Anionic Emulsion
Solve 9395
Material Safety Data Sheet Date Issued: June, 2002
Date Revised: May 4, 2006
.
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: SOLVE 9395
CHEMICAL TYPE: Anionic emulsion polymer.
COMPANY: WaterSolve, LLC, 4964 Starr St. SE, Grand Rapids, MI 49546, USA
For Product information call 616-575-8693.
2. COMPOSITION/INFORMATION ON INGREDIENTS
Cas# Component Percent
25085-02-3 2-Propenoic acid, sodium salt, polymer with 2-propenamide 30-40
64742-47-8 Petroleum distillates, hydrotreated light 20-30
68551-13-3 Poly(oxy-1,2-ethanediyl, -(4-nonylphenol)--hydroxy-, branched 1-3
Component Information/Information on Non-Hazardous Components
All Components are listed on TSCA (40CFR 700) OSHA classifies this product as an irritant under 29
CFR 1910.1200.
3. HAZARDS IDENTIFICATION
Emergency Overview: Irritant to eyes and skin. OSHA classifies this product as an irritant
Under 29 CFR1910.1200.
Potential Health Effects Eyes: Irritant to eyes.
Potential Health Effects Skin: Irritant to the skin.
Potential Effects Ingestion: May be harmful if swallowed. Seek medical attention. This material
Can get into lungs during swallowing or vomiting. This results in
lung inflammation and other lung injury.
Potential Effects Inhalation: Avoid prolonged inhalation of heated and/or concentrated vapors.
HMIS Ratings: Health: 1 Fire: 1 Reactivity: 0 Personal Protection: B
Hazard Scale: 0=minimal 1=slight 2=moderate 3=serious 4=severe *=chronic hazard
4. FIRST AID MEASURES
Inhalation of mists into lungs may cause pulmonary disorder. Move victim to fresh air.
Inhalation:
Consult physician regarding any continuing discomfort.
Flush thoroughly with water.
Skin Contact:
Immediately flush eyes with water for at least 15 minutes, while holding eyelids open.
Eye Contact:
Consult a physician.
If ingested get immediate medical attention. Do not induce vomiting unless instructed to
Ingestion:
do so by medical personnel.
Solve 9395
Page 2 of 5
5. FIRE FIGHTING MEASURES
Petroleum hydrocarbon component, if separated from product, is
General Fire Hazards:
combustible. Vapors can ignite under certain conditions, explosively.
Flash point of product is >200癋.
Hazardous combustion products: On thermal decomposition oxides of carbon and nitrogen.
Dry chemical, foam, carbon dioxide (CO2), water fog.
Suitable extinguishing media:
Protective equipment for firefighters:
Full protective clothing including self contained breathing apparatus.
NFPA Ratings: Health: 1 Fire: 1 Reactivity: 0
Hazard Scale: 0=minimal 1=slight 2=moderate 3=serious 4=severe
6. ACCIDENTAL RELEASE MEASURES
Isolate area. Keep unnecessary personnel away.
Evacuation procedures:
Absorb spill with inert material. Shovel material into appropriate
Containment Procedures:
container for disposal. Wear protective gear during cleanup.
Do not allow spills to enter sol or surface water. Absorb spill with inert
Methods for cleaning up:
material. Shovel material into appropriate container for disposal.
Remove sources of ignition.
Remove spills promptly as they may make floors slippery. Several
Special procedures:
washes and/or the use of detergents may be necessary to completely
clean any spill. Avoid skin contact and inhalation of vapors during
disposal of spills. Wear appropriate protective equipment and clothing
during clean-up. Follow all local, state and federal and provincial
regulations for disposal.
7. HANDLING AND STORAGE
Handle as an eye and respiratory tract irritant.
Handling:
Store in dry, closed container.
Storage:
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Component Exposure Limits
Petroleum distillates, hydrotreated light (64742-47-8)
ACGIH: 200 mg/m3 TWA application restricted to conditions in
which there are negligible aerosol exposures
Provide adequate ventilation to minimize worker exposure.
Engineering controls:
Personal protection equipment
Not required under normal operating conditions.
Respiratory protection:
Impervious gloves (rubber or neoprene) are recommended.
Hand Protection:
Safety glasses or goggles.
Eye protection:
Skin contact should be minimized. Impervious gloves are
Skin protection:
recommended.
Solve 9395
Page 3 of 5
Avoid prolonged inhalation of heated vapors. Obey reasonable safety
Hygiene measures:
precautions and practice good housekeeping. Wash thoroughly after
handling.
9. PHYSICAL AND CHEMICAL PROPERTIES
Form: milky white liquid
Color: white
Odor: mild hydrocarbon odor
pH: N/E
Solubility (H2O): Emulsion-slightly soluble in water
Evaporation Rate: <1 (butyl acetate=1)
Melting Point (oC): N/A
Vapor density: N/E
Specific Gravity: ~1 (water=1)
Flash Point: >200癋 (PMCC)
Upper Flammable Limit N/D
Lower Flammable Limit N/D
Flammability Classification N/D
Auto Ignition N/D
10. STABILITY AND REACTIVITY
Stable under usual application conditions.
