Material Safety Data Sheet
Section 1: Product & Company Identification
Product Name: Marine Heavy Duty Corrosion Inhibitor (Aerosol)
Product Number (s): 06026
Manufactured By:
CRC Industries, Inc. General Information (215) 674-4300
885 Louis Drive Technical Assistance (800) 521-3168
Warminster, PA 18974 Customer Service (800) 272-8963
www.crcindustries.com 24-Hr Emergency (CHEMTREC) (800) 424-9300
Section 2: Hazards Identification
Emergency Overview
Appearance & Odor: Dark amber viscous liquid with petroleum odor
DANGER
Extremely flammable. Harmful or fatal if swallowed. Contents under pressure.
As defined by OSHA's Hazard Communication Standard, this product is hazardous.
Potential Health Effects:
May cause mild to moderate irritation including stinging and redness.
EYE:
Single, brief exposures may cause mild irritation. Frequent or prolonged contact
SKIN:
may cause more severe irritation, defatting of the skin, and dermatitis.
High vapor concentrations are irritating to the mucous membranes and upper
INHALATION:
respiratory tract and may cause headaches, dizziness, anesthesia, drowsiness,
unconsciousness and other central nervous system effects, including death. May
cause peripheral nervous system disorder and/or damage.
Low order of toxicity by ingestion. May cause irritation of the gastrointestinal lining
INGESTION:
and nausea. Main hazard is aspiration into the lungs during swallowing or
vomiting. Small amounts aspirated into the respiratory system may cause
bronchopneumonia or pulmonary adema, possible progressing to death.
Overexposure to n-hexane may cause progressive and potentially irreversible
CHRONIC EFFECTS:
damage to the peripheral nervous system, particularly in the arms and legs.
Repeated overexposure to aliphatic mineral spirits such as Stoddard solvent can
cause chronic nervous system disease.
central nervous system, peripheral nervous system, respiratory system
TARGET ORGANS:
Medical Conditions Aggravated by Exposure: skin and respiratory conditions
See Section 11 for toxicology and carcinogenicity information on product ingredients.
Page 1 of 6
Product Name: Marine Heavy Duty Corrosion Inhibitor (Aerosol) Product Number (s): 06026
Section 3: Composition/Information on Ingredients
COMPONENT CAS NUMBER % by Wt.
Hexane isomers various 20 - 30
n-Hexane 110-54-3 1.9
Stoddard solvent 8052-41-3 15 - 20
Additive blend proprietary 15 - 20
Dipropylene glycol monomethyl ether 34590-94-8 1-5
Liquefied petroleum gas 68476-86-8 25 - 35
Section 4: First Aid Measures
Immediately flush with plenty of water for 15 minutes. Call a physician if irritation persists.
Eye Contact:
Remove contaminated clothing and wash affected area with soap and water. Call a physician
Skin Contact:
if irritation persists. Wash contaminated clothing prior to re-use.
Remove person to fresh air. Keep person calm. If not breathing, give artificial respiration. If
Inhalation:
breathing is difficult give oxygen. Call a physician.
DO NOT induce vomiting. Contact a physician immediately. If victim is conscious, give 2
Ingestion:
glasses of water.
Treat symptomatically. Gastric lavage using a cuffed endotracheal tube may be performed at
Note to Physicians:
your discretion.
Section 5: Fire-Fighting Measures
Flammable Properties: This product is extremely flammable in accordance with aerosol
flammability definitions (16 CFR 1500.3(c)(6) ).
Flash Point: < 0 F (TCC) Upper Explosive Limit: 9.0
Autoignition Temperature: 489 F Lower Explosive Limit: 1.7
Class B fire extinguishers, dry chemical, foam or CO2
Suitable Extinguishing Media:
fumes, smoke and carbon monoxide
Products of Combustion:
Firefighters should wear self-contained, NIOSH-approved breathing apparatus for
Protection of Fire-Fighters:
protection against suffocation and possible toxic decomposition products. Proper eye
and skin protection should be provided. Use water fog or spray to keep fire-exposed
containers cool and to knock down vapors which may result from product
decomposition. Do not spray water directly on fire; product will float and could be
reignited on surface of water.
