MSDS #9
MATERIAL SAFETY DATA SHEET
BIG SKY COMPLIANCE COATINGS
2
HEALTH PRIMERS / CONVERTERS
3
FLAMMABILITY
REACTIVITY 0
SECTION I. MANUFACTURER
1-888/276-7071
ChemSpec USA, Inc. Telephone:
9287 Smucker Road 1-800/328-4892
Corporate Office:
Orrville, OH 44667 1-800/424-9300
Chemtrec Emergency:
www.chemspecpaint.com
Online:
Products on this MSDS:
EZ211, EZ213, EZ543, EZ545, EZ601A, EZ603A, PC3000M, PC3000S, PS3008, PS3042, PS3044,
PS3045, PS3051, PS3053, PS3055, PS3121, PS3123, PS3125, PS3161, PS3163, PS3165, PS5008A,
PS5009A, PS5012, PS5620.
OSHA Hazard Class: Flammable Liquid
DOT Shipping Class: Paint Related Materials UN1263
Hazardous Materials Information: See Section X.
SECTION II. HAZARDOUS INGREDIENTS
Also see Section X.
VAPOR SARA EXPOSURE LIMITS
INGREDIENTS CAS#
PRESSURE 313
OSHA ACGH STEL CEILING
20癈 (MMHg) REPORT
1. Acetone 67-64-1 181.0 No 750 ppm 750 ppm 1000 ppm* ----
2. Acrylic Copolymer N/E ---- ---- ---- ---- ---- ----
3. Acrylic Polymer Proprietary ---- ---- ---- ---- ---- ----
4. Acrylic Modifier Proprietary N/A No N/E N/E N/E ----
5. Acrylic Resin N/E ---- ---- ---- ---- ---- ----
3 3
6. Aluminum Silicate 1318-59-8 None No 2.0 mg/ m 2.0 mg/ m ---- ----
3 3
7. Barium Sulfate 7727-43-7 None No 15mg/m 10mg/m ---- ----
8. N-Butanol 71-36-3 5.5 Yes 100 ppm 50 ppm ---- 50 ppm skin*
9. Butyl Acetate 123-86-4 8.4 No 150 ppm 150 ppm 200 ppm* ----
10. 2-Butoxy Ethanol 111-76-2 0.6 Yes 50 ppm skin 25 ppm skin ---- ----
3 3
11. Carbon Black 1333-86-4 None No 3.5mg/m 3.5mg/m N/A N/A
12. Chlorobenzotriflouride 98-56-6 0.3 No N/E N/E N/E ----
13. Epoxy Resin Proprietary N/A No N/E N/E N/E ----
14. Ethanol 64-17-5 Unknown No 1000 ppm 1000 ppm ---- ----
15. Ethyl Acetate 141-78-6 76.0 No 400 ppm 400 ppm ---- ----
16. Ethyl 3-Ethoxy Propionate 763-69-9 1.11 No N/E ---- 50 ppm ----
3
17. Iron Oxide 1309-37-1 None No None 10 mg/ m ---- ----
18. Isobutyl Acetate 110-19-0 12.50 No 150 ppm 150 ppm ---- ----
19. LT Aliphatic Naptha 64742-89-8 20.00 No ---- ---- ---- ----
3 3
20. Magnesium Silicate 14807-96-6 None No 2.0 mg/m 2.0 mg/m ---- ----
21. Methoxy Propyl Acetate 108-65-6 3.8 No N/E N/E N/E ----
22. Methyl Amyl Ketone 110-43-0 2.1 No 100 ppm 100 ppm 50 ppm ----
23. Methyl Ethyl Ketone 78-93-3 70.0 Yes 200 ppm 200 ppm 300 ppm ----
MSDS #9 BIG SKY COMPLIANCE COATINGS ?PRIMERS/CONVERTERS ?Revised 6/13/2008 Page 1 of 7
24. Methyl Isobutyl Ketone 108-10-1 15.0 Yes 100 ppm 50 ppm 75 ppm ----
25. Methyl IsoAmyl Ketone 110-12-3 N/A No None 50 ppm -- --
26. N-Pentyl Propionate 624-54-4 1.5 No N/E 50 ppm N/E ----
3 3
27. Phosphoric Acid 7664-38-2 N/A No ---- 1 mg/m 3mg/m ----
skin
28. Polyester Resin Proprietary N/A No N/E N/E N/E ----
29. 2-Propanol 67-63-0 30.0 No 400 ppm 400 ppm 500 ppm ----
30. Solvent 90 64742-89-8 ---- No 300 ppm 300ppm 400 ppm 15 Min.
31. Solvent 100 64742-95-6 11.0 No 50 ppm 50 ppm 150 ppm ----
32. Tert Butyl Acetate 540-88-5 ---- No NE NE NE ----
3 3
33. Titanium Dioxide 13463-67-7 None No 10mg/m 10mg/m ---- ----
34. Toluene 108-88-3 36.0 Yes 100 ppm 50 ppm 150 ppm 200 ppm**
5mg/m3
35. Triethylamine Proprietary None No ---- ---- ----
