MATERIAL SAFETY DATA SHEET
Trade Name: ConcretePlusTM CP845 Skim/Scratch coating - Part A
SECTION I: COMPANY IDENTIFICATION
Company: Cohesant Materials Emergency Telephone #: 800-424-9300
st
13105 East 61 Street South, Suite A Chemtrec
Broken Arrow, OK 74012
Revision Date: 9/22/09 Information Telephone #: 918-615-0123
877-615-2648
SECTION II: INGREDIENT INFORMATION
INGREDIENT CAS NUMBER PERCENT PEL TLV
Epoxy Resin 25085-99-8 65 - 85% N/E N/E
Polyglycol Diglycidyl Ether Epoxy Resin 26142-30-3 5 - 15% N/E N/E
*80 mg/m3 *3 mg/m3
Amorphous Silicon Dioxide 7631-86-9 5 - 20%
*15 mg/m3 *10 mg/m3
Titanium Dioxide 13463-67-7 1 - 8%
*5 mg/m3 *3 mg/m3
Alkyl Quaternary Ammonium Clay not available 1 - 5%
N/E indicates "not established"
SARA Title III, Section 313 ingredients: None All ingredients are TSCA inventory listed.
*Note: The PEL & TLV exposure limits for this ingredient are for respirable dust levels. In this product, it is pre-dispersed
and not available as a dust. Therefore, under normal use conditions it would not be considered a hazard.
The specific identity and/or remaining ingredient(s) are being withheld as a trade secret per 29 CFR 1910.1200.
SECTION III: PHYSICAL DATA
Boiling Point: > 200 deg F Specific Gravity: 1.2 - 1.4
Vapor Pressure: Not determined Melting Point: Not determined
Vapor Density: Not determined Evaporation Rate: Not determined
Solubility in Water: Negligible % Volatile by Volume: <1%
Appearance and Odor: White liquid with heavy paint consistency ?mild epoxy odor
SECTION IV: FIRE & EXPLOSION HAZARD DATA
Flash Point: >200 deg F, TCC Method OSHA/NFPA Fire Hazard Classification: Class III B
Extinguishing Media: Foam, CO2, Dry Chemical, Water Spray LFL: Not determined UFL: Not determined
Special Fire Fighting Procedures: The use of self-contained breathing apparatus is recommended for firefighters. Water
may be helpful in keeping adjacent containers cool. Avoid spreading burning liquids with water used for cooling purposes.
Unusual Fire and Explosion Hazards: Keep work areas free of hot metal surfaces and other source of ignition.
NFPA classification: Health: 2 Flammability: 1 Reactivity: 0
SECTION V: REACTIVITY DATA
Stability: Stable, will react with amines.
Incompatibility: Strong acids and bases, selected amines and oxidizing agents.
Hazardous Decomposition or Byproducts: Thermal decomposition in the presence of air may yield carbon monoxide,
carbon dioxide, phenolics, acids, aldehydes and other unidentified toxic and/or irritating compounds.
Hazardous Polymerization: Will not occur.
CP845 Skim/Scratch coating ?Part A
SECTION VI: HEALTH HAZARD DATA
Primary Routes of Entry:
EYES: May cause slight transient (temporary) eye irritation. Product may be irritating to the eyes.
SKIN: May cause allergic skin reaction in susceptible individuals. Prolonged exposure not likely to cause significant
skin irritation. Repeated exposure may cause skin irritation. A single prolonged exposure is not likely to result in the
material being absorbed through skin in harmful amounts.
INHALATION: Vapors are unlikely due to physical properties.
INGESTION: Single dose oral toxicity is low. No hazards anticipated from ingestion incidental to industrial exposure.
SYSTEMIC and OTHER EFFECTS: Except for skin sensitization, repeated exposures to low molecular weight epoxy
resins of this type are not anticipated to cause any significant adverse effects.
