SAFETY DATA SHEET
Inertol Poxitar F Part A
Date of issue - 28/01/2002. IPXTFA
PRODUCT AND COMPANY IDENTIFICATION
Product Code IPXTFA
Product Name Inertol Poxitar F Part A
2-component chemical resistant coating for steel and concrete based
Product Description
on epoxy resin.
Sika Limited
Manufacturer/Supplier
Watchmead
Welwyn Garden City
Hertfordshire.
AL7 1BQ
tel. 01707 394444
Fax. 01707 329129
COMPOSITION/INFORMATION ON THE COMPONENTS
Preparation - Hazardous ingredients ( Europe )
Component Concentration Classification Risk Phrases
1) 6864-37-5 2.50%-10.00% T, C, N R22, ., R23/24, .,
2,2'-Dimethyl-4,4'-Methylenebis(cyclohexylamine) R35, ., R51/53
2) (Z)-N-9-Octadecenylpropan-1,3-diamine 7173-62-8 1.00%-2.50% C, N R34, R22, R50
3) Biphenyl-2-ol 90-43-7 2.50% - 10.00% Xi, N R36/37/38, R50/53
4) Solvent Naptha (Petroleum),Light Aromatic. 64742-95-6 2.50% - 10.00% Xn, N R10, R37, R51/53,
R65, R66, R67
HAZARD IDENTIFICATION
Harmful by inhalation and in contact with skin.
Main Hazards
Causes burns.
Toxic to aquatic organisms, may cause long-term adverse effects in the
aquatic environment.
FIRST AID MEASURES
Immediately flood the eye with plenty of water for at least 15 minutes,
Eye Contact
holding the eye open.
Obtain medical attention urgently.
Wipe off as much as possible with a clean dry cloth. Wash skin
Skin Contact
thoroughly with soap and water.
Solvents should not be used to clean skin because they may increase
the penetration of the material.
Do not induce vomiting.
Ingestion
Wash out mouth with water. Obtain medical attention urgently.
Remove from exposure. In cases of possible respiratory irritation or if
Inhalation
feeling unwell in cases of prolonged exposure,obtain medical attention.
FIRE FIGHTING MEASURES
Not readily combustible.
Extinguishing Media
Use foam, dry chemical or carbon dioxide.
Do not use water jet.
Extinguishing Media - Not suitable
Combustion will produce smoke,carbon dioxide and carbon monoxide.
Special Hazards of Product
Wear full protective clothing and self-contained breathing apparatus.
Protective Equipment for Fire-Fighting
CM Version - 2 Page: 1/4
SAFETY DATA SHEET
Inertol Poxitar F Part A
Date of issue - 28/01/2002. IPXTFA
ACCIDENTAL RELEASE MEASURES
Wear appropriate protective clothing.
Personal Precautions
Try to prevent the material from entering drains or water courses.
Environmental Precautions and
Clean-up Methods
Contain and absorb using earth, sand or other inert material.
Spillages
Transfer into suitable containers for recovery or disposal.
HANDLING AND STORAGE
Use in well ventilated area.
Handling
Avoid contact with eyes, skin and clothing.
Storage area should be: cool. dry.
Storage
Storage temperature should be controlled to between 5 and 25 掳C.
Store in the original container securely closed . Keep away from
foodstuffs
EXPOSURE CONTROLS/PERSONAL PROTECTION
None assigned
Occupational Exposure Standards
Use of the basic principles of Industrial Hygiene will enable this
Engineering Control Measures
material to be used safely.
Respiratory protection if there is a risk of exposure to high vapour
Respiratory Protection
concentrations.
Wear suitable impervious gloves. (nitrile/butyl rubber)
Hand Protection
Chemical goggles.
Eye Protection
PHYSICAL AND CHEMICAL PROPERTIES
Viscous liquid.
Physical State
Various
Color
Faint. Characteristic.
Odor
Not applicable.
pH
66
Flash Point 掳C
Not determined.
Explosion Limits ( % )
Insoluble.
Solubility - Water
Approx. 2050 at 20 掳C.
