Permatex, Inc.
10 Columbus Blvd.
Hartford, CT 06106 USA
Telephone: 1-87-Permatex
(877) 376-2839
Emergency: 800-255-3924
International Emergency: 813-348-0585
Material Safety Data Sheet
1. PRODUCT IDENTIFICATION
Product Name: 84115 PERMA POXY 5 MINUTE PLASTIC WELD PART 1 25ML SYR
Item No: PTX202009B
Product Type: Epoxy resin
2. COMPOSITION/INFORMATION ON INGREDIENTS
Ingredients Percent ACGIH 8 Hr. TWA: OSHA 8 Hr. TWA:
100 ppm TWA; 410 mg/m3 TWA 100 ppm TWA; 410 mg/m3 TWA
METHYL METHACRYLATE 40-75
80-62-6
20 ppm TWA; 70 mg/m3 TWA 20 ppm TWA; 70 mg/m3 TWA
METHACRYLIC ACID 1-10
79-41-4
__-DIMETHYLBENZYL 1-10 Not Listed Not Listed
HYDROPEROXIDE
80-15-9
P-TOLUENESULFONYL 1-10 Not Listed Not Listed
CHLORIDE
98-59-9
3. HAZARDS IDENTIFICATION
May cause eye and skin irritation. May cause skin sensitization. Exposure to vapors or mist may result
Toxicity:
in irritation of the respiratory tract.
Eye and skin contact, ingestion, inhalation.
Primary Routes of Entry:
Signs and Symptoms of Exposure: May cause skin irritation. Repeated skin contact may cause allergic skin reactions. Inhalation
overexposure may cause irritation, coughing and flu-like symptoms. Contact with eyes may cause
tearing and redness.
Ingredients Percent NTP: ACGIH IARC:
Carcinogens
METHYL METHACRYLATE 40-75 male rat-no evidence; A4 - Not Classifiable Group 3: Vol 60, pg 445,
80-62-6 female rat-no as a Human 1994
evidence; male mice- Carcinogen
no evidence; female
mice-no evidence
Medical Conditions Recognized as May aggrevate preexisting dermatitis. Persons with respiratory problems such as emphysema and
asthma should avoid inhalation.
Being Aggravated by Exposure:
4. FIRST AID MEASURES
If swallowed, DO NOT induce vomiting. Drink water or milk. Seek medical attention immediately.
Ingestion:
Move to fresh air in case of accidental inhalation of vapors. Oxygen or artificial respiration if needed.
Inhalation:
Obtain medical attention.
Wash off immediately with soap and plenty of water removing all contaminated clothes and shoes If
Skin Contact:
skin irritation persists, call a physician
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes and get medical
Eye Contact:
attention if irritation persists.
5. FIRE FIGHTING MEASURES
51 degrees F. Method: Tag Closed Cup
Flash Point (癋/C):
Dry chemical
Recommended Extinguishing Media:
Firefighters should wear self-contained breathing apparatus. Use water
Special Fire-Fighting Procedures:
spray to cool exposed containers.
Oxides of carbon. Oxides of nitrogen, Hydrogen cyanide Methylene
Hazardous Products Formed by Fire or Thermal
bisphenyl isocynate, cyclopentanone, tetrahydrofuran.
Decomposition:
Closed containers may rupture or explode when exposed to extreme
Unusual Fire/Explosion Hazards:
heat. Keep containers cool. Irritating or toxic gases or fumes may be
generated by thermal decomposition or combustion.
1 of 3
Product name: 84115 PERMA POXY 5 MINUTE Item PTX202009B
PLASTIC WELD PART 1 25ML SYR
2.1
Lower Explosive Limit:
12.5
Upper Explosive Limit:
6. ACCIDENTAL RELEASE MEASURES
Maintain good ventilation. Take up with an inert absorbent. Store in a closed waste container until
Spill Procedures:
disposal. Prevent from entering waterways or sewers.
7. HANDLING AND STORAGE
Store away from heat. Store in a cool, dry area.
Storage:
Avoid contact with vapors from heated material. Avoid contact with skin and eyes.
Handling:
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Safety glasses.
Eyes:
rubber or plastic gloves Wash contaminated clothing before re-use
Skin:
General; local exhaust ventilation as necessary to control any air contaminants to within their exposure
Ventilation:
limits during the use of this product.
An approved respirator (i.e. NIOSH, etc.) should be worn when exposures are expected to exceed the
Respiratory Protection:
applicable limits.
9. PHYSICAL AND CHEMICAL PROPERTIES
White liquid
Appearance:
pungent
Odor:
214 degrees F
Boiling Point (癋):
Does not apply
pH:
Slight
Solubility in Water:
0.94-1.0
Specific Gravity:
1.98% by weight (adhesive and activator mixed)
VOC Content(Wt.%):
29 mm Hg @ 20 degrees C.