36. Water 7732-18-5 23.6 No N/A N/A N/A ----
37. Xylene (Note A) 1330-20-7 25.0 Yes 100 ppm 100 ppm 150ppm 200 ppm**
15mg/m3 10mg/m3
38. Zinc Phosphate 7790-90-0 None No -- --
* Denotes 15 Minutes/** Denotes 10 Minutes/ (S) = Supplier/ N/E = Not Established
Note A: Technical grade Xylene contains 18-20% Ethylbenzene (100-41-4), which has 100ppm PEL, 100ppm TLV, 125ppm STEL and is subject to
the reporting requirements of Section 313 of Sara Title III.
See Section X. for specific ingredients and SARA 313 reportable wt.% data.
SECTION III. PHYSICAL DATA
Also see Section X.
129癋 - 374 癋 Slower than Ether
Boiling Range: Evaporation Rate:
Slight - Miscible Heavier than Air
Solubility in H2O: Vapor Density:
51.50 - 98.83 30.10 - 97.71
Volatile (%) by Volume: Volatile (%) by Weight:
6.72 - 12.1 lbs./gal.
Weight per Gallon:
SECTION IV. FIRE AND EXPLOSION
Flash Point: See Section X.
Flammable Limits: .8% - 13%
Extinguishing Media: Water Spray (for containment), Foam, Carbon Dioxide, Dry Chemical.
Special Fire Fighting Procedures:
Full protective equipment, including self-contained breathing apparatus, is recommended. Water from fogging nozzles may
be used to cool closed containers to prevent pressure build up preventing rupturing. Do not use direct water stream on
combustible or flammable liquid fires.
Unusual fire and explosion hazards:
When heated above the defined flash points these solvents emit flammable vapors which, when mixed with air,
can burn or be explosive when exposed to any ignition source. Fine mists or spray may be flammable at
temperatures below the flash point.
SECTION V. HEALTH HAZARD DATA
General Effects:
Ingestion: Gastrointestinal distress. In the unlikely event of ingestion call a physician immediately and have the names of
ingredients available.
Inhalation: May cause nose and throat irritation. Repeated and prolonged overexposure to solvents may lead to permanent
brain and nervous system damage. Eye watering, headaches, nausea, dizziness and loss of coordination are signs that solvent
levels are too high. If affected by inhalation of vapor or spray mist, remove to fresh air. If breathing difficulty persists, or
occurs later, consult a physician.
Skin or Eye Contact: May cause irritation or burning of the eyes. Repeated or prolonged liquid contact may cause skin
irritation with discomfort and dermatitis. In case of eye contact, immediately flush with plenty of water for at least 15
minutes; call a physician. In case of skin contact, wash with soap and water. If irritation occurs, contact a physician.
Specific Effects:
Acetone: Can cause dermatitis.
MSDS #9 BIG SKY COMPLIANCE COATINGS ?PRIMERS/CONVERTERS ?Revised 6/13/2008 Page 2 of 7
Aromatic Hydrocarbons, Solvent 90, Solvent 100, VM&P Napthas, LT Aliphatic Naptha & Mineral Spirits: Laboratory
studies with rats have shown that petroleum distillates cause kidney damage and kidney or liver tumors. These effects were not
seen in similar studies with guinea pigs, dogs or monkeys. Several studies evaluating petroleum workers have not shown a
significant increase of kidney damage or an increase in liver tumors.
