MATERIAL SAFETY DATA SHEET
Date Printed: 08/13/2007 Page: 1
Product Code(s): 1231, 1234, 1235
________________________________________________________________________________
1. CHEMICAL PRODUCT AND COMPANY INFORMATION
Product Name: Hydroflex 1.2
Product Code(s): 1231, 1234, 1235
Manufacturer/Supplier: TRANSTAR AUTOBODY TECHNOLOGIES
2040 Heiserman Dr.
Brighton, MI, 48114, USA
24 Hour Emergency Phone(s): 800-424-9300 (CHEMTREC), 613-996-6666 (CANUTEC)
Business Phone: 810-220-3000
Product Use: Primer
MSDS Prepared By: Transtar Autobody Technologies\
________________________________________________________________________________
2. COMPOSITION/INFORMATION ON INGREDIENTS
Ingredient(s) CAS Number % by Weight
---------------------------------------------------------------------------
Acrylic Polymer Non Hazard 15- 25%
Talc 14807-96-6 15- 25%
Barium Sulfate 7727-43-7 5 - 10%
* Ethylene Glycol Monobutyl Ether 111-76-2 5 - 10%
* Diethylene Glycol n-Butyl Ether 112-34-5 0 - 5%
* n-Methyl Pyrrolidone 872-50-4 0 - 5%
See Section 15. Regulatory Information for code descriptions
Weight percent (%) of 0.0 means chemical is in trace amounts.
________________________________________________________________________________
3. HAZARDS IDENTIFICATION
CAUTION! IRRITANT.
HMIS Hazard Ratings: Health =2 , Flammability =1, Chemical Reactivity =0
Note: HMIS ratings involve data and interpretations that may vary
from company to company. They are intended only for rapid, general
identification of the magnitude of the specific hazard. To deal
adequately with the safe handling of this material, all the
information contained in this MSDS must be considered.
Potential Health Effects
Eyes: Minimal to slight irritation to the eyes. Exposure can cause redness
and itching.
Skin: Slight irritation to the skin. Can be absorbed through the skin.
Prolonged contact with this product can cause reddening, swelling, rash
scalling or blistering.
Inhalation: Minimal to slight irritation to the respiratory system. Dust
MATERIAL SAFETY DATA SHEET
Date Printed: 08/13/2007 Page: 2
Product Code(s): 1231, 1234, 1235
________________________________________________________________________________
from sanding may contain respirable size particles which can be irritating
or damaging to the respiratory tract and lungs.
Ingestion: Slight irritation to the digestive tract.
________________________________________________________________________________
4. FIRST AID MEASURES
Seek professional medical attention for all over-exposures and/or
persistent problems.
Eyes Contact: Flush eyes with clean water for a minimum of 15 minutes.
Seek medical attention.
Skin Contact: Wash exposed area thoroughly with soap and water.
Inhalation: Remove person from area to fresh air. If breathing
difficulty persists, seek medical attention.
Ingestion: DO NOT INDUCE VOMITTING. Seek immediate medical attention.
________________________________________________________________________________
5. FIRE FIGHTING MEASURES
Flammable Properties
Flash Point: >212 Deg F, 100 Deg CMethod: TCC
Upper Explosive Limit (UEL): 24.6
Lower Explosive Limit (LEL): .85
Autoignition Temperature: No data
Extinguishing Media: Foam, Alcohol Foam, CO2, Dry Chemical, Water Fog,
Other.
Special Firefighting Procedures: Full fire fighter equipment including
SCBA should be worn to avoid skin contact and inhalation of
concentrated vapors. Minimize skin exposure. Highly toxic fumes may
be generated by thermal decomposition. Water runoff from firefighting
can cause environmental damage. Dike and collect water used to fight
fire.
Hazardous Combustion Products: Carbon monoxide, carbon dioxide, oxides
of nitrogen.
Unusual Fire and Explosion Hazards: Closed containers may explode when
exposed to extreme heat or burst when contaminated with water (CO2 gas
evolved). Hazards apply to empty containers. Combustion generates
toxic fumes.
________________________________________________________________________________
6. ACCIDENTAL RELEASE MEASURES
For large spills or transportation accidents involving release of this
product, contact the Emergency Response Center: 800-424-9300.