Carcinogenicity: Contains no ingredient listed as a potential carcinogen or as a carcinogen per OSHA, ACGIH, NTP or
IARC at concentrations equal to or greater than 0.1%.
California Proposition 65: This product is not known to contain any chemicals known by the State of California to cause
cancer or reproductive toxicity, at levels which would require a warning under the statute.
Emergency and First Aid Procedures:
EYES: Flush with large quantities of water for at least 15 minutes. Consult a physician.
SKIN: Wash thoroughly with soap and flowing water. Remove and wash contaminated clothing before reuse.
INHALATION: Remove to fresh air if effects occur. Consult a physician.
INGESTION: No adverse effects anticipated by this route of exposure incidental to proper industrial handling.
SECTION VII: PRECAUTIONS FOR SAFE HANDLING AND USE
Steps to Be Taken in Case Material is Released or Spilled: Keep sources of ignition and hot metal surfaces isolated
from the spill. Material may flow slowly. Scrape into containers for disposal.
Waste Disposal Methods: Dispose of according to all local, state and federal regulations.
Precautions to Be Taken in Handling and Storing: Keep containers closed when not in use. Avoid prolonged or
repeated contact with skin. DO NOT handle or store near flame, heat or strong oxidants. Do not store in direct sunlight.
Avoid prolonged storage above 38 deg C (100 deg F).
SECTION VIII: CONTROL MEASURES
RESPIRATORY: Respiratory protection should not be needed. If exposure may or does exceed occupational exposure
limits, respiratory irritation is experienced, or during spray application, use a properly fitted MSHA/NIOSH approved
respirator fitted with organic vapor cartridges. In addition, spray application may require the use of paint pre-filters. If
sanding or grinding on cured material, use above respirator fitted with HEPA filters or a dust mask.
VENTILATION: General mechanical ventilation is sufficient for most conditions. Local exhaust ventilation may be
necessary for some operations.
EYES: Use chemical safety glasses, splash-proof eye goggles or goggles with full faceshield.
CLOTHING/GLOVES: Use nitrile or other impermeable chemical resistant gloves to prevent skin irritation. If potential for
skin contact is present, wear impervious, long-sleeved, body covering clothing and rubber boots.
OTHER PROTECTIVE EQUIPMENT: The availability of eye washes and safety showers in work areas is recommended.
SECTION IX: TRANSPORT DATA
Proper Shipping Name: Not regulated
Hazard Class: Not regulated by D.O.T. regulations
Identification Number: None
Packing Group: None
SECTION X: DISCLAIMER
COHESANT MATERIALS MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO ANY
INFORMATION PRESENTED HEREIN, ALL OF WHICH IS PROVIDED "AS IS". TO THE MAXIMUM EXTENT
PERMITTED BY LAW, COHESANT MATERIALS EXPRESSLY EXCLUDES ALL WARRANTIES, OBLIGATIONS,
REPRESENTATIONS, LIABILITIES, TERMS AND CONDITIONS (WHETHER THEY ARE EXPRESS OR IMPLIED, OR
ARISE IN CONTRACT, STATUTE, OR OTHERWISE, AND IRRESPECTIVE OF THE NEGLIGENCE OF COHESANT
MATERIALS, ITS EMPLOYEES OR AGENTS) IN CONNECTION WITH THE INFORMATION PRESENTED HEREIN.
COHESANT MATERIALS MAKES NO REPRESENTATIONS OR WARRANTIES AS TO MERCHANTABILITY,
FITNESS FOR PURPOSE, NONINFRINGEMENT OR CONFORMITY WITH DESCRIPTION OR SAMPLE.
