MATERIAL SAFETY DATA SHEET
350 RING ROAD ELIZABETHTOWN, KY 42701 (270) 769-5557 (270) 769-6418
ACTIVATOR FOR REAR VIEW MIRROR KIT
PART NO. 49401 - PART A
SECTION I - IDENTITY INFORMATION
Chemical Family : Accelerator/Primer
SECTION II - HAZARDOUS INGREDIENTS
CONCENTRATION
INGREDIENTS CAS # RANGES (%)
3,5-Diethyl-1,2-Dihydro-1Phenyl1-2-Propylpyridine 34562-31-7 >1
Isobornyl Methacrylate 7534-94-3 >1
SECTION III - PHYSICAL DATA
Boiling Point : Polymerized Before BP Attained.
Melting/Freezing Point : N/A
Solubility in Water : Insoluble
Specific Gravity (Water=1) : 0.980
Bulk Density : 8.16 lbs/gal
Volatiles : None
Evaporation Rate (Butyl Acetate) : N/A
Vapor Pressure (mmHg) : N/A
Vapor Density (Air=1) : N/A
Volatile Organic Compounds : Nil
Appearance and Odor : Yellow, Sweet Odor
Odor Threshold : Not Available
Molecular weight : N/A
PH As Is : N/A
pH In (1%) Solution : Not Tested
Partition Coefficient (n-octano 1/water) : N/A
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
Auto Ignition : Not available
: 2600F (TCT/TCT)
Flash Point (Method Used)
Extinguishing Media : Water fog, foam, C02, dry chemical.
Special Fire Fighting Procedures : Fire fighters should be equipped with self-
contained breathing apparatus to protect against
potentially toxic and irritating fumes. Cool
exposed equipment with water spray.
Pg. 2
P/N 49401 ?Part A
Fire and Explosion Hazards : Polymerization may take place at elevated
Temperatures. Combustion may release noxious
or toxic vapors. See reactivity.
Hazardous Combustion Products : Thermal decomposition could produce carbon
monoxide, carbon dioxide and unidentified
organic compounds.
Upper Explosion Limit (%) : N/A
Lower Explosion Limit (%) : N/A
NFPA Flammability Hazard Class : 0 = Significant
SECTION V - HEALTH HAZARD DATA
EYE IRRITANT. TOXIC IN CONTACT WITH SKIN. Sensitizer
ROUTE(S) OF ENTRY: : Skin contact, eye contact.
Eye : No hazard in normal industrial use. Irritating
and may injure eye tissue if not removed
promptly.
Skin Contact : Irritating to the skin. Moderate systemic tox-
icity through the skin.
Inhalation : Irritating to eyes and respiratory tract in high
concentrations.
Ingestion : Low order of toxicity.
Effects of Chronic Exposure : The toxicological properties of this product
have not been fully evaluated. Use of good in-
dustrial hygiene practices if required. Avoid
direct contact with skin or eyes. Do not ingest or
inhale.
Target Organs : Skin, kidneys, liver.
Carcinogen : No
Sensitizer : Yes
FIRST AID PROCEDURES:
Eye : This product is a solid. If in the eye, remove
as one would any foreign object. Flush eyes with
large amounts of water until irritation subsides.
If irritation persists, get medical attention.
Skin Contact : None required.
Inhalation : First aid is not normally required.
Ingestion : None required.
SECTION VI - REACTIVITY DATA
Stability : Unstable
NFPA Reactivity Hazard Class : 2 = Moderate
Hazardous Decomposition Products : Thermal decomposition could produce car-
bon monoxide, carbon dioxide and unidentified
organic compounds.
Pg. 3
P/N 49401 ?Part A
SECTION VII ?EXPOSURE CONTROLS
Ventilation Requirements : General
Eye Protection Requirements : Wear chemical goggles.
Glove Requirements : Impervious neoprene or rubber gloves are
recommended.
