PRODUCT DATA SHEET
Mira Clean #1 www.miraclesealants.com
Deep Cleaning Action For Most Surfaces Including Water, Stain & Slip Protection
鈻? Sanded Grout 鈻? Non-sanded Grout 鈻? Quarry Tile To protect cleaned area from future soiling and staining and increase static
coefficient of friction, we recommend applying the appropriate Miracle
鈻? Clay Pavers 鈻? Limestone 鈻? Ceramic Tile
Penetrating Sealer/Impregnator.
鈻? Glazed Tile 鈻? Granite 鈻? Marble
鈻? Terrazzo 鈻? Brick 鈻? Slate
Color and Gloss Enhancement
鈻? Travertine 鈻? Concrete 鈻? Masonry
To enhance color and gloss use Mira Matte, Saltillo & Terra Cotta Paste &
Uses Liquid Wax, Mira Shine or Stone Polish as directed.
鈻? Interior & Exterior 鈻? Counters 鈻? Floors
Polish Enhancement
鈻? Walls 鈻? Showers 鈻? All Grout
Use Marble Conditioner, Mira Dust, Granite Brite, Mira Brite, Mira Pad and
Special Features Tile Brite as directed.
鈻? Biodegradable 鈻? Environmentally Safe
Anti-Slip/Increased Slip Resistance
鈻? Easy to Use 鈻? Cost Effective
For quarry tile, ceramic tile or porcelain tile floors that require additional slip
properties to increase static coefficient of friction, use Mira Skidd as direct-
PRODUCT DESCRIPTION
ed.
KEEP OUT OF REACH OF CHILDREN. Mira Clean #1 is an environmentally
Mold, Mildew and Bacteria Sanitation
safe, biodegradable, non acidic cleaner & degreaser developed specifically
for tile, grout, natural & cast stone and masonry surfaces. Mira Clean #1 For best results in killing mold, mildew, bacteria and other micro organisms,
will handle difficult stains, yet is gentle enough for everyday use. Mira use Miracle Disinfectant as directed.
Clean #1 is very effective as an ongoing maintenance cleaner for surfaces
Coverage
previously sealed with the appropriate Miracle Penetrating Sealer/
Coverage will vary depending on density, porosity, texture, surface absorp-
Impregnator. Mira Clean #1 will not harm the polish on polished stone sur-
tion, weather, time solution left on surface and application methods. Used
faces.
as directed, Mira Clean #1 will clean up to 10,000 square feet per gallon
Sample Testing (927 square meters per 3.785 litters).
Due to the differences of each material, several inconspicuous test patches
should be completed to assure maximum performance. User must deter- MAINTENANCE
mine suitability of the product for their intended use. For ongoing maintenance instructions please refer to Miracle Sealants Care
Guide. Refer to the Miracle Sealants Product Recommendation Chart for
Protect Neighboring Surfaces
specific product recommendations.
Always protect neighboring surfaces including wood, carpet, metal, land-
scaping and other non masonry surfaces. Storage
Store Mira Clean #1 in the original container properly sealed and unmixed.
A P P L I C AT I O N I N ST R U C T I O N S Stored at 770 F (400 C), Mira Clean #1 will have a shelf life of 12 months. Do
Read entire label and PDS before using. not allow to freeze.
Mira Clean #1 is concentrated and requires dilution. To remove difficult Technical Support
stains such as oil and grease, mix one part Mira Clean #1 with 3 parts hot For additional technical support, contact Miracle Sealants Company at
water (cold water can be used but cleaning action will be reduced). Apply 1-800-350-1901 or 626-443-6433 ext. 3013
Mira Clean #1 with a clean mop or self-feeding floor machine. Allow the
Office Hours
solution to stand for 10 minutes while agitating periodically with the appro-
priate scrub brush. DO NOT allow solution to dry on the surface. Extract all Monday - Friday from 8:30 am - 5:00 pm PT.
the dirty remains with a wet vacuum system. Rinse the surface thoroughly 1-626-443-6433 or 1-800-350-1901 鈥? Fax: 1-626-443-1435
with hot water and allow to dry. Difficult stains may require a second appli- website: www.miraclesealants.com
cation. If area is still dirty after the second cleaning use Liquid Poultice,
Product Damaged During Transportation
Precast Concrete Cleaner, Sulfamic Acid Crystals, Porcelain Cleaner,
If product is damaged during transportation contact
Quarry Kleen or GCFR (Grout & Concrete Film Remover) as directed.
Info Trac @ 1-800-535-5053
For general cleaning, mix one cup Mira Clean #1 with 3 gallons hot water
Additional Products
following the same instructions as before.
Miracle Sealants Company offers a complete line of water & stain repel-
Heavy Duty Cleaning: Use Pre-Cast Concrete Cleaner, GCFR, Quarry Kleen
lents, sealers, cleaner, polishing compounds, diamond abrasives, machin-
and Porcelain & Ceramic Tile Cleaner as directed.
ery and accessories for the tile, stone, concrete, metal, fabric and carpet
Surface Coating/Wax Removal professional or do-it yourself specialist.
To remove existing coatings and/or waxes, use Mira Strip or H2O Strip as Warranty
directed.