CP845 Skim/Scratch coating ?Part A
MATERIAL SAFETY DATA SHEET
Trade Name: ConcretePlusTM CP845 Skim/Scratch coating - Part B
SECTION I: COMPANY IDENTIFICATION
Company: Cohesant Materials Emergency Telephone #: 800-424-9300
st
13105 East 61 Street South, Suite A Chemtrec
Broken Arrow, OK 74012
Revision Date: 9/22/09 Information Telephone #: 918-615-0123
877-615-2648
SECTION II: INGREDIENT INFORMATION
INGREDIENT CAS NUMBER PERCENT PEL TLV
3 3
Amorphous Silicon Dioxide 7631-86-9 45 - 60% *80 mg/m *3 mg/m
Hydrogenated Polymer of Formaldehyde & Benzeneamine 135108-88-2 5 - 15% N/E N/E
Benzyl Alcohol 100-51-6 5 - 15% N/E N/E
Alkylphenol 84852-15-3 5 - 15% N/E N/E
Aminoethylpiperazine 140-31-8 1 - 10% N/E N/E
3
Carbon Black 1333-86-4 <0.01% *3.5 mg/m N/E
N/E indicates "not established"
SARA Title III, Section 313 ingredients: None All ingredients are TSCA inventory listed.
*Note: The PEL & TLV exposure limits for this ingredient are for respirable dust levels. In this product, it is pre-dispersed
and not available as a dust. Therefore, under normal use conditions it would not be considered a hazard.
The specific identity, percent and/or remaining ingredient(s) are being withheld as a trade secret per 29 CFR 1910.1200.
SECTION III: PHYSICAL DATA
Boiling Point: > 200 deg F Specific Gravity: 1.2 - 1.5
Vapor Pressure: Not determined Melting Point: Not determined
Vapor Density: Not determined Evaporation Rate: Not determined
Solubility in Water: Neglibible % Volatile by Volume: <1%
Appearance and Odor: Heavy paint consistency ?slight ammonia odor
SECTION IV: FIRE & EXPLOSION HAZARD DATA
Flash Point: >200 deg F, TCC Method OSHA/NFPA Fire Hazard Classification: Class III B
Extinguishing Media: Foam, CO2, Dry Chemical, Water Spray LFL: Not determined UFL: Not determined
Special Fire Fighting Procedures: The use of self-contained breathing apparatus is recommended for firefighters.
Water may be helpful in keeping adjacent containers cool.
Unusual Fire and Explosion Hazards: Keep work areas free of hot metal surfaces and other source of ignition.
NFPA classification: Health: 2 Flammability: 1 Reactivity: 0
SECTION V: REACTIVITY DATA
Stability: Stable
Incompatibility: Strong acids and bases, selected epoxy resins and strong oxidizing agents.
Hazardous Decomposition or Byproducts: Thermal decomposition in the presence of air may yield carbon monoxide,
carbon dioxide, ammonia, aldehydes, ketones, nitrogen oxides and other unidentified toxic and/or irritating compounds.
Hazardous Polymerization: Will not occur.
CP845 Skim/Scratch coating ?Part B
SECTION VI: HEALTH HAZARD DATA
Primary Routes of Entry:
EYES: Severe eye irritant. May cause burns. Vapors may be irritating.
SKIN: Moderate skin irritant. May cause injury to skin following prolonged or repeated contact. Repeated exposure
may cause sensitization of the individual.
INHALATION: Vapors/mists may be irritating to the upper respiratory tract. Repeated or prolonged exposure may
result in lung damage. May cause respiratory tract sensitization.
INGESTION: Not expected to be a relevant route of exposure. However, the material may cause damage to the
mouth, throat and stomach.
SYSTEMIC and OTHER EFFECTS: Product can be alkaline, corrosive and irritating to skin, ears, eyes and mucous
membranes. May cause injury upon prolonged or repeated contact.
Carcinogenicity: Based on the IARC conclusion that there is sufficient evidence in experimental animals for the
carcinogenicity of inhaled carbon black dust and inadequate evidence of carcinogenicity in humans; IARC's overall
evaluation is that carbon black dust is a possible human carcinogen (Group 2B). This product contains carbon black in a
"wet out" form and does not pose an inhalation hazard. Good hygiene practices should be followed to minimize exposure
to any respirable dusts. The IARC's findings were consistent with the massive accumulation of fine dust particles in the
lung which overwhelm the natural lung clearance mechanisms, known as the "lung overload" phenomenon, rather than
from a specific chemical effect from the carbon black dust particle in the lung. Carbon black has not been listed as a
carcinogen by OSHA or the NTP. NIOSH recommends that only carbon blacks with a PAH level greater than 0.1% be
considered suspect carcinogens.
