UTILITY MANUFACTURING CO., INC. MATERIAL SAFETY DATA SHEET
700 MAIN STREET, WESTBURY, NY 11590
(516) 997-6300 - FAX # (516) 997-6345
CAULKIT
FOR CHEMICAL EMERGENCY: Spill, Leak, Fire, Exposure, or Accident - Call INFOTRAC - Day or Night: 1-800-535-5053
THIS MSDS COMPLIES WITH 29 CFR 1910.1200 (HAZARD COMMUNICATION STANDARD) IMPORTANT: Read this MSDS
before handling & disposing of this product. Pass this information on to employees, customers and users of this product.
PRODUCT IDENTIFICATION
DOT Shipping name: CAS NO.: MIXTURE
ADHESIVES, FLAMMABLE
Chemical Family: UN/NA #: N/A
CELLULOSE NITRATE SOLUTION
DOT Hazard Class: DATE OF ISSUE: 11/06
CLASS 3
SECTION I - HAZARDOUS INGREDIENTS/EXPOSURE LIMITS
Hazardous Ingredients: CAS # TLV/PEL AGENCY TYPE SARA-313(% Range)
ISOPROPANOL 67-63-0 400 ACGIH TLV
ETHYL ACETATE 141-78-6 400 ACGIH TLV
SECTION II - EMERGENCY AND FIRST AID PROCEDURES
WARNING: FLAMMABLE
EYE CONTACT: Move person away from exposure and into fresh air. If irritation or redness develops, flush eyes with clean water and
seek medical attention. For direct contact hold eyelids apart for at least 15 minutes. Seek medical attention.
SKIN CONTACT: Remove contaminated shoes and clothing and cleanse affected areas thoroughly by washing with mild soap and water.
If irritation persists seek medical attention.
INHALATION: (breathing) Move victim to fresh air. Seek medical assistance .If not breathing, give artificial respiration. If difficulty in
breathing, give oxygen..
INGESTION: (swallowing) If swallowed, seek emergency medical attention. Do not induce vomiting.
SECTION III - HEALTH HAZARDS / ROUTES OF ENTRY
EYE CONTACT: One or more components of this material may be an eye irritant.
SKIN CONTACT: Continuous contact with this material may cause drying of skin. Chemical itself is an irritant or sensitizer.
SKIN ABSORPTION: Symptoms of toxicity are anticipated by this route .
INHALATION: (breathing) Inhalation of vapors may cause drowsiness, headache, lethargy, nausea and damage to the central nervous
system.
INGESTION: (swallowing) Ingestion of large quantities may cause the following: Irritation of digestive tract, signs of nervous system
depression, such as headache, drowsiness, dizziness, loss of coordination, fatigue, and nausea.
SECTION IV - SPECIAL PROTECTION INFORMATION
VENTILATION: If current ventilation practices are not adequate to maintain airborne concentrations below established exposure limits
(see section I), additional ventilation or exhaust systems may be required.
RESPIRATORY PROTECTION: The use of respiratory protection is advised when concentrates exceed the established exposure limits
(see Section I). Depending on the airborne concentration use a respirator or gas mask with appropriate cartridges or canisters
(NIOSH approved) or supplied air.
PROTECTIVE GLOVES: The use of gloves impermeable to the specific material handled is advised to prevent possible irritation.
EYE PROTECTION: Approved eye protection to safeguard against potential eye contact, irritation or injury is recommended.
SECTION V - REACTIVITY DATA
STABILITY: Stable
INCOMPATIBILITY: (materials to avoid) This product is incompatible with: Oxidizing agents, strong acids and bases
HAZARDOUS DECOMPOSITION PRODUCTS: Thermal decomposition in the presence of air may yield carbon monoxide, carbon
dioxide.
HAZARDOUS POLYMERIZATION: Will not occur
SECTION VI - SPILL OR LEAK PROCEDURES
PRECAUTIONS IN CASE OF LEAK OR SPILL: Keep all sources of ignition and hot metal surfaces away from spill/release. Allow
material to dry, then scrape up for proper disposal. Do not incinerate. Wear appropriate protective equipment including respiratory
protection as conditions warrant (see Section IV
WASTE DISPOSAL METHOD: Dispose of product in accordance with local, county, state, and federal regulations.
Page 1 16-355
UTILITY MANUFACTURING CO., INC. MATERIAL SAFETY DATA SHEET
700 MAIN STREET, WESTBURY, NY 11590
(516) 997-6300 - FAX # (516) 997-6345
CAULKIT
SECTION VII - STORAGE AND SPECIAL PRECAUTIONS
HANDLING AND STORAGE PRECAUTIONS: Do not get in eyes, skin or clothing. Do not breathe vapor mist or gas. Keep
containers tightly closed, cool, dry, and away from all sources of ignition. Use and store this product with adequate ventilation.
Avoid inhalation of vapors and personal contact with the product. Use good personal hygiene practices. Keep out of reach of
children and pets.
SECTION VIII - FIRE AND EXPLOSION HAZARD DATA
EXTINGUISHING MEDIA: Extinguish with dry chemical, water stream, CO2, or a universal type foam.
FIRE AND EXPLOSION HAZARD: May decompose during contact with flames, heating elements, or in combustion engines releasing
irritating gases. Container may explode if heated due to resulting pressure rise.
FIRE FIGHTING PROCEDURES: Wear appropriate protective equipment including respiratory protection as conditions warrant (see
Section IV). Stop spill/release if it can be done without risk. Water spray may be useful in minimizing or dispersing vapors and
cooling equipment exposed to heat and flame. Avoid spreading burning liquid with water used for cooling purposes.
SECTION IX - PHYSICAL DATA
APPROXIMATE BOILING POINT (DEG F): PER CENT VOLATILE:
169 100
SPECIFIC GRAVITY (68 F): FLASH POINT (TCC, DEG F):
.9 24 deg F. TCC
RELATIVE EVAPORATION RATE PER CENT SOLUBILITY IN
<1 NIL
(ESTIMATED): WATER:
VAPOR PRESSURE @20C mmHg <1
(CALCULATED):
SECTION X - OTHER REGULATORY DATA
SARA HMIS
SECTION 302: ETHYL ACETATE Health: 2
SECTION 311 & 312: FIRE, ACUTE, CHRONIC Flammability: 3
SECTION 313: See Section I.I Reactivity: 3
TSCA
CALIFORNIA PROPOSITION 65
All components are in full compliance
with the TSCA inventory. LISTED
RCRA CERCLA
Waste material would be a U112 ETHYL ACETATE RQ : 5000 LBS.
CARCINOGENICITY:
NOT LISTED with NTP or IARC.
NOTICE
The supplier disclaims all expressed or implied warranties of merchantability or fitness for a specific use, with respect to the product or the information
provided herein, except for conformation to contracted specifications. All information appearing herein is based upon data obtained from manufactures
and/or recognized technical sources. While the information is believed to be accurate, we make no representations as to its accuracy or sufficiency.
Conditions of use are beyond our control, and therefore users are responsible for verifying the data under their own operating conditions to determine
whether the product is suitable for their particular purposes and they assume risks of their use, handling, and disposal of the product. Users also assume all
risks in regards to the publication or use of, or reliance upon, information contained herein. This information relates only to the product designated herein,
and does not relate to its use in combination with any other material or process.
Page 2 16-355
|