This material is not flammable or combustible. A spill of this
material should be treated with care. Eliminate all sources of
MATERIAL SAFETY DATA SHEET
Date Printed: 08/13/2007 Page: 3
Product Code(s): 1231, 1234, 1235
________________________________________________________________________________
ignition, provide adequate ventilation, dike spill area and add
absorbent earth or sawdust to spilled liquid. Sweep up and dispose of
in appropriate containers in accordance with Federal, State and/or
Local regulations.
________________________________________________________________________________
7. HANDLING AND STORAGE
Use in cool, well-ventilated areas. Keep containers closed when not
in use. Keep away from incompatibles. Keep away from excessive heat
and open flames. Follow all MSDS/label precautions even after
container is emptied because they may retain product residues. Store
in a cool area away from heat and flames. Do not reuse container when
empty.
________________________________________________________________________________
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Guidelines
Chemical Name/Exposure Limits CAS Number
---------------------------------------------------------------------------
Acrylic Polymer Non Hazard
OSHA PEL: NA, ACGIH TLV: NA, OTHER: NA
Talc 14807-96-6
OSHA PEL: 20 mppcf; ACGIH TLV: 2 mg/m3
Barium Sulfate 7727-43-7
OSHA PEL: 5mg/m3(resp) 15mg/m3(total),
ACGIH TLV: 10mg/m3
* Ethylene Glycol Monobutyl Ether 111-76-2
OSHA PEL: 50ppm, ACGIH TLV: 20ppm
* Diethylene Glycol n-Butyl Ether 112-34-5
* n-Methyl Pyrrolidone 872-50-4
OSHA PEL: NA, ACGIH TLV: NA, OTHER: 100 ppm
Engineering Controls: Engineering controls should be utilized to
control airborne contaminates below exposure limits (PEL & TLV).
Ventilation equipment must be explosion proof. Use exhaust if general
ventilation is not sufficient to keep the airborne contaminant levels
low.
Respiratory Protection: Utilize engineering controls to reduce
emission levels below the time weighted exposure limits (ACGIH TLV &
OSHA PEL). Wear an approved respirator if exposure limits are above
the exposure limits listed above. When spraying this material utilize
engineering controls such as vents and fans, to reduce emission levels
below the time weighted exposure limits (ACGIH TLV & OSHA PEL) or use
a fresh-air supplying respirator or a self-contained breathing
apparatus (SCBA).
Eye Protection: Use safety glasses or splash goggles.
Skin Protection: Use chemical resistant gloves.
Safe Work Practices: Eye washes and safety showers in the workplace
are recommended. Avoid contact with skin and eyes. Avoid breathing
MATERIAL SAFETY DATA SHEET
Date Printed: 08/13/2007 Page: 4
Product Code(s): 1231, 1234, 1235
________________________________________________________________________________
vapors. Wash hands thoroughly after using and before eating, drinking
or smoking. Employee education and training in the safe use and
handling of this product is required under the OSHA Hazard
Communication Standard 29CFR1200. Smoking in area where this material
is used should be strictly prohibited. Always use protective clothing
and equipment. Remove all contaminated clothing and wash thoroughly
when finished working. Keep food and drink away from material and
from area where material is being used.
________________________________________________________________________________
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical Form: Homogeneous mixture
Physical State: Liquid
Color: Black
Odor: Slight glycol ether
Odor Threshold: No Data
Specific Gravity (water=1) 1.26
Vapor Pressure: No data
Vapor Density: Heavier than air
Material VOC: 1.30 lb/gl 156 g/l
Coating VOC: 2.37 lb/gl 284 g/l
Evaporation Rate: Faster than Butyl Acetate
Boiling Point: 339 deg F
Melting Point: No data
Freezing Point: No data
Viscosity at Ambient Temperature: No data
Solubility in Water: Partial
Octanol/Water Partition Coefficient: No data
pH: No data
________________________________________________________________________________
10. STABILITY AND REACTIVITY
Stability: Stable
Incompatibility: Strong acids, strong bases and strong oxidizing
agents.
Hazardous Polymerization: Will not occur.
