When Quality Matters
When Time Matters
Firescoff Step by Step
When Safety Matters
Gently heat jewelry to around 250oF (120oC).
Tip: Gage the temperature by placing a drop of
Firescoff
water on the metal surface. Apply heat until the
water boils off completely, then Firescoff.
1
Spray Firescoff so that a fine mist covers the
庐
entire piece. When applied correctly, Firescoff
Ceramic Flux Spray
will form a uniform white powder coating
instantly on contact.
2
The Firescoff Advantage
Gently reheat coated jewelry. Apply more
Firescoff if a reflection from the metal or any
鈥? Industry leading firescale protection
gemstones is visible.
鈥? Flawless void-free welds
Tip: For faster solder flow, apply more Firescoff.
3
鈥? Consistent, predictable solder flow
鈥? Multiple soldering w/ single application
Because Firescoff is also a flux, no other paste
or liquid flux is required. 鈥? 60% reduction in prep time
Tip: When using paste solder, apply paste 鈥? Maintains original metal color & patina
solder first, then Firescoff.
4 鈥? Fluoride Free (safe for corundum)
鈥? Non Toxic, No Outgassing (Refer to MSDS)
Remove Firescoff coating after soldering easily
鈥? No Flux & No Pickle required
using just warm water, or ultrasonic bath. No
acid pickle is required. 鈥? Easy warm water clean-up
鈥? High polish weld finish w/Laser
5
鈥? MJSA Award Winning Results!
Award winning performance 鈥? Toll-free 1-800 Technical Support
Award winning convenience
Award winning safety
Award winning results!
Award Winning Flux
Award Winning Firescale Preventer
Manufactured by:
Distributed
Award Winning Heat Shield
Award Winning Results
TM
i nno vat i ve solut ion s
Nventa Inc. Scottsdale, AZ USA
1.800.535.4980; +1.480.922.9383
Made in the USA Firescoff is a registered trademark of Nventa Incorporated
www.Firescoff.com
Firescoff庐 MSDS (Continued) Page 2 of 2
MATERIAL SAFETY DATA SHEET
MSDS #: 896223-10008-1 r4 Issue Date: 07/01/2007 SECTION V 鈥? FIRE FIGHTING INFORMATION
Extinguishing Media: Substance is noncombustible. Use any fire-fighting agent appropriate for surrounding material.
SECTION I 鈥? CHEMICAL PRODUCT Explosive Limits: LEL: N/A UEL: N/A
Flash Point (Method Used): N/A
Identity: Firescoff庐 Ceramic Flux, Firecoat/Firescale Preventer, Heat Shield Special Fire Fighting Procedures: None Unusual Fire Hazards: None
Brand: Firescoff庐 Stability: Stable Conditions to Avoid: None known Incompatibility: Strong oxidizers
Hazardous Polymerization: Will not occur Conditions to Avoid: None known
Health:
Hazard Rating: 1 4=Extreme, 3=High, 2=Moderate, 1=Slight, 0=Minimal SECTION VI 鈥? ACCIDENTAL RELEASE MEASURES
Flammability: 0 Personal Precautions: None
Reactivity: 0 Environmental Precautions: DISPOSAL IS TO BE PERFORMED IN COMPLIANCE WITH ALL REGULATIONS. Solutions may be allowed to
be flushed down sewer. First check with your local water treatment plant. Please do not landfill.
Emergency Telephone Number: 1-800-535-4980 National Emergency Poison Control Hotline: 1-800-222-1222
Steps To Be Taken in Case Material is Released or Spilled: Sorbents may be used. Read 鈥淒isposal Considerations鈥? below for further information.
Or call Local Poison Control Center or your physician
SECTION VII 鈥? HANDLING AND STORAGE
Precautions To Be Taken in Handling and Storage: Avoid low temperature. Shelf Life: 2 years
Storage Temperature: Recommended 72 to 120o F (25o to 49o C)
o
SECTION II 鈥? COMPOSITION AND Other Precautions: Store in closed container.
INGREDIENTS
Add a Little Firescoff SECTION VIII 鈥? EXPOSURE CONTROLS, PERSONAL PROTECTION
Ingredients/Chemical Name (May contain one or
Respiratory Protection (Specify Type): None required with normal use.
more of the following): Water, antioxidant(s), ceramic
庐 Local Exhaust: None required with normal use. Special: None
Ventilation
matrix compound(s), non-metalic oxides, dissolution
Mechanical (General): Normal/general dilution ventilation is acceptable. Other: None
dispensing aid(s), cleaning agent(s), stabilizing agent(s)
Hold the Pickle Eye Protection: None required with normal use.
Industrial Setting: For splash and liquid vapor protection, use chemical goggles. Eye wash fountain is desirable.
Protective Gloves: None required with normal use.
Potentially Hazardous Ingredients as defined by
Industrial Setting: Protective gloves (nitrile, rubber, neoprene) should be used for prolonged direct contact.
OSHA, 29 CFR 1910.1200(g):
Other Protective Equipment: None required with normal use. Industrial Setting: Avoid confined space entry without supplemental breathing air.
