Rabbit > 20g/kg
TOXICOLOGY SUMMARY: No additional health information available.
SECTION 12: ECOLOGICAL INFORMATION
OVERVIEW: No ecological information available
406 g VOC/liter of material, less water and exempt solvents
(VOC theoretically determined using EPA Reference method 24)
SECTION 13: DISPOSAL CONSIDERATIONS
This product meets the definition of hazardous waste under the U.S. EPA Hazardous Waste Regulations 40 CFR
261. It is ignitable waste class D001. Disposal via incineration is recommended. Consult your state, local, or
provincial authorities for more restrictive requirements.
801843PM Page 6 of 7
03-12-2008
MATERIAL SAFETY DATA SHEET
__________________________________________________________________________________________
LAND DISPOSAL RESTRICTIONS: Naphthalene
SECTION 14: TRANSPORTATION INFORMATION
Consult Bill of Lading for transportation information.
DOT: UN1133, ADHESIVES, 3, II
IATA: UN1133, ADHESIVES, 3, II
SECTION 15: REGULATORY INFORMATION
INVENTORY STATUS
U.S. EPA TSCA: This product is in compliance with the Toxic Substances Control Act's
Inventory requirements.
CANADIAN CEPA DSL: This product is in compliance with the Canadian Domestic Substance List
requirements.
EUROPEAN EINECS: This product is in compliance with the European Inventory of Notified and
Existing Chemical Substances requirements.
AUSTRALIA AICS: This product is in compliance with the Australian Inventory of Chemical
Substances requirements.
KOREAN TCCL: This product is in compliance with the Korean Existing Chemicals List
requirements.
If you need more information about the inventory status of this product call 651-236-5858.
This product may contain chemical substances that are regulated for export by various government agencies (such as
the Environmental Protection Agency, the Bureau of Industry and Security, or the Drug Enforcement
Administration, among others). Before exporting this product from the USA or Canada, we recommend you contact
us at 651-236-5858 (USA) or 450-655-1306 x227 (Canada) to request an export review.
FEDERAL REPORTING
EPA SARA Title III Section 313
Unless listed below, this product does not contain toxic chemical(s) subject to the reporting requirements of section
313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA) and 40 CFR part 372. EPA
has advised that when a percentage range is listed the midpoint may be used to fulfill reporting obligations.
Chemical Name CAS# %
n-Hexane 110-54-3 30 - 50
Naphthalene 91-20-3 0.1 - 1
WHMIS STATUS: Unless listed below, this product is not controlled under the Canadian Workplace Hazardous
Materials Information System.
B2
D2B D2A D1A
STATE REPORTING
This MSDS is not prepared for distribution in California.
SECTION 16: ADDITIONAL INFORMATION
This Material Safety Data Sheet is prepared to comply with the United States Occupational Safety and Health
Administration (OSHA) Hazard Communication Standard (29 CFR 1910.1200) and the Canadian Workplace
Hazardous Materials Information System (WHMIS).
Prepared by: The Global Regulatory Department
Phone: 651-236-5842
801843PM Page 7 of 7
03-12-2008
MATERIAL SAFETY DATA SHEET
__________________________________________________________________________________________
The information and recommendations set forth herein are believed to be accurate. Because some of the information
is derived from information provided to Specialty Construction Brands, Inc. from its suppliers, and because
Specialty Construction Brands, Inc. has no control over the conditions of handling and use, Specialty Construction
Brands, Inc. makes no warranty, expressed or implied, regarding the accuracy of the data or the results to be
obtained from the use thereof. The information is supplied solely for your information and consideration, and
Specialty Construction Brands, Inc. assumes no responsibility for use or reliance thereon. It is the responsibility of
the user of Specialty Construction Brands, Inc. products to comply with all applicable federal, state and local laws
and regulations.
|