2-Butoxy Ethanol: Can be absorbed through the skin in harmful amounts. May cause injury to the kidneys, liver, blood and or
bone marrow. Repeated overexposure may result in blood damage. Eye contact may cause corneal injury. Has been toxic to
fetus in laboratory animals at levels toxic to the mother.
Butyl Acetate: May cause abnormal liver function.
Ethanol: Over exposure may cause eye, throat, and nose irritation. May cause skin irritation and dermatitis. May cause abnormal
liver function with jaundice. Tests in laboratory animals have shown cardiovascular effects and possible mutagenic activity in
laboratory cell cultures.
Ethyl Acetate: Prolonged and repeated high exposure of laboratory animals resulted in secondary anemia with increase in white
blood cells.
Ethyl 3-Ethoxy Propionate: Has been toxic to the fetus in laboratory animals at doses that are toxic to the mother.
Ethylbenzene: (Contributed from Xylene) - moderate toxicity by irritation to the skin, eyes, mucous membranes and by ingestion
and inhalation routes. The International Agency for Research on Cancer (IARC) has evaluated ethylbenzene and classified it as a
possible human carcinogen (Group 2B) based on sufficient evidence for carcinogenicity in experimental animals, but inadequate
evidence for cancer in exposed humans.
Magnesium Silicate: Repeated overexposure to talc may lead to chronic lung disease.
Methyl Amyl Ketone: Ingestion studies on laboratory animals showed that very high oral doses caused increase liver and kidney
weights.
Methyl Ethyl Ketone: High concentrations have caused embryo toxic effects in laboratory animals. Liquid splashes in the eyes
may result in chemical burns.
Methoxy Propyl Acetate: May cause moderate eye burning. Continuous re-over exposures may result in liver and kidney injury.
Methyl Isobutyl Ketone: Reoccurring overexposure may result in liver and kidney damage.
N-Butanol: May cause chemical burns to eyes. May cause abnormal blood forming function with anemia. Reoccurring
overexposure may result in liver and kidney injury.
2-Propanol: Ingestion studies on laboratory animals showed that very high oral doses caused increased liver and kidney weights.
Titanium Dioxide: In lifetime inhalation tests, lung cancer was found in some rats exposed to 250-mg/m3 respirable dust. Analysis
showed due to overwhelmed levels this data is not relevant to the work place.
Toluene: Continuous recurrent overexposure may cause liver or kidney damage. High airborne levels have produced irregular
heartbeats in animals and occasional palpitations in humans. Rats exposed to very high airborne levels have exhibited high
frequency hearing deficits. Warning: This chemical is known to the state of California to cause birth defects or other
reproductive harm.
Xylene: High concentrations have caused embryo toxic effects in laboratory animals. Reoccurring overexposure may cause liver or
kidney damage. Can be absorbed through the skin in harmful amounts.
SECTION VI. REACTIVITY DATA
Stability: Stable
Incompatibility (Materials to avoid): None reasonably foreseeable.
Hazardous Decomposition Products: CO, CO2, Smoke.
Hazardous Polymerization: Will not occur.
SECTION VII. SPILL OR LEAK PROCEDURES
Steps to be taken in case material is released or spilled: Ventilate area. Remove sources of ignition. Prevent skin contact and
breathing of vapor. Wear a properly fitted vapor/particulate respirator (NIOSH/MSHA TC-23C). Confine and remove with inert
absorbent.
Waste Disposal Method: Do not allow material to contaminate ground water systems. Incinerate absorbed material in accordance
with federal, state, and local requirements. Do not incinerate in closed containers.
SECTION VIII. SPECIAL PROTECTION INFORMATION
Do not breathe vapors or mists. Wear a properly fitted vapor/particulate respirator approved by NIOSH/MSHA (TC-23C) for use with
paints during application and until all vapors and spray mists are exhausted. In confined spaces or in situations where continuous
spray operations are typical or proper respirator fit is not possible, wear a positive-pressure, supplied-air respirator (TC-19C). In all
cases, follow the respirator manufacturer's direction for respirator use. Do not permit anyone without protection in the painting area.
Ventilation: Provide sufficient ventilation in volume and pattern to keep contaminants below applicable OSHA requirements.
Protective Clothing: Neoprene gloves and coveralls are recommended.
Eye Protection: Desirable in all industrial situations. Include splashguards or side shields.
