Material Safety Data Sheet CS: 1.4.21
Page: 1 of 3
Infosafe NoTM 1HAVW Issue Date :June 2010 CS: 1.4.21
RE-ISSUED by HAYMES
Product Name DESIGNER FINISHES SPECIAL PAINT WHITE
Not classified as hazardous according to criteria of NOHSC
COMPANY DETAILS
HAYMES PAINT
Company Name
P.O Box 167 WENDOUREE
Address
VICTORIA 3355 Australia
Tel: 03 5342 6200 . Office Hours : 7-30 to 5-30 Monday to Friday
Tel/Fax
IDENTIFICATION
DFSPW
Product Code
DESIGNER FINISHES SPECIAL PAINT WHITE
Product Name
Name Product Code
Other Names
MAGIC PAINT WHITE
SPECIAL PAINT WHITE
Not Scheduled
Poisons Schedule
As a high quality water based paint for painted finish work.
Product Use
Physical Data
White viscous liquid.
Appearance
Not Available
Melting Point
Initial boiling point 100癈
Boiling Point
As for water.
Vapour Pressure
Approx. 1.5
Specific Gravity
Not applicable; water based paint.
Flash Point
Not applicable
Flamm. Limit LEL
Not applicable
Explosion Data
Other Properties
Approximately 60%
Volatile Component
Approx. 1
Vapour Density
8 - 10
pH Value
Liquid
Form
Emulsifiable mixture.
Other Information
Ingredients
Name CAS Proportion
Ingredients
Extenders,defoame PROPRIETARY 50-60 %
r,dispersant and
thickeners
Water 7732-18-5 20-30 %
Copolymer PROPRIETARY 10-20 %
dispersions
C.I. Pigment 13463-67-7 5-15 %
White 6.
Mono ethylene 107-21-1 1-10 %
glycol
Amino methyl 124-68-57 0-1 %
propanol
Water based paint consisting of copolymer dispersions plus pigment,
Other Information
extenders, dispersants, defoamers and a bactericide.
HEALTH HAZARD INFORMATION
Print Date: 4/06/2010 CS: 1.4.21
Material Safety Data Sheet CS: 1.4.21
Page: 2 of 3
Infosafe NoTM 1HAVW Issue Date :June 2010 CS: 1.4.21
RE-ISSUED by HAYMES
Product Name DESIGNER FINISHES SPECIAL PAINT WHITE
Not classified as hazardous according to criteria of NOHSC
Health Effects
No adverse effects expected due to swallowing of small amounts incidental
Acute - Swallowed
to industrial handling. Ingestion of large amounts should be treated with
caution and medical advice sought.
May cause slight eye irritation.
Acute - Eye
Repeat or prolonged contact with skin may lead to irritation.
Acute - Skin
No adverse effects anticipated by this route of exposure due to low vapour
Acute - Inhaled
pressure. However it is good work practice to avoid prolonged inhalation of
the vapours which may cause slight irritation of nose and respiratory tract.
No information available for this product.
Chronic
First Aid
Rinse mouth with water. Give plenty of water to drink. Do not
Swallowed
induce vomiting. Seek medical advise if adverse effects occur.
Irrigate eye with copious quantities of water for at least 15 minutes. Hold
Eye
eyelids open. In all cases of eye contamination, it is a sensible
precaution to seek medical advice.
Wash contaminated skin with plenty of water and soap. Remove heavily
Skin
contaminated clothing and launder before re-use. Seek medical advice if
irritation develops.
Remove to fresh air. Allow patient to assume most comfortable position,
Inhaled
keep warm and at rest until fully recovered. Seek medical advice if
symptoms persist.
Normal washroom facilities.
First Aid Facilities
Advice to Doctor
No specific antidote. Supportive care. Treat symptomatically.
Advice to Doctor
Other Health Hazard Information
PRECAUTIONS FOR USE
None established for this product by Worksafe Australia. However exposure
Exposure Limits
standard data exists for minor components of the water based paint
Workplace Exposure Standards (WES)# are:
vinyl acetate (residual monomer of resin, at < 0.2% w/w):
10 ppm TWA; 20 ppm STEL
mon ethylene glycol: 60mg/m3 TWA; 120mg/m3 STEL
Paint also contains talc, calcium carbonate (chalk, whiting), titanium
dioxide (C.I. Pigment White 6), clay and silica, each of which has a WES,
but solids are bound into the paint and as such the applicable standards
are not relevant.