Page 2 of 6
Product Name: Marine Heavy Duty Corrosion Inhibitor (Aerosol) Product Number (s): 06026
Section 6: Accidental Release Measures
Use personal protection recommended in Section 8.
Personal Precautions:
Take precautions to prevent contamination of ground and surface waters. Do not flush
Environmental Precautions:
into sewers or storm drains.
Dike area to contain spill. Remove all sources of ignition. Ventilate the area
Methods for Containment & Clean-up:
with fresh air. If in confined space or limited air circulation area, clean-up
workers should wear appropriate respiratory protection. Recover or absorb
spilled material using an absorbent designed for chemical spills. Place used
absorbents into proper waste containers.
Section 7: Handling and Storage
Do not use product near any potential source of ignition. Do not touch container to electrical
Handling Procedures:
sources as container will conduct electricity. Avoid contact with eyes and skin. Avoid
breathing vapors. Wash thoroughly after handling.
Store in a cool dry area out of direct sunlight. Aerosol cans must be maintained below 120 F
Storage Procedures:
to prevent cans from rupturing. Do not store near potential sources of ignition.
III
Aerosol Storage Level:
Section 8: Exposure Controls/Personal Protection
Exposure Guidelines:
OSHA ACGIH OTHER
COMPONENT TWA STEL TWA STEL TWA SOURCE UNIT
Hexane isomers 500(v) 1000(v) 500 1000 NE ppm
n-Hexane 500 NE 50(s) NE NE ppm
Stoddard solvent 500 NE 100 NE NE ppm
Additive blend NE NE NE NE NE
Dipropylene glycol monomethyl ether 100 150 (v) 100 150 NE ppm
Liquefied petroleum gas 1000 NE 1000 NE NE ppm
N.E. ?Not Established (c) ?ceiling (s) ?skin (v) ?vacated
Area should have ventilation to provide fresh air. Use local exhaust to prevent accumulation
Engineering Controls:
of vapors. Use mechanical means if necessary to maintain vapor levels below the exposure
guidelines. If working in a confined space, follow applicable OSHA regulations
None required for normal work where adequate ventilation is provided. Use a NIOSH-
Respiratory Protection:
approved cartridge respirator with an organic vapor cartridge if vapors exceed exposure
limits. Use a self-contained breathing apparatus in confined spaces and for emergencies.
For normal conditions, wear safety glasses. Where there is reasonable probability of liquid
Eye/face Protection:
contact, wear splash-proof goggles.
Use protective gloves such as nitrile, PVC or Viton. Also, use full protective clothing if there
Skin Protection:
Page 3 of 6
Product Name: Marine Heavy Duty Corrosion Inhibitor (Aerosol) Product Number (s): 06026
is prolonged or repeated contact of liquid with skin.
Section 9: Physical and Chemical Properties
liquid
Physical State:
dark amber, viscous
Color:
petroleum
Odor:
Specific Gravity: 0.787
Initial Boiling Point: 140 F
Freezing Point: < -50 F
Vapor Pressure: ND
Vapor Density: > 1 (air = 1)
Evaporation Rate: >1 (Butyl acetate = 1)
negligible in water
Solubility:
NA
pH:
80.0 629.6 5.24
Volatile Organic Compounds: lbs./gal:
wt %: g/L:
Section 10: Stability and Reactivity
Stable
Stability:
sources of ignition, temperature extremes
Conditions to Avoid:
strong oxidizers
Incompatible Materials:
oxides of carbon, aldehydes and other products of incomplete combustion
Hazardous Decomposition Products:
No
Possibility of Hazardous Reactions:
Section 11: Toxicological Information
Long-term toxicological studies have not been conducted for this product. The following information is
available for components of this product.
ACUTE EFFECTS
Component Test Result Route Species
n-hexane LD50 28710 mg/kg Oral Rat
n-hexane LD50 3000 mg/kg Dermal Rabbit
n-hexane LC50 48000 ppm/4H Inhalation Rat
CHRONIC EFFECTS
Carcinogenicity:
Component Result
None listed
OSHA:
None listed
IARC:
None listed
NTP:
No information available
Mutagenicity:
Page 4 of 6
Product Name: Marine Heavy Duty Corrosion Inhibitor (Aerosol) Product Number (s): 06026
Section 12: Ecological Information
Ecological studies have not been conducted for this product. The following information is available for
components of this product.
n-hexane - 48 Hr EC50 water flea: 3.87 mg/L
Ecotoxicity:
96 Hr LC50 Lepomis macrochirus: 4.12 mg/L
No information available
Persistence / Degradability:
No information available
Bioaccumulation / Accumulation:
No information available
Mobility in Environment:
Section 13: Disposal Considerations
The dispensed liquid product is a RCRA hazardous waste for the characteristic of ignitability with a waste
Disposal:
code of D001 (See 40 CFR Part 261.20 ?261.33).