________________________________________________________________________________
11. TOXICOLOGICAL INFORMATION
Effects of Exposure:
ACUTE:
INHALATION - Minimal odor present during normal material handling and
use.
EYE CONTACT - Mild irritation, tearing, redness.
SKIN CONTACT - Mild irritation possible.
INGESTION - May cause mild gastrointestinal irritation, vomiting,
nausea, & diarrhea.
CHRONIC:
No chronic health effects known.
Spraying of material can cause an oxygen deficient environment. Use
MATERIAL SAFETY DATA SHEET
Date Printed: 08/13/2007 Page: 5
Product Code(s): 1231, 1234, 1235
________________________________________________________________________________
proper ventilation to remove vapors, mists and fumes or use proper
respiratory protection as SCBA or supplied air.
Acute Toxicity Data: No data.
Carcinogenicity: NTP -No, IARC -No, OSHA -No
This product has not been tested for carcinogenic effects. Some
chemicals in this product may be identified by NTP, IARC and/or OSHA
as carcinogenic, indicated above as "Yes". No further information
available.
Teratology: No data.
Reproduction: Possible reproductive hazard, contains material which
may cause adverse reproductive effects based on animal data. No
further information available.
Mutagenicity: No data.
________________________________________________________________________________
12. ECOLOGICAL INFORMATION
No data.
________________________________________________________________________________
13. DISPOSAL CONSIDERATIONS
This product when disposed represents a non-hazardous waste, as
identified in 40CFR261. It is the responsibility of each waste
generator to identify the proper classification of their waste
streams.
________________________________________________________________________________
14. TRANSPORT INFORMATION
The following transportation information is provided based on Transtar
Autobody Technologies interpretation of shipping regulations. Each
shipper is responsible for identifying, naming, marking and labeling
prior to offering for transport.
USA (DOT) Status: Not regulated
Water (IMDG) Status: Not regulated
Air (ICAO,IATA) Status: Not regulated
Canada (TDG) Status: Not regulated
________________________________________________________________________________
15. REGULATORY INFORMATION
The information listed in this section is not all inclusive of all
regulations for this product or the chemical components of this
product.
US Federal Regulations
MATERIAL SAFETY DATA SHEET
Date Printed: 08/13/2007 Page: 6
Product Code(s): 1231, 1234, 1235
________________________________________________________________________________
TSCA Status: All known major components of this product are listed on
the TSCA Inventory and/or are otherwise in compliance with TSCA.
SARA 302 (EHS) Status: No EHS chemicals present.
SARA 311/312 Status: Imediate Health hazard, Delayed Heath hazard
SARA 313 Status: * Indicates toxic chemical(s) subject to the
reporting requirements of section 313 of Title III and of 40 CFR 372.
OSHA Status: This material meets the requirement of hazardous material
and is subject to 29CFR1910.1200.
USA State Information
California Proposition 65: WARNING: This product contains chemical(s)
known to the State of California to cause cancer.
Pennsylvania RtK Status: This material contains chemical(s) subject to
notification under Pennsylvania Right to Know.
New Jersey RtK Status: This material contains chemical(s) subject to
notification under New Jersey Right to Know.
Massachusetts RtK Status: This material contains chemical(s) subject
to notification under Massachusetts Right to Know.
Rhode Island RtK Status: This material contains chemical(s) subject to
notification under Rhode Island Right to Know.
International Regulations
Canada
DSL Status: All known major components of this product are listed on
the DSL Inventory and/or are otherwise in compliance with the DSL
NDSL Status: Contains no chemicals on the NDSL
WHMIS: D1A D1B D2B
EINECS Status: All components of this material are listed on the
EINECS Inventory.
________________________________________________________________________________
16. OTHER INFORMATION
To the best of our knowledge, the information contained herein is
accurate, obtained from sources believed by Transtar Autobody
Technologies to be accurate. As with all chemicals, KEEP AWAY FROM
CHILDREN AND ANIMALS. FOR PROFESSIONAL USE ONLY. The hazard
information contained herein is offered solely for the consideration
of the user, subject to his own investigation and verification of
compliance with applicable regulations, including the safe use of the
product under every foreseeable condition.
________________________________________________________________________________
|