Certificate of Compliance &
Material Safety Data Sheet
For Health Emergencies: CALL A POISON CONTROL CENTER
For Transportation Emergencies ONLY: Call Chem-Tel
USA, Canada, Puerto Rico, US Virgin Islands: Call 800-255-3924
Outside North America: Call Collect 813-248-0585
Date Prepared
Rev: 15 October 2009
Replaces: 15 June 2009
Certificate of Compliance Section 1 - PRODUCT AND COMPANY IDENTIFICATION
1.1 PRODUCT NAME: Weber?RapidryTM Quick Drying Oil Medium
1.2 ITEM NUMBER AND SIZES: 1711 - 118ml
1.3 CPSC SAFETY REGULATION CITATION
This adult product is certified to comply with the Consumer Product
Safety Act (CPSA), the Federal Hazardous Substances Act, (FHSA) and
its Labeling for Hazardous Art Materials Amendment, (LHAMA.)
1.4 MANUFACTURER IDENTIFICATION:
Martin/F. Weber Co.
2727 Southampton Road ?Philadelphia, PA 19154 USA
Phone: 215-677-5600 ?Fax: 215-677-3336
Email: compliance@weberart.com ?Web: www.weberart.com
1.5 CONTACT INFORMATION:
Regulatory & Compliance Manager
Martin/F. Weber Co.
2727 Southampton Road ?Philadelphia, PA 19154 USA
Phone: 215-677-5600 ?Fax: 215-677-3336
Email: compliance@weberart.com
1.6 DATE & PLACE OF MANUFACTURE:
For purposes of the Consumer Product Safety Improvement Act, (CPSIA),
this product is deemed to be manufactured as of the date of shipment, at
the above address.
1.7 DATE & PLACE PRODUCT TESTED FOR COMPLIANCE WITH THE REGULATIONS ABOVE (1.4):
Date: 9 August 2007
Place: Duke University Medical Center
2200 West Main Street, Suite 400
Durham NC 27705
1.8 THIRD-PARTY LABORATORY(S) ON WHICH THIS CERTIFICATE DEPENDS
N/A
MSDS Section 1 - PRODUCT AND COMPANY IDENTIFICATION
1.1 PRODUCT NAME: Weber?RapidryTM Quick Drying Oil Medium
1.2 ITEM NUMBER AND SIZES: 1711 - 118ml
1.3 COMPANY IDENTIFICATION:
Martin/F. Weber Co.
2727 Southampton Road ?Philadelphia, PA 19154 USA
Phone: 215-677-5600 ?Fax: 215-677-3336
Email: compliance@weberart.com ?Web: www.weberart.com
SECTION 2 ?COMPOSTION INFORMATION
COMPONENT CAS # MAX. AMOUNT
(% Weight)
Aliphatic Hydrocarbon 8052-41-3 70
2-2 ' Bipyridyl 872-50-4 <1
SECTION 3 ?HAZARDS IDENTIFICATION
3.1 EMERGENCY OVERVIEW
Appearance: Clear brown liquid
Physical State: Liquid
Odor: Mild petroleum solvent odor
Hazards of Product: DANGER: Combustible, Harmful or Fatal if Swallowed. Vapor Harmful
3.2 POTENTIAL HEALTH EFFECTS
EFFECTS OF SINGLE ACUTE OVEREXPOSURE:
Harmful or fatal if swallowed. Vapor Harmful.
CHRONIC, PROLONGED OR REPEATED OVEREXPOSURE:
Vapor Harmful.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: n/a
3. 3 POTENTIAL ENVIRONMENTAL EFFECTS: n/a
SECTION 4 ?FIRST AID PROCEDURES
4.1 INHALATION: Move to fresh air. Get prompt medical attention.
4.2 EYE CONTACT: Wash eyes with tap water for five to ten (5 ?10) minutes. If irritation persists, seek prompt
medical attention.
4.3 SKIN CONTACT: Wash affected area with soap and water for five to ten (5 ?10) minutes. If irritation
persists, seek prompt medical attention.
4.4 SWALLOWING: If swallowed, do not induce vomiting. Get immediate medical attention.
4.2 NOTES TO PHYSICIAN: n/a
SECTION 5 - FIRE FIGHTING MEASURES
5.1 FLAMMABLE PROPERTIES
Identification Number: UN 1263
Flash Point ?Closed Cup: 118篎 (48篊)
Flash Point ?Open Cup: n/a
Auto-Ignition Temperature: n/a
Flammable Limits in Air: n/a
5.2 EXTINGUISHING MEDIA Foam, CO2, Dry Chemical (Class B) or Halon?br>
5.3 EXTINGUISHING MEDIA
TO AVOID Water
5.4 SPECIAL FIRE FIGHTING
PROCEDURES n/a
5.5 SPECIAL PROTECTIVE
EQUIPMENT FOR FIREFIGHTERS As with any fire situation, full face, self contained breathing apparatus
and appropriate protective clothing should be worn.