MSDS #9 BIG SKY COMPLIANCE COATINGS ?PRIMERS/CONVERTERS ?Revised 6/13/2008 Page 3 of 7
SECTION IX. SPECIAL PRECAUTIONS
Precautions to be taken in handling and storing: Observe label precautions. Keep away from heat, sparks and flame.
Close container after each use. Ground containers when pouring. Wash thoroughly after handling and before
eating or smoking. Do not store above 120癋.
Other Precautions: Do not sand, flame cut, braze or weld dry coating without a NIOSH/MSHA approved respirator or
appropriate ventilation.
SECTION X. OTHER INFORMATION
PRODUCT SPECIFICATIONS
For each product part number and chemical listing below the chemicals that have weight percentages in parenthesis are subject to the
reporting requirements of Section 313 of the Emergency Planning and Right-To-Know Act of 1986 and 40 CFR 372.
EZ211 Acetone 10-15%, Acrylic Copolymer, Acrylic Resin, Carbon Black <1%, Chlorobenzotriflouride, Titanium
Dioxide 1-5%, Toluene (11.2%).
11.00 lbs/gallon 0癋
Gallon Wt.: Flash Point:
58.60 1.24 lbs./gallon
Wt. % Solids: Material VOC:
42.90 2.10 lbs./gallon
Vol. % Solids: Coating VOC:
1B 7.98 lbs./gallon
OSHA Storage: Solvent Density:
Federally Exempt Solvent = 40.43% by volume
EZ213 Acetone 10-15%, Acrylic Copolymer, Acrylic Resin, Black Iron Oxide, Chlorobenzotriflouride, Toluene (11.0%).
11.02 lbs/gallon -5癋
Gallon Wt.: Flash Point:
58.70 1.24 lbs./gallon
Wt. % Solids: Material VOC:
43.20 2.10 lbs./gallon
Vol. % Solids: Coating VOC:
1B 7.97 lbs./gallon
OSHA Storage: Solvent Density:
Federally Exempt Solvent = 40.00% by volume
EZ543 Aluminum Silicate, Carbon Black <1%, Isobutyl Acetate 10-15%, Magnesium Silicate, Methyl Isobutyl Ketone
(5%), 2-Proponol <5%, Red Oxide, Titanium Dioxide 1-5%, Toluene (27%).
10.14 lbs. 52癋
Gallon Wt.: Flash Point:
54.80 4.58 lbs./gallon
Wt. % Solids: Material VOC:
36.00 4.58 lbs./gallon
Vol. % Solids: Coating VOC:
1C 7.15 lbs./gallon
OSHA Storage: Solvent Density:
EZ545 Aluminum Silicate, Carbon Black 1-5%, Magnesium Silicate, Methyl Isobutyl Ketone (5%),
2-Proponol 1-5%, Iron Oxide, Toluene (40%).
10.17 lbs. 52癋
Gallon Wt.: Flash Point:
54.80 4.59 lbs./gallon
Wt. % Solids: Material VOC:
36.00 4.59 lbs./gallon
Vol. % Solids: Coating VOC:
1C 7.20 lbs./gallon
OSHA Storage: Solvent Density:
EZ601 Acrylic Polymer, Carbon Black <1%, Magnesium Silicate, Methyl Ethyl Ketone (10%), Titanium Dioxide 5-
10%, Toluene (10%), Xylene (10%).
11.73 lbs. 24癋
Gallon Wt.: Flash Point:
69.20 3.62 lbs./gallon
Wt. % Solids: Material VOC:
48.50 3.62 lbs./gallon
Vol. % Solids: Coating VOC:
1B 7.06 lbs./gallon
OSHA Storage: Solvent Density:
MSDS #9 BIG SKY COMPLIANCE COATINGS ?PRIMERS/CONVERTERS ?Revised 6/13/2008 Page 4 of 7
EZ603 Acrylic Polymer, Carbon Black 5-10%, Magnesium Silicate, Methyl Ethyl Ketone (10%), Toluene (10%),
Xylene (10%).
11.73 lbs. 24癋
Gallon Wt.: Flash Point:
69.20 3.64 lbs./gallon
Wt. % Solids: Material VOC:
48.50 3.64 lbs./gallon
Vol. % Solids: Coating VOC:
1B 7.06 lbs./gallon
OSHA Storage: Solvent Density:
PC3000M Phosphoric Acid, Acetone 25-30%, N-Butanol (35-40%), Water, Methyl Amyl Ketone 25-30%.