Use in a well ventilated area only.
Eng. Controls
No other relevant information.
Other Information
Personal Protection
Avoid skin and eye contact. Wear clean body-covering clothing, impervious
Protective Equip.
gloves that provide a water barrier and wear safety glasses with side
shields. No respiratory protection required under normal conditions of use.
Wash hands thoroughly before eating or drinking.
Flammability
Not combustible as supplied.
Fire Hazards
SAFE HANDLING INFORMATION
Storage and Transport
Not classified as Dangerous Goods, according to the Australian Code for the
Transport
Transport of Dangerous Goods by Road and Rail.
Print Date: 4/06/2010 CS: 1.4.21
Material Safety Data Sheet CS: 1.4.21
Page: 3 of 3
Infosafe NoTM 1HAVW Issue Date :June 2010 CS: 1.4.21
RE-ISSUED by HAYMES
Product Name DESIGNER FINISHES SPECIAL PAINT WHITE
Not classified as hazardous according to criteria of NOHSC
Not classified as a dangerous good for transport by road or rail in the
Storage and
Australian Dangerous Goods Code.
Transport
Store in a cool place out of direct sunlight. Keep containers closed when
not in use.
Read the use instructions on the label and observe recommendations.
Other Storage Info.
Spills and Disposal
SPILLAGE: Contain using sand, earth or other inert material. Prevent
Spills & Disposal
contamination of sewers, drains and waterways. Wear suitable protective
equipment to prevent skin and eye contamination. Collect wastes with
suitable absorbent (sand, earth or vermiculite) and store in sealable,
labelled containers for disposal.
DISPOSAL: Dispose of waste in accordance with Local, State and Federal EPA
waste regulations. Normally suitable for disposal to an approved landfill.
Wash residues from contaminated area with copious quantities of water.
Fire/Explosion Hazard
Product is water based emulsion and will not burn. Dried resin may burn.
Fire/Explos. Hazard
EXTINGUISHING MEDIA: Use foam carbon dioxide or water fog to extinguish
burning dried resin.
Stable at normal conditions. Addition of chemicals and freezing
Hazardous Reaction
temperatures may cause coagulation.
OTHER INFORMATION
No acute or chronic toxicity data available for this product.
Toxicology
If recommended precautions for handling and use are adhered to no adverse
effects are anticipated. Trace residual monomers in the polymer emulsion
are not considered to present a significant hazard under normal work
practices and conditions.
No data available for this formulation.
Environ. Protection
May be harmful to aquatic life. Avoid contamination of waterways, drains or
sewers. Dilution in water will make the water milky and possibly solids in
the paint will seperate and sink to bottom of system.
No specific requirements with respect to dangerous goods regulations,
Pkg. & Labelling
workplace OH & S regulations or poisonous substances control regulations.
Paint conforms with the Uniform paint Standard, Schedule 'P' of SUSDP.
N/A.
Regulatory
Information
When surfaces, previously sealed with this coating or similar coatings
Manufacturers
containing titanium dioxide and/or talc and/or calcium carbonate and/or
Advice
diatomaceous earth, are prepared by dry sanding or dry blasting techniques
it is recommended that an air-purifying (dust) respirator be worn to
control the inhalable dust concentrations to less than the recommended
Workplace Exposure Standards published by Worksafe Australia (See reference
below). For some operations local exhaust ventilation may be required to
meet this level of control.
'Standard for the Uniform Scheduling of Drugs and Poisons' National Health
References
and Medical Research Council as amended.
'Exposure Standards for Atmospheric Contaminants in the Occupational
Environment' Worksafe Australia Standard, May 1995.
N/A.
Other Information
CONTACT POINT
...End Of MSDS...
?Copyright ACOHS Pty Ltd
Copyright in the source code of the HTML, PDF, XML, XFO and any other electronic files rendered by an Infosafe system for Infosafe MSDS displayed on this site is the
intellectual property of Acohs Pty Ltd.
Copyright in the layout, presentation and appearance of each Infosafe MSDS displayed on this site is the intellectual property of Acohs Pty Ltd.
The compilation of MSDS's displayed on this site is the intellectual property of Acohs Pty Ltd.
Copying of any MSDS displayed on this site is permitted for personal use only and otherwise is not permitted. In particular the MSDS's displayed on this site cannot be
Print Date: 4/06/2010 CS: 1.4.21
|