California Proposition 65: This product contains carbon black, a chemical known by the State of California to cause
cancer or reproductive toxicity, which requires a warning under the statute.
Emergency and First Aid Procedures:
EYES: Flush with large quantities of water for at least 15 minutes. Seek immediate medical attention.
SKIN: Wash immediately with soap and water. If irritation or sensitization occurs, remove individual from further
contact with material. Remove and wash contaminated clothing before reuse.
INHALATION: Remove to fresh air if effects occur. Consult a physician.
INGESTION: If this product is swallowed, administer 3-4 glasses of water. Do not induce vomiting. Seek medical
advice.
SECTION VII: PRECAUTIONS FOR SAFE HANDLING AND USE
Steps to Be Taken in Case Material is Released or Spilled: Keep sources of ignition and hot metal surfaces isolated
from the spill. Material may flow slowly. Scrape into containers for disposal.
Waste Disposal Methods: Dispose of according to all local, state and federal regulations.
Precautions to Be Taken in Handling and Storing: Keep containers closed when not in use. Avoid breathing vapors
and prolonged or repeated contact with skin. DO NOT handle or store near flame, heat or strong oxidants. Do not store in
direct sunlight. Avoid prolonged storage above 38 deg C (100 deg F).
SECTION VIII: CONTROL MEASURES
RESPIRATORY: Respiratory protection should not be needed. If exposure may or does exceed occupational exposure
limits, respiratory irritation is experienced, or during spray application, use a properly fitted MSHA/NIOSH approved
respirator fitted with ammonia & methylamine cartridges. In addition, spray application may require the use of paint pre-
filters. If sanding or grinding on cured material, use above respirator fitted with HEPA filters or a dust mask.
VENTILATION: General mechanical ventilation is sufficient for most conditions. Local exhaust ventilation may be
necessary for some operations.
EYES: Use chemical safety glasses, splash-proof eye goggles or goggles with full faceshield.
CLOTHING/GLOVES: Use nitrile or other impermeable chemical resistant gloves. If potential for skin contact is present,
wear impervious, long-sleeved, body covering clothing and rubber boots.
OTHER PROTECTIVE EQUIPMENT: The availability of eye washes and safety showers in work areas is recommended.
SECTION IX: TRANSPORT DATA
Proper Shipping Name: Not regulated
Hazard Class: Not regulated by D.O.T. regulations
Identification Number: None
Packing Group: None
SECTION X: DISCLAIMER
COHESANT MATERIALS MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO ANY
INFORMATION PRESENTED HEREIN, ALL OF WHICH IS PROVIDED "AS IS". TO THE MAXIMUM EXTENT
PERMITTED BY LAW, COHESANT MATERIALS EXPRESSLY EXCLUDES ALL WARRANTIES, OBLIGATIONS,
REPRESENTATIONS, LIABILITIES, TERMS AND CONDITIONS (WHETHER THEY ARE EXPRESS OR IMPLIED, OR
ARISE IN CONTRACT, STATUTE, OR OTHERWISE, AND IRRESPECTIVE OF THE NEGLIGENCE OF COHESANT
MATERIALS, ITS EMPLOYEES OR AGENTS) IN CONNECTION WITH THE INFORMATION PRESENTED HEREIN.
COHESANT MATERIALS MAKES NO REPRESENTATIONS OR WARRANTIES AS TO MERCHANTABILITY,
FITNESS FOR PURPOSE, NONINFRINGEMENT OR CONFORMITY WITH DESCRIPTION OR SAMPLE.
CP845 Skim/Scratch coating ?Part B
|