6.80 lbs. 0癋
Gallon Wt.: Flash Point:
2.35 4.65 lbs./gallon
Wt. % Solids: Material VOC:
1.07 6.65 lbs./gallon
Vol. % Solids: Coating VOC:
1C 6.71 lbs./gallon
OSHA Storage: Solvent Density:
Federal Exempt Solvent = 30.20% by Vol.
PC3000S Phosphoric Acid, Acetone 20-25%, N-Butanol (39%), Methyl Amyl Ketone (25-30%), Water, Xylene (10.54%).
6.87 lbs. 0癋
Gallon Wt.: Flash Point:
2.33 5.40 lbs./gallon
Wt. % Solids: Material VOC:
1.07 6.72 lbs./gallon
Vol. % Solids: Coating VOC:
1C 6.63 lbs./gallon
OSHA Storage: Solvent Density:
Federal Exempt Solvent = 20.0% by Vol.
PS3008 Resins and Film Formers (Proprietary), Tert Butyl Acetate 15-20%, 2-Butoxy Ethanol (1.3%), Xylene (1.5%),
Methyl Isobutyl Ketone (< 1.0%), Acetone, Magnesium Silicate, Titanium Dioxide 1-5%, Methyl Amyl Keytone
10-15%, Toluene (13.8%).
8.82 lbs. 0癋
Gallon Wt.: Flash Point:
38.36 2.66 lbs./gallon
Wt. % Solids: Material VOC:
21.91 4.27 lbs./gallon
Vol. % Solids: Coating VOC:
1C 6.86 lbs./gallon
OSHA Storage: Solvent Density:
Federal Exempt Solvent = 3.20% by Vol.
PS3042 Methyl Isobutyl Ketone (18%), Xylene (9%), 2-Propanol (<5%), 2-Butoxy Ethanol (<5%), Magnesium Silicate,
Titanium Dioxide 10-15%, Epoxy Resins (Proprietary).
10.90 lbs. 60癋
Gallon Wt.: Flash Point:
67.25 3.57 lbs./gallon
Wt. % Solids: Material VOC:
48.0 3.57 lbs./gallon
Vol. % Solids: Coating VOC:
1C 6.90 lbs./gallon
OSHA Storage: Solvent Density:
PS3044 Methyl Isobutyl Ketone (18%), Xylene (9%), 2-Propanol (<5%), 2-Butoxy Ethanol 1-5%, Magnesium Silicate,
Titanium Dioxide 5-10%, Epoxy Resins (Proprietary).
10.75 lbs. 60癋
Gallon Wt.: Flash Point:
66.80 3.57 lbs./gallon
Wt. % Solids: Material VOC:
48.0 3.57 lbs./gallon
Vol. % Solids: Coating VOC:
1C 6.92 lbs./gallon
OSHA Storage: Solvent Density:
PS3045 Methyl Isobutyl Ketone (15%), Xylene (9%), 2-Propanol 1-5%, 2-Butoxy Ethanol 1-5%, Magnesium Silicate,
Barium Sulfate, Carbon Black, Epoxy Resins (Proprietary).
10.87 lbs. 60癋
Gallon Wt.: Flash Point:
68.50 3.43 lbs./gallon
Wt. % Solids: Material VOC:
50.4 3.43 lbs./gallon
Vol. % Solids: Coating VOC:
1B 6.92 lbs./gallon
OSHA Storage: Solvent Density:
MSDS #9 BIG SKY COMPLIANCE COATINGS ?PRIMERS/CONVERTERS ?Revised 6/13/2008 Page 5 of 7
PS3051 Acrylic Resins, Butyl Acetate 5-10%, Methoxy Propyl Acetate, N-Pentyl Propionate, Tert Butyl Acetate, Xylene
1.4%, Titanium Dioxide, Magensium Silicate, Zinc Phosphate.