Aerosol containers should be emptied and depressurized before disposal. Empty containers may be
recycled. Any liquid product should be managed as a hazardous waste.
All disposal activities must comply with federal, state and local regulations. Local regulations may be more
stringent than state or national requirements.
Section 14: Transport Information
Proper shipping description:
Consumer Commodity, ORM-D
US DOT (ground):
None
Special Provisions:
Section 15: Regulatory Information
U.S. Federal
Toxic Substances Control Act (TSCA):
All ingredients are either listed on the TSCA inventory or are exempt.
Comprehensive Environmental Response, Compensation and Liability Act (CERCLA):
n-hexane (5000 lbs)
Reportable Quantities (RQ's) exist for the following ingredients:
Spills or releases resulting in the loss of any ingredient at or above its RQ require immediate notification to the
National Response Center (800-424-8802) and to your Local Emergency Planning Committee.
Superfund Amendments Reauthorization Act (SARA) Title III:
None
Section 302 Extremely Hazardous Substances (EHS):
Yes
Section 311/312 Hazard Categories: Fire Hazard
No
Reactive Hazard
Yes
Release of Pressure
Yes
Acute Health Hazard
Yes
Chronic Health Hazard
Page 5 of 6
Product Name: Marine Heavy Duty Corrosion Inhibitor (Aerosol) Product Number (s): 06026
Section 313 Toxic Chemicals: This product contains the following substances subject to the reporting
requirements of Section 313 of Title III of the Superfund Amendments and
Reauthorization Act of 1986 and 40 CFR Part 372:
n-hexane (1.9%)
Clean Air Act:
n-hexane
Section 112 Hazardous Air Pollutants (HAPs):
State Regulations
California Safe Drinking Water and Toxic Enforcement Act (Prop 65):
This product may contain the following chemicals known to the state of
California to cause cancer, birth defects or other reproductive harm: NONE
State Right to Know:
75-83-2, 110-54-3, 79-29-8, 68476-86-8, 8052-42-3, 34590-94-8
New Jersey:
107-83-5, 75-83-2, 110-54-3, 79-29-8, 68476-86-8, 8052-42-3, 34590-94-8
Pennsylvania:
107-83-5, 75-83-2, 110-54-3, 79-29-8, 68476-86-8, 8052-42-3, 34590-94-8
Massachusetts:
110-54-3, 68476-86-8, 8052-42-3, 34590-94-8
Rhode Island :
None
Additional Regulatory Information:
Section 16: Other Information
NFPA: Health: 2 Flammability: 3 Reactivity: 0
HMIS: Health: 2 Flammability: 3 Reactivity: 0 PPE: B
Prepared By: Michelle Rudnick
CRC #: 522E
Revision Date: 11/01/2006
MSDS reformatted in accordance with ANSI Z400.1-2004
Changes since last revision:
The information contained in this document applies to this specific material as supplied. It may not be valid for
this material if it is used in combination with any other materials. This information is accurate to the best of
CRC Industries' knowledge or obtained from sources believed by CRC to be accurate. Before using any
product, read all warnings and directions on the label.
CAS: Chemical Abstract Service NA: Not Applicable
ppm: Parts per Million ND: Not Determined
TCC: Tag Closed Cup NE: Not Established
PMCC: Pensky-Martens Closed Cup g/L: grams per Liter
PPE: Personal Protection Equipment lbs./gal: pounds per gallon
TWA: Time Weighted Average STEL: Short Term Exposure Limit
OSHA: Occupational Safety and Health Administration
ACGIH American Conference of Governmental Industrial Hygienists
NIOSH National Institute of Occupational Safety & Health
Page 6 of 6
|