Vapor Pressure:
Heavier than air
Vapor Density (Air=1):
Not Determined
Evaporation Rate:
10. STABILITY AND REACTIVITY
STABLE
Chemical Stability:
MAY OCCUR
Hazardous Polymerization:
Avoid contact with bases and strong oxidizers. Amines. Strong alkalies,
Incompatabilities:
strong mineral acids, reducing agents. Ultraviolet radiation.
Heat
Conditions to Avoid:
Oxides of carbon. Oxides of nitrogen, Hydrogen cyanide Methylene
Hazardous Products Formed by Fire or Thermal
bisphenyl isocynate, cyclopentanone, tetrahydrofuran.
Decomposition:
11. TOXICOLOGICAL INFORMATION
See Section 3
12. ECOLOGICAL INFORMATION
No data available
13. DISPOSAL CONSIDERATIONS
Recommended Method of Disposal: Disposal should be made in accordance with federal, state and local regulations.
D001 as per 40CFR 261.21
US EPA Waste Number:
14. TRANSPORTATION INFORMATION
DOT (49CFR 172)
Domestic Ground Transport
Consumer Commodity (not more than one liter)
DOT Shipping Name:
ORM-D
Hazard Class:
None
UN/ID Number:
None
Marine Pollutant:
IATA
2 of 3
Product name: 84115 PERMA POXY 5 MINUTE Item PTX202009B
PLASTIC WELD PART 1 25ML SYR
Consumer Commodity
Proper Shipping Name:
Class 9
Class or Division:
ID 8000
UN/NA Number:
IMDG
Adhesives, Limited Quantity
Proper Shipping:
Class 3.2
Hazard Class:
UN 1133
UN Number:
15. REGULATORY INFORMATION
SARA 313 Chemicals: The following component(s) is listed as a SARA Section 313 Toxic Chemical.
SARA 313 Information
METHYL METHACRYLATE, DIMETHYLBENZYL HYDROXIDE
CALIFORNIA PROP 65:
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other
reproductive harm.
TSCA Inventory Status:
Listed on Inventory: YES All components of this product are listed (or exempt) on the EPA TSCA inventory.
16. OTHER INFORMATION
HEALTH 2, FLAMMABILITY 3 , REACTIVITY 2
Estimated NFPA Rating:
HEALTH 2, FLAMMABILITY 3, PHYSICAL HAZARD 0
Estimated HMIS Classification:
NFPA is a registered trademark of the National Fire Protection Assn.
HMIS is a registered trademark of the National Paint and Coatings Assn.
Denise Boyd, Health and Safety Manager
Prepared By: Revision Date: 03/02/2004
Permatex. Inc. 10 Columbus Blvd. Hartford, CT USA 1
Company: Revision
06106 Number:
Telephone Number: 1-87-Permatex (877) 376-2839
3 of 3
Permatex, Inc.
10 Columbus Blvd.
Hartford, CT 06106 USA
Telephone: 1-87-Permatex
(877) 376-2839
Emergency: 800-255-3924
International Emergency: 813-348-0585
Material Safety Data Sheet
1. PRODUCT IDENTIFICATION
Product Name: 84115 PERMA POXY 5 MINUTE PLASTIC WELD PART 2 28ML SYR
Item No: PTX203012B
Product Type: Curing agent
2. COMPOSITION/INFORMATION ON INGREDIENTS
Ingredients Percent ACGIH 8 Hr. TWA: OSHA 8 Hr. TWA:
100 ppm TWA; 410 mg/m3 TWA 100 ppm TWA; 410 mg/m3 TWA
METHYL METHACRYLATE 40-75
80-62-6
AMINE CONDENSATE 1-10 Not Listed Not Listed
MIXTURE
3. HAZARDS IDENTIFICATION
May cause eye and skin irritation. May cause skin sensitization. Exposure to vapors or mist may result
Toxicity:
in irritation of the respiratory tract.
Eye and skin contact, ingestion, inhalation.
Primary Routes of Entry:
Signs and Symptoms of Exposure: May cause skin irritation. Repeated skin contact may cause allergic skin reactions. Inhalation
overexposure may cause irritation, coughing and flu-like symptoms. Contact with eyes may cause
tearing and redness.
Ingredients Percent NTP: ACGIH IARC:
Carcinogens
METHYL METHACRYLATE 40-75 male rat-no evidence; A4 - Not Classifiable Group 3: Vol 60, pg 445,
80-62-6 female rat-no as a Human 1994
evidence; male mice- Carcinogen
no evidence; female
mice-no evidence
Medical Conditions Recognized as May aggrevate preexisting dermatitis. Persons with respiratory problems such as emphysema and
asthma should avoid inhalation.
Being Aggravated by Exposure:
4. FIRST AID MEASURES
If swallowed, DO NOT induce vomiting. Drink water or milk. Seek medical attention immediately.
Ingestion:
Move to fresh air in case of accidental inhalation of vapors. Oxygen or artificial respiration if needed.
Inhalation:
Obtain medical attention.
Wash off immediately with soap and plenty of water removing all contaminated clothes and shoes If
Skin Contact:
skin irritation persists, call a physician
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes and get medical
Eye Contact:
attention if irritation persists.
