1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND THE COMPANY
Product name ULTRACURE
Company Wykamol Group Limited
Unit 3, Boran Court
Network 65 Business Park
Hapton, Burnley
Lancashire. BB11 5TH
sales@wykamol.com www.wykamol.com
Telephone 0845 400 6666
Emergency telephone 0845 400 6666
number
3. HAZARDS IDENTIFICATION
Main hazards No significant hazard.
4. FIRST AID MEASURES
Skin contact May cause irritation to skin. Wash off immediately with plenty of soap and water.
Remove contaminated clothing. Seek medical attention if irritation or symptoms persist.
Eye contact May cause irritation to eyes. Rinse immediately with plenty of water for 15 minutes
holding the eyelids open. Seek medical attention if irritation or symptoms persist.
Inhalation May cause irritation to mucous membranes. Move the exposed person to fresh air.
Ingestion May cause irritation to mucous membranes. DO NOT INDUCE VOMITING. Seek
medical attention if irritation or symptoms persist.
5. FIRE FIGHTING MEASURES
Extinguishing media Use extinguishing media appropriate to the surrounding fire conditions.
Fire hazards Burning produces irritating, toxic and obnoxious fumes.
Protective equipment Wear suitable respiratory equipment when necessary.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions Ensure adequate ventilation of the working area.
Environmental precautions Do not allow product to enter drains. Prevent further spillage if safe.
Clean up methods Sweep up. Transfer to suitable, labelled containers for disposal. Clean spillage area
thoroughly with plenty of water.
Print date 17-Feb-2009
Page 2 of 3
ULTRACURE
Revision 0
Revision date 17-Feb-2009
7. HANDLING AND STORAGE
Handling Avoid contact with eyes and skin. Ensure adequate ventilation of the working area.
Adopt best Manual Handling considerations when handling, carrying and dispensing.
Storage Keep in a cool, dry, well ventilated area. Keep containers tightly closed. Store in
correctly labelled containers. Store above 5癈.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure limits
Mono ethylene glycol WEL 8-hr limit ppm: 20 WEL 8-hr limit mg/m3: 52
(Ethane-1,2-diol vapour) WEL 15 min limit ppm: 40 WEL 15 min limit mg/m3: 104
Mono ethylene glycol WEL 8-hr limit ppm: - WEL 8-hr limit mg/m3: 10
(Ethane-1,2-diol particulate) WEL 15 min limit ppm: - WEL 15 min limit mg/m3: -
Engineering measures Ensure adequate ventilation of the working area.
Hand protection Chemical resistant gloves (PVC)
Eye protection In case of splashing, wear: Approved safety goggles.
Protective equipment Wear protective clothing.
9. PHYSICAL AND CHEMICAL PROPERTIES
Description Paste.
Colour White.
Flash point >100癈
Relative density 0.8 - 0.9
Water solubility miscible in water.
Autoignition temperature Product is not self igniting
10. STABILITY AND REACTIVITY
Stability Stable under normal conditions.
11. TOXICOLOGICAL INFORMATION
Toxicological information
12. ECOLOGICAL INFORMATION
Ecotoxicity The unused product is a minor water pollutant. Large quantities may be toxic to fish. Do
not empty into drains.
13. DISPOSAL CONSIDERATIONS
General information Dispose of in compliance with all local and national regulations.
Disposal methods Contact a licensed waste disposal company. For disposal within the EC, the appropriate
code according to the European Waste Catalogue (EWC) should be used.
Disposal of packaging Empty containers can be sent for disposal or recycling.
14. TRANSPORT INFORMATION
Further information The product is not classifed as dangerous for carriage.
Print date 17-Feb-2009
Page 3 of 3
ULTRACURE
Revision 0
Revision date 17-Feb-2009
15. REGULATORY INFORMATION
Risk phrases R22 - Harmful if swallowed.
16. OTHER INFORMATION
Text of risk phrases in R10 - Flammable.
Section 2 R22 - Harmful if swallowed.
R52/53 - Harmful to aquatic organisms, may cause long-term adverse effects in the
aquatic environment.
Further information The information supplied in this Safety Data Sheet is designed only as guidance for the
safe use, storage and handling of the product. This information is correct to the best of
our knowledge and belief at the date of publication however no guarantee is made to its
accuracy. This information relates only to the specific material designated and may not
be valid for such material used in combination with any other materials or in any other
process.