Density (kg/m3)
Viscous liquid at ambient temperatures.
Viscosity ( at 20掳C )
STABILITY AND REACTIVITY
Stable under normal conditions.
Stability
Sources of ignition. High temperatures.
Conditions to avoid
Heating may produce: oxides of carbon acrid smoke and irritating
Hazardous Decomposition Products
fumes.
CM Version - 2 Page: 2/4
SAFETY DATA SHEET
Inertol Poxitar F Part A
Date of issue - 28/01/2002. IPXTFA
TOXICOLOGICAL INFORMATION
This material is corrosive to the eye.
Eye irritation
This material is corrosive to the skin.
Skin irritation
ECOLOGICAL INFORMATION
The product is insoluble in water.
Mobility
The product is expected to be not readily biodegradable.
Persistence/degradability
The product may be harmful to aquatic organisms.
Ecotoxicity
DISPOSAL
Dispose of as Special Waste.
Product Disposal
Arrange for disposal via a licensed waste contractor.
Empty containers may contain hazardous residues.
Container Disposal
Dispose of containers with care.
Empty packaging should be removed by a licensed waste contractor.
TRANSPORT INFORMATION
1760
UN : UN number
Corrosive liquid, n.o.s.
UN : Proper shipping name
8
UN : Class
3
UN : Packing Group
1760
ADR/RID :
Substance Identification
Number
Corrosive Liquid, N.O.S.
ADR/RID :
Proper shipping name
contains 2,2'-Dimethyl-4,4'-methylenbis(cyclohexylamine)
8
ADR/RID :
Class
66(c)
ADR/RID :
Item Number
80
ADR/RID :
Hazard Identification Number
Corrosive liquid, N.O.S.
IMDG : Proper shipping name
3
IMDG : Packing Group
8
IMDG : Class
8-15
IMDG : Ems Number
8147
IMDG : MFAG Number
3
IATA : Packing Group
8
IATA : Class
REGULATORY INFORMATION
Corrosive, Dangerous for the environment
Label Requirements
Causes burns.
Risk Phrases
Harmful by inhalation and in contact with skin.
Toxic to aquatic organisms, may cause long-term adverse effects in the
aquatic environment.
CM Version - 2 Page: 3/4
SAFETY DATA SHEET
Inertol Poxitar F Part A
Date of issue - 28/01/2002. IPXTFA
Do not breathe gas/fumes/vapour/spray.
Safety Phrases
In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
Wear suitable protective clothing, gloves and eye/face protection.
In case of insufficient ventilation, wear suitable respiratory equipment.
Use only in well ventilated areas.
If swallowed seek medical advice immediately and show this container
or label.
OTHER INFORMATION
29.06.1995
First Issue Date
Composition/Information on the Components
Revisions Highlighted
Main Hazards
Regulatory Information
Customers are urged to ensure that the product is entirely suitable for
Uses and Restrictions
their own purpose.It is the customer`s responsibilty to ensure that a
suitable and sufficient assessment of the risks created by the use of
the product is undertaken.
Health and Safety at Work etc Act, 1974, and relevant Statutory
UK Legislation
Provisions.
SI 1999/437: The Control of Substances Hazardous to Health
Regulations
SI 1993/1746: Chemicals (Hazard Information and Packaging)
Regulations, 1993.
SI No. 972/1996: The Special Waste Regulations 1996
SI No 2839 1991 Environmental Protection (Duty of Care) Regulations.
General Approved Code of Practice to COSHH Regulations, HSE.
UK Guidance Publications
EH40, Occupational Exposure Limits, HSE. Revised Annually.
The information contained in this SDS corresponds to our level of
Footnote
knowledge at the time of publication. All warranties are excluded. Our
most current General Sales Conditions shall apply. Please consult the
Technical Data Sheet prior to use.
SAFETY DATA SHEET
Inertol Poxitar F Part B
Date of issue - 28/01/2002. IPXTFB
PRODUCT AND COMPANY IDENTIFICATION
Product Code IPXTFB
Product Name Inertol Poxitar F Part B
2-component chemical resistant coating for steel and concrete based
Product Description
on epoxy resin.
