Material Safety Data Sheet
Revision Issued: 9/20/2006 Supercedes: 6/20/2000 First Issued: 2/03/99
Section I - Chemical Product And Company Identification
Product Name: Desert Brand CMFPS-Clear
CAS Number: N/A HBCC MSDS No. CD04501
1675 No. Main Street, Orange, California 92867
Telephone No: 714-998-8800 | Outside Calif: 800-821-7234 | Chemtrec: 800-424-9300
Section II - Composition/Information On Ingredients
Exposure Limits (TWAs) in Air
Chemical Name CAS Number ACGIH TLV OSHA PEL STEL
Dipropylene glycol methyl ether 34590-94-8 N/E N/E N/E
Ethylene Glycol 107-21-1 100 ppm 100 ppm 150 ppm
Ethylene Glycol Monobutyl Ether 11-76-2 100 mg/m3 100 mg/m3 N/E
2-Butoxyethanol Phosphate 78-51-3 N/E N/E N/E
Acrylic Copolymer Proprietary N/E N/E N/E
Section III - Hazard Identification
Routes of Exposure: Inhalation, ingestion, skin absorption
Summary of Acute Health Hazards
Ingestion: N/A
Inhalation: N/A
Skin: May cause skin irritation
Eyes: May be irritating to the eyes
Summary of Chronic Health Hazards: N/A
Signs and Symptoms of Exposure: N/A
Effects of Overexposure: N/A
Medical Conditions Generally Aggravated by Exposure: Any respiratory or skin
condition.
Note to Physicians: N/A
Product Name: Desert Brand CMFPS-Clear 1 of 4
Section IV - First Aid Measures
Ingestion: Do not induce vomiting. Consult physician immediately.
Inhalation: N/A
Skin: Wash affected areas with soap and water. Consult physician if irritation persists.
Eyes: : Flush immediately with large amount of water for 15 minutes. Take to physician
for medical treatment.
Section V - Fire Fighting Measures
Flash Point: Non flammable Autoignition Temperature: N/A
Lower Explosive Limit: N/A Upper Explosive Limit: N/A
Unusual Fire and Explosion Hazards: N/A
Extinguishing Media: Carbon dioxide, dry chemical, foam, and/or water fog.
Special Firefighting Procedures: Fire fighter must wear self contained breathing
apparatus or air masks. Containers exposed to fire may burst due to steam buildup so
should be kept cool with water spray.
Section VI - Accidental Release Measures
Use absorbent material such as sand or sawdust to pick up excess, dispose of per local
regulations. Dried material may be removed with acetone.
Section VII - Handling and Storage
Keep containers closed when not in use. Do not store above 120掳F. Keep from freezing.
Empty containers may contain product residue. All label warnings must be observed until
container has been cleaned, reconditioned or properly disposed of.
Section VIII - Exposure Controls/Personal Protection
Respiratory Protection: Unless air monitoring demonstrates vapor/mist levels above
applicable limits, no respirator is required. If respirator is required, the appropriate,
properly fitted respirator (NIOSH/MSHA approved) should be worn during application.
Follow respirator manufacturers directions for respirator use.
Ventilation: Required when spraying or applying in confined area
Protective Clothing: Usual hand protection for handling resin products
Eye Protection: Safety glasses
Other Protective Clothing or Equipment: Usual clothing for handling resin products
Work/Hygienic Practices: Wash hands thoroughly with soap and water before eating,
drinking, smoking, or using toilet facilities.
Section IX - Physical and Chemical Properties
Physical State: Liquid pH: 8+
Melting Point/Range: N/A Boiling Point/Range: 212潞F
Appearance/Color/Odor: Clear, slight acrylic odor.
Solubility in Water: Miscible Vapor Pressure(mmHg): N/A
Specific Gravity(Water=1): 1.029-1.04 Molecular Weight: N/A
Product Name: Desert Brand CMFPS-Clear 2 of 4
Vapor Density(Air=1): N/A % Volatiles: 74.3% by volume
How to detect this compound : N/A VOC: < 100g/L; 0.83 lbs./gal.
Section X - Stability and Reactivity
Hazardous Polymerization: Will not
Stability: Stable
occur
Conditions to Avoid: Freezing; Excessive Materials to Avoid: Avoid strong
heat oxidizers.
Hazardous Decomposition Products: Oxides of Carbon
Section XI - Toxicological Information
N/A
Section XII - Ecological Information
N/A
Section XIII - Disposal Considerations
Dispose in chemical disposal area or in a manner that complies with local, state, and
federal regulations. Do not incinerate closed containers.
Section XIV - Transport Information
DOT Proper Shipping Name: Paint
DOT Hazard Class/ I.D. No.: 3, UN1263, II
Section XV - Regulatory Information
Reportable Quantity: N/A
NFPA Rating: Health - 1; Fire - 0; Reactivity - 0
0=Insignificant 1=Slight 2=Moderate 3=High 4=Extreme
Carcinogenicity Lists: No NTP: No IARC Monograph: No OSHA Regulated: Yes
Ethylene Glycol : CAS 107-21-1 SARA Toxic Release Chemical (Section 313)鈥? Conc
1.0% , Standard Threshold , CERCLA RQ 5000 lb , TSCA
111-76-2 , TSCA , 78-51-3 , TSCA, 34590-94-8, TSCA
Section XVI - Other Information
Synonyms/Common Names: Latex Clear Sealer
Chemical Family/Type: Acrylic
Section changed since last revision: I, II, V, VI, VII, IX, X, XV, XVI
IMPORTANT! Read this MSDS before use or disposal of this product. Pass along the
information to employees and any other persons who could be exposed to the product to
be sure that they are aware of the information before use or other exposure. This MSDS
has been prepared according to the OSHA Hazard Communication Standard [29 CFR
1910.1200]. The MSDS information is based on sources believed to be reliable.
However, since data, safety standards, and government regulations are subject to change
and the conditions of handling and use, or misuse are beyond our control, Hill Brothers
Chemical Company makes no warranty, either expressed or implied, with respect to the
completeness or continuing accuracy of the information contained herein and disclaims
Product Name: Desert Brand CMFPS-Clear 3 of 4
all liability for reliance thereon. Also, additional information may be necessary or helpful
for specific conditions and circumstances of use. It is the user's responsibility to
determine the suitability of this product and to evaluate risks prior to use, and then to
exercise appropriate precautions for protection of employees and others.
Product Name: Desert Brand CMFPS-Clear 4 of 4
|