11.69 lbs. 72癋
Gallon Wt.: Flash Point:
64.1 3.24 lbs./gallon
Wt. % Solids: Material VOC:
44.0 3.73 lbs./gallon
Vol. % Solids: Coating VOC:
1B 7.43 lbs./gallon
OSHA Storage: Solvent Density:
PS3053 Acrylic Resins, Butyl Acetate 5-10%, Methoxy Propyl Acetate, N-Pentyl Propionate, Tert Butyl Acetate, Xylene
1.4%, Titanium Dioxide, Magensium Silicate, Zinc Phosphate, Barium Sulfate.
11.57 lbs. 72癋
Gallon Wt.: Flash Point:
63.7 3.24 lbs./gallon
Wt. % Solids: Material VOC:
44.0 3.73 lbs./gallon
Vol. % Solids: Coating VOC:
1B 7.43 lbs./gallon
OSHA Storage: Solvent Density:
PS3055 Acrylic Resins, Butyl Acetate 5-10%, Methoxy Propyl Acetate, N-Pentyl Propionate, Tert Butyl Acetate, Xylene
1.4%, Magensium Silicate, Zinc Phosphate, Barium Sulfate.
11.4 lbs. 72癋
Gallon Wt.: Flash Point:
63.4 3.24 lbs./gallon
Wt. % Solids: Material VOC:
44.0 3.73 lbs./gallon
Vol. % Solids: Coating VOC:
1B 7.42 lbs./gallon
OSHA Storage: Solvent Density:
PS3121 Acrylic Polymers, Butyl Acetate 5-10%, Magnesium Silicate, Methyl Ethyl Ketone (8%), Methyl Isobutyl Ketone
(8%), Titanium Dioxide 15-20%, Xylene (14%).
11.19 lbs. 24癋
Gallon Wt.: Flash Point:
63.3 4.11 lbs./gallon
Wt. % Solids: Material VOC:
42.0 4.11 lbs./gallon
Vol. % Solids: Coating VOC:
1B 7.01 lbs./gallon
OSHA Storage: Solvent Density:
PS3123 Acrylic Polymers, Barium Sulfate, Butyl Acetate 5-10%, Carbon Black 0-5%, Magnesium Silicate, Methyl Ethyl
Ketone (8%), Methyl Isobutyl Ketone (8%), Titanium Dioxide 5-10%, Xylene (14%).
11.15 lbs. 24癋
Gallon Wt.: Flash Point:
63.0 4.12 lbs./gallon
Wt. % Solids: Material VOC:
41.8 4.12 lbs./gallon
Vol. % Solids: Coating VOC:
1B 7.01 lbs./gallon
OSHA Storage: Solvent Density:
PS3125 Acrylic Polymers, Barium Sulfate, Butyl Acetate 5-10%, Carbon Black 1-5%, Magnesium Silicate, Methyl Ethyl
Ketone (7.5%), Methyl Isobutyl Ketone (7.5%), Xylene (14%).
11.25 lbs. 24癋
Gallon Wt.: Flash Point:
63.6 4.10 lbs./gallon
Wt. % Solids: Material VOC:
42.0 4.10 lbs./gallon
Vol. % Solids: Coating VOC:
1B 7.01 lbs./gallon
OSHA Storage: Solvent Density:
PS3161 Acrylic Polymers, Methyl Amyl Ketone 10-15%, N-Pentyl Propionate, Tert Butyl Acetate, Titanium Dioxide
20-25%, Xylene (1%).
9.69 lbs. 癋
Gallon Wt.: Flash Point:
53.8 2.78 lbs./gallon
Wt. % Solids: Material VOC:
37.0 3.66 lbs./gallon
Vol. % Solids: Coating VOC:
1B 7.15 lbs./gallon
OSHA Storage: Solvent Density:
Federal Exempt Solvent = 24.0% by Vol.
PS3163 Acrylic Polymers, Barium Sulfate, Carbon Black, Methyl Amyl Ketone 10-15%, N-Pentyl Propionate, Tert Butyl
Acetate, Titanium Dioxide 10-15%, Xylene (1.37%).
9.67 lbs. 癋
Gallon Wt.: Flash Point:
53.0 2.73 lbs./gallon
Wt. % Solids: Material VOC:
36.5 3.66 lbs./gallon
Vol. % Solids: Coating VOC:
1B 7.2 lbs./gallon
OSHA Storage: Solvent Density:
Federal Exempt Solvent = 25.5% by Vol.