Clothing Requirements : Standard industrial hygiene procedures
should be practiced.
Respirator Requirements : No respiratory protection is recommended
while working with this material. However, if
operating conditions create high vapor or mist
concentrations, use of an approved respirator
is recommended.
SECTION VIII - ACCIDENTAL RELEASE MEASURES
Spill and Leak Procedures : Shut off ignition sources. Stop leak if you can
do it without risk. For small liquid spills, take up
with sand or other absorbent material. For larger
spills, dike far ahead of spill for later disposal.
No smoking, flames or flares in hazard area!
Keep unnecessary people away.
SECTION IX - HANDLING AND STORAGE
Storage Temperature : Room temperature
Handling/Storage : Confine as much as possible for salvage or
controlled disposal.
Ventilation Requirements : General
Sensitivity to Static Electricity : No
Sensitivity to Mechanical Impact : No
SECTION X ?DISPOSAL PROCEDURES
Waste disposal Methods : Waste disposal should be in accordance with
existing federal, state and local environmental
regulations.
Empty Container Warnings : Empty containers may contain product resi-
due; follow MSDS and label warnings even after
they have been emptied.
The Information Contained Herein is Based on Data Considered Accurate. However, No
Warranty is Expressed or Implied Regarding the Accuracy of the Data or the Results to be
obtained From the Use Thereof. Because the Information Contained herein may be applied
Under Conditions beyond Our Control, We Assume No Responsibility for its Use.
Rev. 2/10/03
Pg. 4
P/N 49401 ?Part B
REAR VIEW MIRROR ADHESIVE
PART NO. 49401 - PART B
SECTION I - PRODUCT INFORMATION
Chemical Family : Urethane/Methacrylate Blend
SECTION II - INGREDIENTS
INGREDIENTS CAS NO. RANGES (%)
2-Hydroxyethyl Methacrylate 868-77-9 >1
Aromatic Urethane Acrylate Resin Unknown >1
Methacrylic Acid 79-41-4 >1
Isobornyl Acrylate 5888-33-5 >1
Maleic Acid 110-16-7 >1
Cumene Hydroperoxide 80-15-9 >1
SECTION III - PHYSICAL DATA
Pure Substance or Mixture : Mixture
Physical Form : Liquid
Appearance/Odor : Amber, Acetic Odor
Odor Threshold : Not Available.
pH as is : N/A
pH in 1% Solution : N/A
Boiling Point : Polymerizes before BP Attained.
Melting/Freezing Point : N/A
Solubility in Water : Insoluble
Partition Coefficient (n-octano/Water) : N/A
Specific Gravity (Water=1) : 1.10
Bulk Density : 9.16 lbs./gal
Volatiles : Approx. 5%
Evaporation Rate (Butyl Acetate=1) : <1
0.01 at 750F
Vapor Pressure (mmHg) :
Vapor Density (Air=1) : 5.0
Volatile Organic Compounds : 0.46 lbs./gal (55 g/l)
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
Auto Ignition : Not determined
: 2180F (Setaflash Closed Tester)
Flash Point
Lower Explosive Limit (%) : N/A
Upper Explosive Limit (%) : N/A
Extinguishing Media : Dry chemical, C02, foam, and water fog.
Special Fire Fighting Procedures : Fire fighters should be equipped with self-
contained breathing apparatus to protect
against potentially toxic and irritating fumes.
cool exposed equipment with water spray.
Pg. 5
P/N 49401 ?Part B
Fire and Explosion Hazards : Polymerization may take place at elevated
temperatures. Combustion may release noxious
or toxic vapors. See reactivity.
Hazardous Combustion Products : Thermal decomposition could produce car-
bon monoxide, carbon dioxide and unidentified
organic compounds.
NFPA Flammability Hazard Class : 1 = Slight
SECTION V - HEALTH EFFECTS DATA
EYE IRRITANT. Sensitizer
ROUTE(S) OF ENTRY: : Skin contact, eye contact, ingestion.