Instructions are a condensed guide and should not be considered com-
plete. In the event of failure, the only obligation of Miracle Sealants
Company shall be to replace such products proven to be defective. Before
using, user shall determine the suitability of the product for their intended
use. User assumes all risks and liability whatsoever in connection therein.
Neither seller nor manufacturer shall be liable for any injury or inability to
use this product.
Caution
Use only in well ventilated area. Open windows and use fans to circulate air.
Chemical resistant gloves should be worn at all times. Keep small children
and pets out of area until product or surface has thoroughly dried. Refer to
the MSDS for additional information.
03_2003
MATERIAL SAFETY DATA SHEET
Mira Clean #1 www.miraclesealants.com
Emergency and First Aid Procedures:
Osha鈥檚 Hazard Communication Standard
U.S. Department Of Labor Eyes: Flush with water for 15 minutes. If irritation persists, call a physician.
29 CFR 1910.1200 OMB No. 1218-0072
Skin: Wash off with soap and water.
Identity No: L0323012 Name: Mira Clean #1
Ingestion: Drink large amounts of water. Call physician.
Section 1
Inhalation: Remove to fresh air.
Manufacturers Name: Miracle Sealants Company
Address: 12318 Lower Azusa Road Section 7 - Precautions For Safe Handling And Use
Emergency Phone: 800-350-1901 Steps to be taken in case material is released or spilled: Soak up with
City: Arcadia inert, absorbent material. Scoop up and place in a proper waste disposal
State: CA container.
Phone: 626-443-6433
Waste disposal method: Dispose of in accordance with federal, state and
Date Prepared: 04-01-2003
local regulations.
Section 2 - Hazardous Ingredient/Identity Information
Precautions to be taken in handling and storing: Store in a cool, dry place,
Hazardous Components: None
out of direct sunlight. Do not freeze less than or equal to 320 F or heat
VOC: < 68 g/L
above 1100 F.
Note: Non-carcinogenic
Other precautions: KEEP OUT OF REACH OF CHILDREN. Follow directions on
Section 3 - Physical/Chemical Characteristics
the container for proper use of this product.
Boiling point: 鈮?2100 F Specific gravity: 1.015
Section 8 - Control Measures
Vapor pressure: Not tested Melting point: Not tested
Vapor density: Not tested Evaporation rate: Not tested Respiratory protection: Ventilate by opening all doors and windows. If
Solubility in water: 100% exposure above the TLV or PEL require a niosh approved respirator
equipped for the exposure or suitable respiratory protection per
Appearance and odor: Amber, bland odor
29 CFR 1910.134 is required.
Section 4 - Fire And Explosion Hazard Data
Ventilation:
Flash Point: None Flammable Limits: Not tested Local exhaust - If available Special - None
LEL: None UEL: None Mechanical - If available Other - None
PH: 6.5 鈥? 7.5 DOT#: None
Protective gloves: Plastic or rubber, chemical resistant.
NFPA hazard rating - H F R S (0-Least, 4-Extreme): 0 0 0 0 Eye protection: Tight fitting, splash proof safety glasses.
HMIS hazard rating - H F R (0-Least, 4-Extreme): 0 0 0 Other protective clothing or equipment: Chemical resistant clothing.
Extinguishing media: CO2, dry foam
Work hygienic practices: Wash hands thoroughly before handling food
Special fire fighting procedures: None
stuffs, liquids or tobacco products. Use common sense and care around
Unusual fire and explosion hazards: None
chemicals. Never mix this product with other chemicals. Consult your super-
Section 5 - Reactivity Data visor for all other hygienic and safety practices. All practices depend on
Stability: Stable your specific business. Directions for use normally found on label which will
Conditions to avoid: None dictate engineering and control measures.
Incompatible materials to avoid: None
Section 9 - Shipping & Regulatory Classification
Hazardous decomposition or byproducts: None
DOT Shipping Name: Please refer to the Bill of Lading receiving/documents
Hazardous polymerization: Will not occur
for up-to-date information.
Section 6 - Health Hazard Data
DOT Hazard Class:
Routes of Entry:
OSHA Hazard Class:
Inhalation - Possible
UN/NA Number:
Skin - Possible
EPA Hazard Waste:
Ingestion - Possible
CPSC Classification:
Health Hazards - Same as signs and symptoms of exposure.
Transportation Class: 55
OSHA Carcinogenicity - None; NTP - None; IARC Monographs - None
Toxic Substances Control Act (TSCA): This product and/or all the ingredi-
Note: All chemicals incorporated into this product are found on the TSCA ents contained in this product have been registered under the Toxic
inventory list. Substances Control Act.
Signs and Symptoms of Over Exposure: NOTE: Miracle Sealants believes the data set forth are accurate. Miracle
Eyes: Burning sensation Sealants makes no warranty with respects thereto and disclaims all liability
Skin: Not expected to be a problem or reliance thereon. Such data are offered solely for consideration, investi-
Ingestion: Nausea gation and verification. Also, the data set forth is for the concentrated fin-
Inhalation: Not expected to be a problem ished product. All lab samples are for experimental purposes only and used
at the customers discretion.
Medical conditions generally aggravated by exposure - Same as signs and
symptoms of over exposure.
03_2003
|