Sika Limited
Manufacturer/Supplier
Watchmead
Welwyn Garden City
Hertfordshire.
AL7 1BQ
tel. 01707 394444
Fax. 01707 329129
COMPOSITION/INFORMATION ON THE COMPONENTS
Preparation - Hazardous ingredients ( Europe )
Component Concentration Classification Risk Phrases
1) Epoxy resin ( No.Av. mol.wt. < 700) 25068-38-6 50.00% - 10.00% Xi, N R36/38, R43, R51/53
2) Ethylbenzene 100-41-4 2.50% - 10.00% F, Xn R11, R20
3) Xylene 1330-20-7 2.50% - 10.00% Xn R10, R20/21, R38
HAZARD IDENTIFICATION
Flammable.
Main Hazards
Irritating to eyes and skin.
May cause sensitisation by skin contact.
Toxic to aquatic organisms, may cause long-term adverse effects in
the aquatic environment.
FIRST AID MEASURES
Immediately flood the eye with plenty of water for at least 10 minutes,
Eye Contact
holding the eye open.
Obtain medical attention urgently.
Wash skin thoroughly with soap and water. Solvents should not be
Skin Contact
used to clean skin because they may increase the penetration of the
material.
If material proves difficult to remove, use suitable skin cleanser (not
solvent).
Contaminated clothing should be washed or dry-cleaned before re-use.
Do not induce vomiting.
Ingestion
Obtain medical attention.
In cases of possible respiratory irritation or if feeling unwell in cases of
Inhalation
prolonged exposure,obtain medical attention.
FIRE FIGHTING MEASURES
Use foam, dry chemical or carbon dioxide.
Extinguishing Media
Dry sand may be used on small fires.
Do not use water jet.
Extinguishing Media - Not suitable
Combustion will produce smoke,carbon dioxide and carbon monoxide.
Special Hazards of Product
Wear full protective clothing and self-contained breathing apparatus.
Protective Equipment for Fire-Fighting
CM Version - 2 Page: 1/4
SAFETY DATA SHEET
Inertol Poxitar F Part B
Date of issue - 28/01/2002. IPXTFB
ACCIDENTAL RELEASE MEASURES
Wear appropriate protective clothing. Eliminate all sources of ignition.
Personal Precautions
Ventilate area to dispel any residual vapours.
Try to prevent the material from entering drains or water courses.
Environmental Precautions and
Clean-up Methods
Contain and absorb using earth, sand or other inert material.
Spillages
Transfer into suitable containers for recovery or disposal.
HANDLING AND STORAGE
Exposure by inhalation or skin contact should be minimised by good
Handling
Industrial Hygenie practices.
Use in well ventilated area. Avoid inhaling vapour.
Avoid contact with eyes, skin and clothing.
Storage area should be: cool. dry. well ventilated. out of direct sunlight.
Storage
Store away from sources of heat or ignition.
EXPOSURE CONTROLS/PERSONAL PROTECTION
Occupational Exposure Limits - GB
1) Ethyl benzene UK EH40: OES 100ppm (435mg/m3) 8h TWA.
UK EH40: OES 125ppm (545mg/m3) 15min STEL
2) Xylene UK EH40: OES 100ppm (435mg/m3) 8h TWA.
UK EH40: OES 150ppm (650mg/m3) 15min STEL
Use of the basic principles of Industrial Hygiene will enable this
Engineering Control Measures
material to be used safely.
Adequate ventilation should be provided to maintain solvent
Respiratory Protection
concentrations in the workplace below exposure limits.
Respiratory protection if there is a risk of exposure to high vapour
concentrations.
Wear suitable impervious gloves. (nitrile/butyl rubber)
Hand Protection
Chemical goggles.
Eye Protection
PHYSICAL AND CHEMICAL PROPERTIES
Liquid.
Physical State
Light - Yellow.
Color
Aromatic.
Odor
Not applicable.
pH
Approx. 23
Flash Point 掳C
Immiscible.
Solubility - Water
Approx. 1100 at 20 掳C.
