MATERIAL SAFETY DATA SHEET
PRODUCT NAME: BARMAC LINKS MICRO (Various Analyses)
PHONE: (07) 3280 3000
EMERGENCY AFTER HOURS NUMBER: (07) 3280 3000
______________________________________________________________________________
Not classified as hazardous by Worksafe Australia Criteria
______________________________________________________________________________
IDENTIFICATION
OTHER NAMES: Nil
USE: Fertilizer
UN NUMBER: N/A
HAZCHEM CODE: N/A
DANGEROUS GOODS CLASS: N/A
POISONS SCHEDULE: N/A
PHYSICAL DESCRIPTION/PROPERTIES
APPEARANCE: Pink Gray granule
0
FLASHPOINT ( C): N/A
0
BOILING POINT ( C): N/A
FLAMMABILITY LIMITS (%): N/A
VAPOUR PRESSURE (___): N/A
SOLUBILITY IN WATER (g/L): Coating is relatively insoluble
SPECIFIC GRAVITY: N/A
MATERIAL SAFETY DATA SHEET
PRODUCT NAME: BARMAC LINKS MICRO (Various Analyses)
PHONE: (07) 3280 3000
EMERGENCY AFTER HOURS NUMBER: (07) 3280 3000
______________________________________________________________________________
Not classified as hazardous by Worksafe Australia Criteria
______________________________________________________________________________
HEALTH HAZARD INFORMATION
______________________________________________________________________________
HEALTH EFFECTS
ACUTE:
SWALLOWED: Ingestion of very large amounts may cause diarrhoea, nausea, vomiting and
cramps.
EYES: May cause irritation to eyes.
SKIN: May cause skin irritation.
INHALED: Product should not cause any irritation under normal use patterns.
CHRONIC: Product is not listed as a carcinogen and no other effects are known.
FIRST AID
SWALLOWED: Swallowing small quantities is not normally harmful. Give large volumes of
water. Induce vomiting or perform gastric lavage if large amounts ingested. Seek medical advice.
EYES: Flush eyes for 15 minutes with running water. If irritation persists consult a doctor.
SKIN: Wash thoroughly.
INHALED: Irritation from dust should cease once patient is removed from source of dust. If not
seek medical advise.
FIRST AID FACILITIES: No special facilities required for this product.
ADVICE TO DOCTOR: Treat symptomatically
PRECAUTIONS FOR USE
E:\New Website\PROCESSING MSDS\Links Micro.Doc
PAGE 3 OF 4
MATERIAL SAFETY DATA SHEET
PRODUCT NAME: BARMAC LINKS MICRO (Various Analyses)
PHONE: (07) 3280 3000
EMERGENCY AFTER HOURS NUMBER: (07) 3280 3000
______________________________________________________________________________
Not classified as hazardous by Worksafe Australia Criteria
______________________________________________________________________________
______________________________________________________________________________
EXPOSURE STANDARDS: No exposure standards have been set for this product.
ENGINEERING CONTROLS: Provide local exhaust ventilation to reduce dust levels to less
than permissible levels.
PERSONAL PROTECTION: None normally required. Eye protection is suggested so contact
can be avoided. If airborne dust levels are high a dust mask is recommended to avoid inhalation.
FLAMMABILITY: Not flammable.
______________________________________________________________________________
SAFE HANDLING INFORMATION
______________________________________________________________________________
STORAGE AND TRANSPORT: Not classified as a dangerous good. Store in a cool, dry place,
apart from herbicides and fungicides.
SPILLS AND DISPOSAL: Sweep up spills and apply in normal manner. If contamination of
material renders it unusable dispose of at a landfill site approved by local authorities.
MATERIAL SAFETY DATA SHEET
PRODUCT NAME: BARMAC LINKS MICRO (Various Analyses)
PHONE: (07) 3280 3000
EMERGENCY AFTER HOURS NUMBER: (07) 3280 3000
______________________________________________________________________________
Not classified as hazardous by Worksafe Australia Criteria
______________________________________________________________________________
PHYSICAL HAZARD INFORMATION
Fire and Explosion
Flash point (Test Method): N/A
Flammable Limits (% in Air): N/A
Auto Ignition Temperature: N/A
Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
Conditions to Avoid: None known
Hazardous Decomposition Products: Urea and methylene urea nitrogen sources can generate
ammonia in a fire. Oxides of nitrogen, carbon,
sulphur, phosphorus and potassium may also be
generated.
Chemical Incompatibilities: None known
Unusual Fire, Explosion risks: Urea and methylene urea nitrogen sources can generate
ammonia in a fire
Reactivity Hazards: Oxides of nitrogen, carbon, sulphur, phosphorus and
potassium may also be generated.
Extinguishing Media: Dry chemical or select appropriate method of extinguishing surrounding fire.
In Case of Fire: Use self-contained air supply. Contain run-off as ingredients may be toxic to
aquatic organisms.
NOTICE: Information for this product is believed to be reliable, however buyer and user assume all risk of use,
handling and storage whether in accordance with directions or not. Barmac Industries Pty Ltd and its agents give no
guarantee or warranty of any kind express or implied concerning the use of this product and will not accept any
responsibility whatsoever whether in contract or tort for any loss including consequential loss arising out of the use of
this product or caused by this product.