Stability:
None identified.
Hazardous Decomposition Products:
Strong oxidizers.
Incompatibility:
Will not occur.
Hazardous Polymerization:
11. TOXICOLOGICAL INFORMATION
Eye and skin irritant. May aggravate existing medical conditions such
Acute and chronic toxicity:
as rashes, allergies, or other sensitive areas. Symptoms may include
reddening, swelling of affected areas with possible itching, burning or
other discomfort.
Acute Toxicity-LD50/LC50
Petroleum distillates, hydro treated light (64742-47-8)
Inhalation Rat: >5.2 mg/L/4H: Oral Rat: >5000 mg/kg; Dermal Rabbit: >2000mg/kg
LD50
Carcinogenicity:
NTP: No
IARC: No
OSHA: No
Components Carcinogenicity:
No information is available.
LC50 Cer;iodaphnia dubia
Chronic Toxicity:
48 hours 11.0 ppm
LC50 Pimphales promelas
48 hours 31.4 ppm
Solve 9395
Page 4 of 5
12. ECOLOGICAL INFORMATION
Ecotoxicity:
General Product Information: C.O.D.: 2,176,000 mg/l
B.O.D.: 548,000 mg/l
Component Analysis 璄cotoxicity - Aquatic Toxicity
Petroleum distillates, hydro treated light (64742-47-8)
96 hr LC50 pimephales promelas: 45 mg/L [flow-through]; 96 hr LC50 Lepomis macrochirus: 1740 mg/L
[static]
N/E
Environmental Fate:
13. DISPOSAL CONSIDERATIONS
US EPA Waste Number & Descriptions
General Product Information:
Incinerate or dispose of solidified product according to local, state, and federal
regulations.
Component Waste Numbers:
No EPA Waste Numbers are applicable for this product's components.
Disposal Instructions:
Contain and collect using absorbent material if needed. Flush residuals to drain for
normal biological treatment. Place collected material into suitable containers for proper
disposal.
14. TRANSPORT INFORMATION
This product is not regulated as a hazardous material by the United States (DOT) or Canadian (TDG)
transportation regulations.
15. REGULATORY INFORMATION
US Federal Regulations
General Product Information
SARA 313 reportable toxic chemicals - None.
No information is available.
Clean Air Act:
No information is available.
Component Analysis:
Food and Drug Administration: None of the components in this product are listed by the FDA under
regulations for direct and indirect food additives.
This product contains <0.05% residual acrylamide (CAS#79-06-1),
Component Analysis ?State:
And the following states recognize acrylamide as a carcinogen or
suspected carcinogen: CA (Prop 65), MA, MN, NJ & PA
California Proposition 65 The following statement is made in order to comply with the California
Safe Drinking Water and Toxic enforcement Act of 1986:
This product contains the following substance(s) known to the state of
California to cause cancer:
Component CAS#
1,4 璂ioxane 123-91-1
Acetaldehyde 75-07-0
Formaldehyde 50-00-0
Ethylene oxide 75-21-8
Solve 9395
Page 5 of 5
New Jersey RTK Label Information
1,4 璂ioxane 123-91-1
Acetaldehyde 75-07-0
Formaldehyde 50-00-0
Ethylene oxide 75-21-8
Pennsylvania RTK Label Information
1,4 璂ioxane 123-91-1
Acetaldehyde 75-07-0
Formaldehyde 50-00-0
Ethylene oxide 75-21-8
Component Analysis ?WHMIS IDL
No componets are listed in the WHMIS IDL.
Component Analysis ?Inventory
Component CAS# TSCA CAN EEC
2-Propenoic acid, potassium salt, polymer 25608-12-2 Yes DSL No
Petroleum distillates, hydrotreated light 64742-47-8 Yes DSL EINECES
Poly(oxy-1,2-ethanediyl, -(4-nonylphenol)-- 127087-87-0 Yes DSL No.
hydroxy-, branched
16. OTHER INFORMATION
Reasonable care has been taken in the preparation of this information, but the manufacturer makes no
warranty of merchantability or any other warranty, expressed or implied, with respect to this information.
The manufacturer makes no representations and assumes no liability for any direct, incidental or
consequential damages resulting from its use.
This information is for the specific material described only and may not be valid if the material is used in combination with any other
materials or in any process. The user is responsible to determine the completeness of the information and suitability for the user's
own particular use. The knowledge and belief of WaterSolve, LLC, the information is accurate and reliable as of the date indicated
but WaterSolve, LLC makes no express or implied warranty of merchantability for the material or the information.
|