5. FIRE FIGHTING MEASURES
51 degrees F. Method: Tag Closed Cup
Flash Point (癋/C):
Dry chemical
Recommended Extinguishing Media:
Firefighters should wear self-contained breathing apparatus. Use water
Special Fire-Fighting Procedures:
spray to cool exposed containers.
Oxides of carbon. Oxides of nitrogen, Hydrogen cyanide Methylene
Hazardous Products Formed by Fire or Thermal
bisphenyl isocynate, cyclopentanone, tetrahydrofuran.
Decomposition:
Closed containers may rupture or explode when exposed to extreme
Unusual Fire/Explosion Hazards:
heat. Keep containers cool. Irritating or toxic gases or fumes may be
generated by thermal decomposition or combustion.
2.1
Lower Explosive Limit:
12.5
Upper Explosive Limit:
1 of 3
Product name: 84115 PERMA POXY 5 MINUTE Item PTX203012B
PLASTIC WELD PART 2 28ML SYR
6. ACCIDENTAL RELEASE MEASURES
Maintain good ventilation. Take up with an inert absorbent. Store in a closed waste container until
Spill Procedures:
disposal. Prevent from entering waterways or sewers.
7. HANDLING AND STORAGE
Store away from heat. Store in a cool, dry area.
Storage:
Avoid contact with vapors from heated material. Avoid contact with skin and eyes.
Handling:
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Safety glasses.
Eyes:
rubber or plastic gloves Wash contaminated clothing before re-use
Skin:
General; local exhaust ventilation as necessary to control any air contaminants to within their exposure
Ventilation:
limits during the use of this product.
An approved respirator (i.e. NIOSH, etc.) should be worn when exposures are expected to exceed the
Respiratory Protection:
applicable limits.
9. PHYSICAL AND CHEMICAL PROPERTIES
White liquid
Appearance:
pungent
Odor:
214 degrees F
Boiling Point (癋):
Does not apply
pH:
Slight
Solubility in Water:
0.94-1.0
Specific Gravity:
1.98% by weight (adhesive and activator mixed)
VOC Content(Wt.%):
29 mm Hg @ 20 degrees C.
Vapor Pressure:
Heavier than air
Vapor Density (Air=1):
<1 (butyl acetate = 1)
Evaporation Rate:
10. STABILITY AND REACTIVITY
STABLE
Chemical Stability:
MAY OCCUR
Hazardous Polymerization:
Avoid contact with bases and strong oxidizers. Amines. Strong alkalies,
Incompatabilities:
strong mineral acids, reducing agents. Ultraviolet radiation.
Heat
Conditions to Avoid:
Oxides of carbon. Oxides of nitrogen, Hydrogen cyanide Methylene
Hazardous Products Formed by Fire or Thermal
bisphenyl isocynate, cyclopentanone, tetrahydrofuran.
Decomposition:
11. TOXICOLOGICAL INFORMATION
See Section 3
12. ECOLOGICAL INFORMATION
No data available
13. DISPOSAL CONSIDERATIONS
Recommended Method of Disposal: Disposal should be made in accordance with federal, state and local regulations.
D001 as per 40CFR 261.21
US EPA Waste Number:
14. TRANSPORTATION INFORMATION
DOT (49CFR 172)
Domestic Ground Transport
Consumer Commodity (not more than one liter)
DOT Shipping Name:
ORM-D
Hazard Class:
None
UN/ID Number:
None
Marine Pollutant:
IATA
Consumer Commodity
Proper Shipping Name:
Class 9
Class or Division:
ID 8000
UN/NA Number:
2 of 3
Product name: 84115 PERMA POXY 5 MINUTE Item PTX203012B
PLASTIC WELD PART 2 28ML SYR
IMDG
Adhesives, Limited Quantity
Proper Shipping:
Class 3.2
Hazard Class:
UN 1133
UN Number:
15. REGULATORY INFORMATION
SARA 313 Chemicals: The following component(s) is listed as a SARA Section 313 Toxic Chemical.
SARA 313 Information
METHYL METHACRYLATE
CALIFORNIA PROP 65:
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other
reproductive harm.
TSCA Inventory Status:
Listed on Inventory: YES All components of this product are listed (or exempt) on the EPA TSCA inventory.
16. OTHER INFORMATION
HEALTH 2, FLAMMABILITY 3 , REACTIVITY 2
Estimated NFPA Rating:
HEALTH 2, FLAMMABILITY 3, PHYSICAL HAZARD 0
Estimated HMIS Classification:
NFPA is a registered trademark of the National Fire Protection Assn.
HMIS is a registered trademark of the National Paint and Coatings Assn.
Denise Boyd, Health and Safety Manager
Prepared By: Revision Date: 03/02/2004
Permatex. Inc. 10 Columbus Blvd. Hartford, CT USA 1
Company: Revision
06106 Number:
Telephone Number: 1-87-Permatex (877) 376-2839
3 of 3
|