Page 1 / 5
SAFETY DATA SHEET
KILPI roof coating
Date 24.3.2009 Previous date: 15.8.2005
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/
UNDERTAKING
1.1 Identification of the article
1.1.1 Commercial Product Name
KILPI roof coating
1.1.2 Product code
741 -series
1.2 Use of the Substance/Preparation
1.2.1 Intended use
Painting work.
Description: Water-borne coating with modified acrylate dispersion.
1.3 Identification of the company
1.3.1 Supplier
Tikkurila Oy
1.3.2 Contact information:
P.O.Box P.O.Box 53
Postcode and post office FI-01301 VANTAA
FINLAND
Telephone +358 9 857 71
Telefax +358 9 8577 6936
1.3.4 Responsible for the Safety Data Sheet:
Tikkurila Oy, Product Safety, e-mail: productsafety@tikkurila.com
1.4 Emergency telephone number
1.4.1 Telephone number, name and address
Tikkurila Oy, Environment and Safety: +358 9 857 71
2. HAZARDS IDENTIFICATION
Irritant; Xi.
May cause sensitization by skin contact. Harmful to aquatic organisms, may cause long-term adverse effects
in the aquatic environment.
Information on hazard labelling in section 15.1.
3. COMPOSITION/INFORMATION ON INGREDIENTS
3.1 Hazardous components
3.1.1 3.1.2 3.1.3 3.1.4
CAS number EINECS Chemical name of the Concentration Classification
substance
14808-60-7 238-878-4 Quartz 5 - 10 % Xn; R48/20
1314-13-2 215-222-5 Zinc oxide 1 - 2,5 % N; R50/53
107-98-2 203-539-1 1-Methoxy-2-propanol 1-5% -; R10
26530-20-1 247-761-7 2-Octyl-2H-isothiazol-3-one < 0,2 % T, N; R22-23/24-34-43-50/53
4. FIRST AID MEASURES
4.1 Additional advice
In all cases of doubt, or when symptoms persist, seek medical attention.
4.2 Inhalation
Remove to fresh air, keep patient warm and at rest.
4.3 Skin contact
Remove contaminated clothing. Wash skin thoroughly with soap and water or use recognized skin cleanser.
Page 2 / 5
SAFETY DATA SHEET
KILPI roof coating
Date 24.3.2009 Previous date: 15.8.2005
4.4 Eye contact
Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart and seek medical
advice.
4.5 Ingestion
If accidentally swallowed obtain immediate medical attention. Keep at rest. DO NOT induce vomiting.
5. FIRE-FIGHTING MEASURES
5.1 Suitable extinguishing media
---
5.2 Extinguishing media which must not be used for safety reasons
Waterjet
5.3 Specific hazards
Fire will produce dense black smoke, which contains decomposition products. Avoid breathing the smoke.
6. ACCIDENTAL RELEASE MEASURES
6.1 Personal precautions
Avoid skin contact with the product.
6.2 Environmental precautions
Do not allow to enter drains or water courses.
6.3 Methods for cleaning up
Contain and collect spillage with non-combustible absorbent materials, e.g. sand or vermiculite and place in a
container for disposal according to local regulations. Clean preferably with a detergent; avoid the use of
solvents.
7. HANDLING AND STORAGE
7.1 Handling
Good ventilation must be provided. Keep away from sources of ignition. Take precautionary measures against
static discharges.
7.2 Storage
Keep containers tightly closed. Store in a cool, dry, well ventilated place away from sources of heat and direct
sunlight.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
8.1 Exposure Limit Values
8.1.1 Occupational exposure limit values
1-Methoxy-2-propanol 100 ppm (8 h)
0,025 mg/m3 (8 h)
Quartz
2 mg/m3 (8 h)
Zinc oxide
8.1.2 Information on limit values
TLV-TWA = Threshold Limit Values - Time-weighted average / ACGIH 2008
8.2 Exposure controls
8.2.1 Occupational exposure controls
Provide adequate ventilation. Comply with the health and safety at work laws.
8.2.1.1 Respiratory protection
Use appropriate certified respirators, with gas and vapour filter A, during sanding with dust filter P2, if ventilation
is insufficient. During spray-application use respirators with gas, vapour and dust filter AP. During continuous
and long-term work the use of air-fed or motor-driven respirators is recommended.