Density (kg/m3)
Mobile liquid at ambient temperatures.
Viscosity ( at 20掳C )
STABILITY AND REACTIVITY
Stable under normal conditions.
Stability
Contains volatile solvent.
Extremes of temperature.
Conditions to avoid
Sources of ignition.
Combustion will generate: oxides of carbon. acrid smoke and irritating
Hazardous Decomposition Products
fumes.
CM Version - 2 Page: 2/4
SAFETY DATA SHEET
Inertol Poxitar F Part B
Date of issue - 28/01/2002. IPXTFB
TOXICOLOGICAL INFORMATION
Low order of acute toxicity.
Acute toxicity
Excessive exposure may produce anaesthetic or narcotic effects.
Liquid and vapour can cause irritation on contact and at high
Eye irritation
concentrations.
Frequent skin contact may cause irritation and defatting due to the
Skin irritation
solvent content.
The low molecular weight epoxy resin is a potential skin sensitiser.
Sensitization - Skin
ECOLOGICAL INFORMATION
The product is insoluble in water.
Mobility
The product is expected to be not readily biodegradable.
Persistence/degradability
The product is expected to be moderately toxic to aquatic species.
Ecotoxicity
DISPOSAL
Dispose of as Special Waste.
Product Disposal
Arrange for disposal via a licensed waste contractor.
Dispose of containers with care.
Container Disposal
Empty containers may contain hazardous residues.
Empty packaging should be removed by a licensed waste contractor.
TRANSPORT INFORMATION
1263
UN : UN number
Paint
UN : Proper shipping name
3.3
UN : Class
3
UN : Packing Group
1263
ADR/RID :
Substance Identification
Number
Paints - flash point between 21掳C and 55掳C.
ADR/RID :
Proper shipping name
3
ADR/RID :
Class
31(c)
ADR/RID :
Item Number
30
ADR/RID :
Hazard Identification Number
Paint.
IMDG : Proper shipping name
3
IMDG : Packing Group
3.3
IMDG : Class
3-05
IMDG : Ems Number
310 313
IMDG : MFAG Number
Paint.
IATA : Proper shipping name
3
IATA : Packing Group
3
IATA : Class
CM Version - 2 Page: 3/4
SAFETY DATA SHEET
Inertol Poxitar F Part B
Date of issue - 28/01/2002. IPXTFB
REGULATORY INFORMATION
Irritant, Dangerous for the environment
Label Requirements
Flammable.
Risk Phrases
Irritating to eyes and skin.
May cause sensitisation by skin contact.
Toxic to aquatic organisms, may cause long-term adverse effects in the
aquatic environment.
Avoid contact with skin.
Safety Phrases
Wear suitable gloves.
Use only in well-ventilated areas.
Contains epoxy constituents. See information supplied by the
manufacturer.
OTHER INFORMATION
29.06.1995
First Issue Date
Composition/Information on the Components
Revisions Highlighted
Main Hazards
Regulatory information
Customers are urged to ensure that the product is entirely suitable for
Uses and Restrictions
their own purpose.It is the customer`s responsibilty to ensure that a
suitable and sufficient assessment of the risks created by the use of
the product is undertaken.
Health and Safety at Work etc Act, 1974, and relevant Statutory
UK Legislation
Provisions.
SI 1999/437: The Control of Substances Hazardous to Health
Regulations
SI 1993/1746: Chemicals (Hazard Information and Packaging)
Regulations, 1993.
SI No. 972/1996: The Special Waste Regulations 1996
SI No 2839 1991 Environmental Protection (Duty of Care) Regulations.
General Approved Code of Practice to COSHH Regulations, HSE.
UK Guidance Publications
EH40, Occupational Exposure Limits, HSE. Revised Annually.
HS(G) 53, Respiratory Protective Equipment - a Practical Guide for
Users, HSE.
The information contained in this SDS corresponds to our level of
Footnote
knowledge at the time of publication.All warranties are excluded.Our
most current General Sales Conditions shall apply. Please consult the
Technical Data Sheet prior to use.
|