?br>
Biomolecules for research MATERIAL SAFETY DATA SHEET
Section 1 : Substance Identification
Prostaglandin E2
Name: CAS Number: 363-24-6
Catalog Number: PG-007 Chemical Formula: C20H32O5
Synonyms: (5Z,11 ,13E,15S)-11,15-Dihydroxy-9-oxoprosta-5,13-dien-1-oic acid; dinoprostone,
PGE2, U-12062, Cerviprost, Minprostin E2, Prepidil
Chemical Class: Prostaglandin
Company Identification: BIOMOL International L.P.
5120 Butler Pike
Plymouth Meeting PA 19462-1202 USA
(610) 941-0430 (9am-5pm ET)
Section 2 : Health Hazard Data
Acute Health Effects: Harmful if ingested or inhaled. May cause low blood pressure, Inhibition of
platelet aggregation, Induction of labor and menstruation, and Increased ocular pressure. May also
cause skin or eye irritation.
Chronic Health Effects: Repeated or prolonged exposure to this product may effect the kidneys, liver,
stomach and autonomic nervous system.
Section 3 : First Aid Measures
Eye Contact: Check for and remove contact lenses. Flush eyes with running water for at least 15
minutes separating eyelids. Seek medical attention immediately
Skin Contact: Wash skin thoroughly with soap and water. Remove contaminated clothing and shoes.
If skin irritation develops, Seek medical attention.
Inhalation: Remove to fresh air. Loosen tight clothing. If breathing is difficult, administer oxygen,
and seek medical attention immediately. Provide chemical label and MSDS if possible.
Ingestion: Remove dentures and clear mouth. Induce vomiting. Call physician or poison control
immediately. Provide chemical label and MSDS information if possible.
Section 4 : Fire and Explosion Data
Flammability: Not Flammable
Flash Point: Not Volatile
Combustion Products: Not Available
Extinguishing Media: Carbon Dioxide, Dry chemical powder, polymer foam, water spray
Special Firefighting Procedures: Use self-contained breathing apparatus and protective clothing to
prevent contact with skin and eyes.
Unusual Fire/Explosion Hazards: May emit toxic gases upon thermal decomposition.
Section 5 : Spill or Leak Procedures
Cleanup Procedures: EVACUATE AREA Wearing appropriate protective gear as outlined under
"Protective equipment" wipe up spill and place in sealed container and hold for disposal. Avoid
raising dust.
Waste Disposal Method: Contact your local Department of Health Services for information on the
disposal of this product. Observe all Federal, State and Local regulations concerning the disposal
of this product.
Section 6 : Storage and Handling Precautions
Protective Equipment: Wear suitable protective clothing, chemical resistant rubber gloves,
rubber boots, and chemical safety goggles.
Storage and Handling: This product must be stored at ?0癈. It should be stored in a tightly sealed
container. This product should be handled only by qualified experienced professionals. Wash
thoroughly after handling this material
Section 7 : Physical Data
Appearance: White solid Odor: Not Available
Molecular Weight: 352.5 Taste: Not Available
Boiling Point: Not Available Melting Point: 66-67癈
Solubility: Alcohols, Acetone, Ethyl acetate Vapor Density: Not Available
Specific Gravity: Not Available Vapor Pressure: Not Available
Volatility: Not Available
Section 8 : Stability and Reactivity Data
Stability: This material is stable if stored as directed
Conditions to Avoid: None known
Incompatibles: Not available
Section 9 : Toxicity Data
RTECS#: Not Available
Section 10 : Ecological Data
Ecotoxicological Information: None Available
The above information is believed to be correct but does not purport to be complete and should be used only as a guide. The burden of
safe use of this material rests entirely with the user.
Emergency Contact:
BIOMOL International L.P.
5120 Butler Pike
Plymouth Meeting, PA 19462 USA
(610) 941-0430
Last Revised : 9/19/97
|