MSDS #9 BIG SKY COMPLIANCE COATINGS ?PRIMERS/CONVERTERS ?Revised 6/13/2008 Page 6 of 7
PS3165 Acrylic Polymers, Barium Sulfate, Carbon Black, N-Pentyl Propionate, Methyl Amyl Ketone 10-15%, Tert Butyl
Acetate, Xylene (2.3%).
9.72 lbs. 癋
Gallon Wt.: Flash Point:
54.2 2.93 lbs./gallon
Wt. % Solids: Material VOC:
37.5 3.66 lbs./gallon
Vol. % Solids: Coating VOC:
1B 7.09 lbs./gallon
OSHA Storage: Solvent Density:
Federal Exempt Solvent = 22.65% by Vol.
PS5008A Xylene (18%), Butyl Acetate 5-10%, Methoxy Propyl Acetate, Solvent 90, Magnesium Silicate, Acrylic Resin,
Titanium Dioxide 10-15%.
11.36 lbs. 100癋
Gallon Wt.: Flash Point:
62.4 4.27 lbs./gallon
Wt. % Solids: Material VOC:
42.3 4.27 lbs./gallon
Vol. % Solids: Coating VOC:
1C 7.40 lbs./gallon
OSHA Storage: Solvent Density:
PS5009A Xylene (18%), Methoxy Propyl Acetate, Butyl Acetate 5-10%, Solvent 90, Magnesium Silicate, Acrylic Resin,
Titanium Dioxide 10-15%.
11.30 lbs. <100癋
Gallon Wt.: Flash Point:
62.20 4.27 lbs./gallon
Wt. % Solids: Material VOC:
42.30 4.27 lbs./gallon
Vol. % Solids: Coating VOC:
1C 7.41 lbs./gallon
OSHA Storage: Solvent Density:
PS5012A Chlorobenzotriflouride, Methoxy Propyl Acetate, Acetone 10-15%, Hydrocarbon Solvent,
Magnesium Silicate, Titanium Dioxide 10-15%, Xylene (2%).
11.90 lbs. <100癋
Gallon Wt.: Flash Point:
60.00 1.40 lbs./gallon
Wt. % Solids: Material VOC:
43.00 2.31 lbs./gallon
Vol. % Solids: Coating VOC:
1C 9.07 lbs./gallon
OSHA Storage: Solvent Density:
Federal Exempt Solvent = 38.91% by Vol.
PS5620 Acrylic Copolymer, Methyl Isobutyl Ketone (24.9%), Xylene (18.2%), Toluene (9.7%), Ethyl 3-Ethoxy Propionate,
Methyl Amyl Ketone 1-5%, Titanium Dioxide 5-10%.
8.67 lbs. 40癋
Gallon Wt.: Flash Point:
40.00 ?1.0% 5.20 lbs./gallon
Wt. % Solids: Material VOC:
25.6% 5.20 lbs./gallon
Vol. % Solids: Coating VOC:
1B 7.00 lbs./gallon
OSHA Storage: Solvent Density:
Xylene: when present it can be assumed 18-20% of the Wt. % reported is Ethyl benzene.
Flash Point: Determined by TCC, expressed in degrees Fahrenheit.
Coating VOC: WS ?WW - WEX Represents VOC per EPA Method 24.
VT ?VW - VEX
Material VOC: w S-wW-wEX
Where: WS = total solvent weight VEX = volume of exempt solvent
WW = weight of water VW = volume of water
WEX = weight of exempt solvent VT = total volume
Warning: KEEP THIS AND ALL PAINT RELATED PRODUCTS OUT OF THE REACH OF CHILDREN!
The information contained in this MSDS is based on data from sources considered to be reliable but ChemSpec USA, Inc. does not guarantee the
accuracy or completeness thereof. ChemSpec USA, Inc. urges each customer or recipient of this MSDS to study it carefully to become aware of and
understand the hazards associated with this product. The reader should consider consulting reference works or individuals who are experts in
ventilation, toxicology or fire prevention as necessary or appropriate to use and understand the data in this MSDS.
Note: The data on this MSDS relates only to individual components and does not represent the end mixed product. Read all other Component
Material Safety Data Sheets.
END OF MSDS
MSDS #9 BIG SKY COMPLIANCE COATINGS ?PRIMERS/CONVERTERS ?Revised 6/13/2008 Page 7 of 7
|