Eye : Irritating, and may injure eye tissue if not
removed promptly.
Skin Contact : Frequent or prolonged contact may irritate
and cause dermatitis. May cause skin sensitiza-
tion, a partial or whole-body dermatitic rash
experienced after exposure, however minimal.
Inhalation : Based on its low volatility, product is not
considered to be a respiratory hazard under nor-
mal conditions of use. Irritating and/or toxic
vapors may be released at elevated temperatures.
Ingestion : Irritating to mouth, throat and stomach. May
cause gastric tract disorder and/or damage.
FIRST AID PROCEDURES:
Eye : Immediately flush eyes with large amounts of
water for at least 15 minutes, lifting upper and
lower lids. Get prompt medical attention.
Skin Contact : Flush exposed areas thoroughly with soap and
water until all chemical is removed. Remove
contaminated clothing and launder before re-use.
Inhalation : First aid is not normally required. Remove to
fresh air. If breathing has stopped, give artificial
respiration. Get medical attention.
Ingestion : DO NOT induce vomiting. If individual is
conscious, give milk or water to dilute stomach
contents. Keep warm and quiet. Get prompt
medical attention.
Effects of Chronic Exposure : The toxicological properties of this product
have not been fully evaluated. Use of good
industrial hygiene practices is required. Avoid
direct contact with skin or eyes. Do Not ingest
or inhale.
Target Organs : Skin, eyes, lungs and gastrointestinal.
Carcinogen : No
Sensitizer : Yes
Pg. 6
P/N 49401 ?Part B
SECTION VI - REACTIVITY DATA
Stability : Stable
NFPA Reactivity Hazard Class : 2 = Moderate
Hazardous Decomposition Products : Thermal decomposition could produce carbon
monoxide, carbon dioxide, and unidentified
organic compounds.
Hazard Polymerization Conditions : Heat, oxidizing/reducing agents, oxygen-free
atmosphere may cause hazardous polymerization
SECTION VII - EXPOSURE CONTROLS
Ventilation Requirements : General
Eye Protection Requirements : Safety glasses, goggles, or face shield to pro-
tect against splashing.
Glove Requirements : Employee must wear appropriate protective
gloves to prevent contact with this substance.
Clothing Requirements : No special clothing required for low volume
activity.
Respirator Requirements : None required under normal handling condi-
tions. Use NIOSH approved respirator if vapor
or mist levels are irritating.
SECTION VIII - ACCIDENTAL RELEASE MEASURES
Spill and Leak Procedures : Wear protective clothing. Stop leak if you can
do it without risk. For small spills take up with
sand or other inert absorbent material and place
in a container for later disposal. Note: in bulk
quantities, product absorbed on inert material
may polymerize generating significant heat and
pressure. vent disposal container to prevent build
up of pressure. Can carefully solidify with anae-
robic surface conditioner and dispose of as solid
waste.
SECTION IX - HANDLING AND STORAGE PRECAUTIONS
Storage Temperature : Room temperature
Handling/Storage : Store out of direct sunlight in a dry area.
maximum storage temperature is 1000F.
Ventilation Requirements : General
Sensitivity to Static Electricity : No
Sensitivity to Mechanical Impact : No
SECTION X - DISPOSAL CONSIDERATIONS
Waste Disposal Methods : Waste disposal should be in accordance with
existing federal, state and local environmental
regulations.
Pg. 7
P/N 49401 ?Part B
Empty Container Warnings : Empty containers may contain product resi-
due; follow MSDS and label warnings even
after they have been emptied.
The Information Contained Herein is Based on Data Considered Accurate. However, No
Warranty is Expressed or Implied Regarding the Accuracy of the Data or the Results to be
obtained From the Use Thereof. Because the Information Contained herein may be applied
Under Conditions beyond Our Control, We Assume No Responsibility for its Use.
Rev. 2/10/03
|