5.6 UNUSUAL FIRE AND
EXPLOSION HAZARDS n/a
5.7 HAZARDOUS COMBUSTION
PRODUCTS Under fire conditions, this product may release CO, CO2, and other
decomposition products of undetermined hazard.
SECTION 6 ?ACCIDENTAL RELEASE MEASURES
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED: Keep sources of ignition away. Small
quantities may be cleaned up with rags or paper towels and transferred to airtight containers for disposal. Rags or
paper towels soaked with this material should be placed in approved waste cans and / or soaked with water, for
disposal in accordance with local state and federal regulations.
SECTION 7 ?HANDLING AND STORAGE
7.1 GENERAL HANDLING: Avoid ingestion. Avoid breathing vapors. Use exhaust fan to remove vapors and
assure adequate ventilation. Do not transfer contents to unlabeled containers. KEEP OUT OF THE REACH OF
CHILDREN. Keep from sources of ignition, oxidizing materials, heat and flame. KEEP AWAY FROM OPEN
FLAMES. NO SMOKING in areas of use or storage.
7.2 STORAGE: Keep from sources of ignition, oxidizing materials, heat and flame. Keep containers closed when
not in use.
SECTION 8 ?EXPOSURE CONTROLS AND PERSONAL PROTECTION
8.1 EXPOSURE LIMITS: 100 PPM ACGIH TLV
8.2 PERSONAL PROTECTION:
Respiratory Protection: Not required if adequate cross ventilation is maintained.
Ventilation: Use local exhaust fan to assure adequate cross ventilation in working
area and to remove fumes. Avoid vapor buildup.
Eye Protection: Use OSHA approved chemical splash goggles with side shields
Protective Gloves: Neoprene or rubber ?impervious gloves
Other Protective Equipment: Body protection suitable for the work environment
8.3 ENGINEERING CONTROLS: n/a
SECTION 9 ?PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Liquid
Appearance: Clear brown liquid
pH: n/a
Solubility in Water (by weight): Insoluble
Odor: Mild petroleum solvent odor
Flash Point ?Closed Cup: 118篎 (48篊)
Flash Point ?Open Cup: n/a
Percent Volatiles: 70%
Boiling Point (760mm Hg): n/a
Freezing Point: n/a
Specific Gravity (H2O = 1): 0.80
Vapor Pressure at 20篊: 4mg Hg
Vapor Density (air = 1): >1
Evaporation Rate <1
(Butyl Acetate = 1):
Melting Point: n/a
Section 10 ?STABILITY AND REACTIVITY
10.1 STABILITY / INSTABILITY Stable under ordinary conditions of use and storage
Conditions to Avoid Keep from heat, open flame and sources of ignition
Incompatible Materials Strong oxidizing agents, acids or acidic materials
10.2 HAZARDOUS
POLYMERIZATION Will not occur
10.3 INHIBITORS / STABILIZERS n/a
SECTION 11 ?TOXICOLOGICAL INFORMATION
ACUTE TOXICITY: Harmful or fatal if swallowed. Vapor Harmful.
CHRONIC TOXICITY: Vapor Harmful.
SECTION 12 ?ECOLOGICAL INFORMATION
12.1 ENVIRONMENTAL FATE n/a
12.2 ECOTOXICITY n/a
12.3 FURTHER INFORMATION n/a
SECTION 13 ?DISPOSAL CONSIDERATIONS
13.1 WASTE DISPOSAL METHOD Dispose of in accordance with local, state and federal regulations
13.2 DISPOSAL CONSIDERATIONS Keep from heat, open flame, sparks and sources of ignition
SECTION 14 ?TRANSPORTATION INFORMATION
U.S. D.O.T Ground Transportation: Not Regulated
Ocean Transportation: UN 1263 Paint Related Material, Class 3, PG III,
Limited Quantity
DO NOT SHIP via air freight without special packaging and
labeling. Contact your air carrier for detailed instructions.
SECTION 15 ?REGULATORY INFORMATION
15.1 FEDERAL / NATIONAL n/a
15.2 STATE / LOCAL n/a
SECTION 16 ?OTHER INFORMATION
The information presented here is current as of the date of this Material Safety Data Sheet and is believed to be
accurate but is not warranted to be, whether originating with the company or not. Since use of this information
and the product are not under the control of Martin/F. Weber Company, it is the user's obligation to determine
conditions of safe use, in advance of use, and to carefully read the product label and follow all instructions for
safe use of the product.
|