Page 3 / 5
SAFETY DATA SHEET
KILPI roof coating
Date 24.3.2009 Previous date: 15.8.2005
8.2.1.2 Hand protection
Always wear approved protective gloves (e.g. nitrile rubber) against chemicals. Barrier creams may also help to
protect the exposed areas of the skin.
8.2.1.3 Eye protection
Safety eyewear must be used, specially during spray-application.
8.2.1.4 Skin and body protection
Use suitable protective clothing.
9. PHYSICAL AND CHEMICAL PROPERTIES
9.1 General Information (appearance, odour)
Coloured, viscous liquid
9.2 Important Health Safety and Environmental Information
9.2.2 Boiling point/range -
-
9.2.3 Flash point
9.2.5 Explosive properties
9.2.5.1 Lower explosion limit -
9.2.5.2 Upper explosion limit -
9.2.7 Vapour pressure -
9.2.8 Relative density 1,3 - 1,4
9.2.9 Solubility
9.2.9.1 Water solubility Soluble
10. STABILITY AND REACTIVITY
10.1 Conditions to avoid
---
10.2 Materials to avoid
---
10.3 Hazardous decomposition products
Fire will produce dense black smoke. Exposure to decomposition products may cause a health hazard.
11. TOXICOLOGICAL INFORMATION
11.1 Acute toxicity
See section 11.5.
11.2 Primary irritation
See section 11.5.
11.3 Sensitisation
May cause sensitization by skin contact.
11.5 Human experience
11.5.1 Inhalation: Spray mist causes irritation of mucous membranes of nose and throat and respiratory
system.
11.5.2 Skin contact: Spray mist and splashes may cause skin and eye irritation.
11.5.3 Other effects: Harmful if taken internally.
12. ECOLOGICAL INFORMATION
12.1 Ecotoxicity
12.1.1 Aquatic toxicity
Zinc oxide: EC50 = 0,17 mg/l, selenastrum capricornutum, 72 h; very toxic.
Page 4 / 5
SAFETY DATA SHEET
KILPI roof coating
Date 24.3.2009 Previous date: 15.8.2005
12.6 Other adverse effects
There is no data available on the preparation itself. The product should not be allowed to enter drains or water
courses.
13. DISPOSAL CONSIDERATIONS
13.1 Product residues: Gather residues into waste containers. Destroy according to the rules given by local
authorities. EWC-code for liquid waste is e.g 08 01 11 (waste paint and varnish containing organic solvents or
other dangerous substances).
13.2 Packaging: Empty cans should be recycled or disposed of in accordance with local regulations.
14. TRANSPORT INFORMATION
14.1 UN No -
14.2 Packing group -
14.3 Land transport
14.3.1 ADR/RID Class not classified
14.4 Sea transport
14.4.1 IMDG Class not classified
14.5 Air transport
14.5.1 ICAO/IATA Class not classified
15. REGULATORY INFORMATION
15.1 Information on the warning label
15.1.1 Letter code of the warning symbol and indications of danger for the preparation
Xi Irritant
15.1.2 Names of the ingredients given on the warning label
2-Octyl-2H-isothiazol-3-one
Zinc oxide
15.1.3 R-phrase(s)
R43 May cause sensitization by skin contact.
R52/53 Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic
environment.
15.1.4 S-phrase(s)
S2 Keep out of the reach of children.
S24 Avoid contact with skin.
S29 Do not empty into drains.
S37 Wear suitable gloves.
S46 If swallowed, seek medical advice immediately and show this container or label.
16. OTHER INFORMATION
16.1 Full text of R-phrases referred to under sections 2 and 3
R48/20 Harmful: danger of serious damage to health by prolonged exposure through inhalation.
R43 May cause sensitization by skin contact.
R52/53 Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic
environment.
R10 Flammable.
R22 Harmful if swallowed.
R23/24 Toxic by inhalation and in contact with skin.
R34 Causes burns.
R50/53 Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic
environment.
Page 5 / 5
SAFETY DATA SHEET
KILPI roof coating
Date 24.3.2009 Previous date: 15.8.2005
16.4 Additional information
The information of this MSDS is based on the present state of our knowledge and on current EC laws. It is
meant as a description of the safety requirements of our product: it is not to be considered as a guarantee of
the products' properties.
Additional information available from: Tikkurila Oy, Product Safety, P.O. Box 53, FIN-01301 VANTAA,
FINLAND, Telephone +358 9 857 71, Fax +358 9 8577 6936, E-mail: productsafety@tikkurila.com
Signature f0/ars
|