CAS NIOSH
SECTION IX 鈥? PHYSICAL AND CHEMICAL PROPERTIES
7764-38-2 1 mg/m3 TWA
Boiling Point oF: N/A Specific Gravity (H2O = 1): ca. 1.1
Appearance and Odor:
Vapor Pressure (mm Hg): N/A Clear liquid / white ceramic powder coating. Freezing Point: N/A
Vapor Density (Air=1): N/A pH (100% solution): > 7 (basic)
SECTION III 鈥? HAZARDS IDENTIFICATION
Evaporation Rate (nBuOAc=1): N//K Solubility in Water: Completely
Health Hazards (Acute and Chronic):
Inhalation: Aerosol mist may cause slight irritation SECTION X 鈥? STABILITY AND REACTIVITY
Introducing Firescoff - A revolutionary spray ceramic
to upper respiratory tract. Chemical Stability: Stable under normal conditions. Rapid crystallization with heating. Absorbs oxygen and carbon dioxide from the air.
Ingestion: May cause gastrointestinal irritation Possible Hazardous Reactions/Conditions: In very rare cases, may react with strong oxidizers, metal hydrides, or alkali metals generating hydrogen
coating that prevents scale, acts as a flux, and comes
and electrolytic imbalance.
gas, which could create an explosion hazard.
Eye Contact: May cause eye irritation. off with just warm water. Lose the pickle, and enjoy. Materials / Conditions to Avoid: Strong oxidizers
Skin: May cause minor skin irritation.
Hazardous Decomposition Products: May include inorganic metal and non-metal oxides.
SECTION XI 鈥? TOXICOLOGICAL INFORMATION
Signs and Symptoms of Exposure:
1 Start by gently heating jewelry to ~250oF (~120oC) Water based ceramic fluxes have a low order of toxicity.
Inhalation: May result in nausea, headache, and/or
Tip: Gage the temperature by placing a drop of water
respiratory tract irritation. SECTION XII 鈥? ECOLOGICAL INFORMATION
on the metal surface. Apply heat until the water boils
Ingestion: May result in nausea, vomiting, In large quantity at high concentration, soluble ceramic compounds may cause damage to trees or vegetation by root absorption.
off, then apply Firescoff.
abdominal pain, and/or diarrhea.
SECTION XIII 鈥? DISPOSAL CONSIDERATIONS
Eye Contact: May cause stinging, burning, tearing,
Chemical waste generators must determine whether a discarded chemical is classified as hazardous waste. US EPA guidelines for the classification
itching, swelling, and/or redness. 2 Spray Firescoff so that a fine mist evenly coats the
Skin: determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous waste regulations to ensure
May cause minor itching, stinging, entire piece. With proper heat, the Firescoff coating will
and/or redness. complete and accurate classification.
instantly turn white. For best results, apply Firescoff
SECTION XIV 鈥? TRANSPORT INFORMATION
holding the spray bottle ~8 inches from jewelry.
Firescoff庐 contains no alcohol and is non-hazardous under DOT. This material approved for shipment via commerical passenger air-freight.
SECTION IV 鈥? FIRST AID INFORMATION 3 Gently reheat the coated jewelry. Apply additional
SECTION XV 鈥? ADDITIONAL REGULATORY INFORMATION
Emergency and First Aid Procedures: Firescoff where a reflection from the metal or any
All components are listed on the US TSCA Inventory. No components are affected by Significant New Use Rules (SNURs) under TSCA搂5.
Inhalation: Remove person to fresh air. Seek gemstones is still visible.
No components of Firescoff庐 are subject to California Proposition 65 labeling.
medical attention if symptoms persist Tip: For faster solder flow, apply more Firescoff.
This material does not contain any hazardous air pollutants.
Ingestion: Never give anything by mouth to an
This material does not contain any Class 1 Ozone depletors. This material does not contain any Class 2 Ozone depletors.
unconscious person. Do not induce
4 Because Firescoff is also a flux, not other paste flux is
vomiting. Drink 2 鈥? 4 glasses of milk SECTION XVI 鈥? ECOLOGICAL INFORMATION
necessary.
or water. Seek medical attention. * N/A 鈥? Not Applicable * N/K 鈥? Not Known
Tip: When using paste solder, apply paste solder first
Eye Contact: Flush thoroughly with water for 15
then Firescoff. The submission of this MSDS may be required by law, but this is not an assertion that the substance is hazardous when used in accordance with proper
minutes. Forcibly hold eyelids apart
safety practices and normal handling procedures. Data supplied is for use only in connection with occupational safety and healt .
h
to ensure complete irrigation of eye
5 Remove Firescoff without the need of a pickle solution
tissue. Seek immediate medical
attention. by using only warm water or ultrasonic bath. The information contained herein has been compiled from sources considered by Nventa Incorporated to be dependable and is accur to the best of
ate
Skin: Rinse skin with water. If spilled on the Company鈥檚 knowledge. The information relates to the specific material designated herein, and does not relate to the use in combination with any
clothing, change clothes. Seek Questions? Call our tech line at 1-800-535-4980. other material or any other process. Nventa Incorporated assumed no responsibility for injury to the recipient or third persons, for any damage to any
medical attention if symptoms
property resulting from misuse of the controlled product.
persist. Made in the USA. Nventa Incorporated, Scottsdale Arizona, www.Firescoff.com
Nventa Incorporated 1-800-535-4980 Nventa Incorporated 1-800-535-4980
|