MATERIAL SAFETY DATA SHEET
SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: HP-146 Gloss Clear Urethane
GENERAL USE: Polymeric resin
PRODUCT DESCRIPTION: Polymeric resin mixture
MANUFACTURER'S NAME DATE PREPARED: November 6, 2006
Page 1 of 4
JFB Hart Coatings, Inc. SUPERSEDES: May 30, 2004
ADDRESS (NUMBER, STREET, P.O. BOX) TELEPHONE NUMBER FOR INFORMATION
10210 Werch Drive, Suite 203 (630) 633-6228
(CITY, STATE AND ZIP CODE) COUNTRY EMERGENCY TELEPHONE NUMBER
Woodridge, IL 60517 USA Infotrac (800) 535-5053 Outside USA (352) 323-3500
DISTRIBUTOR'S NAME
Same
ADDRESS (NUMBER, STREET, P.O. BOX) TELEPHONE NUMBER FOR INFORMATION
(CITY, STATE AND ZIP CODE) COUNTRY EMERGENCY TELEPHONE NUMBER
SECTION 2 - HAZARDOUS INGREDIENTS
OSHA PEL ACGIH TWA
% SARA RQ
HAZARDOUS COMPONENTS CAS # TITLE III LBS
(by weight) PPM MG/M3 PPM MG/M3
Polyurethane resin not specified not specified not established
1-Methyl-2-pyrrolidone (a,b,*) 872-50-4 10 * 100 Yes
Triethylamine (a,c) 121-44-8 <5 25 100 1 Yes 5000
(a,c) See Section 15
(b) California Prop 65, Safe Drinking Water and Toxic Enforcement Act of 1986, chemicals known to the state to cause cancer or reproductive toxicity. A
person in the course of doing business must warn others who may consume, come into contact with, or otherwise be exposed to this chemical.
(*) The ACGIH Time Weighted Average (TWA) has not been established nor has OSHA established the Permissible Exposure Limit (PEL) for this product,
therefore the limits described have been established as guidelines by the manufacturer.
SECTION 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Polymeric reaction product of polyester and isocyanate, clear liquid, contact may cause eye irritation and minor skin irritation. Ingestion may
cause minor gastric distress. Will support combustion if involved in fire. Hazard symbol - none. Risk Phrases - not classified.
POTENTIAL HEALTH EFFECTS
INHALATION: None expected, however, certain individuals may be sensitized and experience minor nausea or headaches. Inhalation of
airborne mist could be damaging to the lungs.
SKIN: Moderately irritating. Prolonged contact may cause irritation.
EYES: This product is a moderate to severe eye irritant. Contact with eyes may cause irritation.
INGESTION: May cause gastric distress, vomiting and diarrhea. Any material aspirated during vomiting may cause lung injury.
CARCINOGENICITY No No No
NTP? IARC MONOGRAPHS? OSHA REGULATED?
1-Methyl-2-pyrrolidone - California Prop 65, Safe Drinking Water and Toxic Enforcement Act of 1986, chemicals known to the state to cause
cancer or reproductive toxicity
MATERIAL SAFETY DATA SHEET
PRODUCT NAME: HP-146 Gloss Clear Urethane
Page 2 of 4
November 6, 2006
SECTION 4 - FIRST AID MEASURES
INHALATION: Remove affected person to fresh air; if symptoms persist seek medical attention.
SKIN: Remove contaminated clothing; wash affected area with soap and water; launder contaminated clothing before reuse; if irritation
persists, seek medical attention.
EYES: Remove contact lenses. Flush eyes with clear running water for 15 minutes while holding eyelids open; if irritation persists, seek
medical attention.
INGESTION: Give two glasses of water for dilution; DO NOT induce vomiting; seek medical attention; never give anything by mouth to an
unconscious person.
SECTION 5 - FIRE FIGHTING MEASURES
FLAMMABLE LIMITS LEL: Not applicable UEL: Not applicable
FLASH POINT (METHOD USED)
AUTOIGNITION TEMPERATURE: Not determined NFPA CLASS:
Non-flammable None
GENERAL HAZARDS: Product may irritating to skin, eyes and respiratory tract. Products of combustion include compounds of carbon,
hydrogen, nitrogen and oxygen, including carbon monoxide.
EXTINGUISHING MEDIA
Carbon dioxide, dry chemical, chemical foam.
FIRE FIGHTING PROCEDURES
Keep containers cool with water spray to prevent container rupture due to steam buildup; contact with material may cause irritation to skin,
eyes and respiratory tract.
UNUSUAL FIRE AND EXPLOSION HAZARDS
None
HAZARDOUS COMBUSTION PRODUCTS
Smoke, fumes, oxides of carbon and nitrogen
SECTION 6 - ENVIRONMENTAL RELEASE MEASURES
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Shut off source of leak if safe to do so. Dike and contain product.
Confine spill, soak up with clay, sand or other approved absorbent, shovel product into approved container for disposal. Wash area with
plenty of water.
SECTION 7 - HANDLING AND STORAGE
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE: Keep container closed when not in use; protect containers from abuse;
protect from extreme temperatures. Keep this and other chemicals out of reach of children.
SECTION 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
ENGINEERING CONTR0LS
The use of local exhaust ventilation is recommended. No other special controls are indicated.
PERSONAL PROTECTION:
RESPIRATORY PROTECTION (SPECIFY TYPE): None required; however, if misting occurs, NIOSH approved respirator capable of
removing particulate from air must be worn. Refer to 29 CFR 1910.134 or European Standard EN 149 for complete regulations.
PROTECTIVE GLOVES: Recommended for general protection
EYE PROTECTION: Safety goggles with side shields
OTHER PROTECTIVE CLOTHING OR EQUIPMENT: Safety eyebath nearby
WORK / HYGIENIC PRACTICES: Practice safe workplace habits. Minimize body contact with this, as well as all chemicals in general.
MATERIAL SAFETY DATA SHEET
PRODUCT NAME: HP-146 Gloss Clear Urethane
Page 3 of 4
November 6, 2006
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
VAPOR PRESSURE (MM Hg) VAPOR DENSITY (AIR = 1)
Not determined >1
SPECIFIC GRAVITY (WATER = 1) EVAPORATION RATE (WATER = 1)
1.1 Not determined
SOLUBILITY IN WATER FREEZING POINT
Negligible Not determined
pH APPEARANCE AND ODOR
Not determined Clear viscous liquid, characteristic odor
BOILING POINT PHYSICAL STATE
Not determined Liquid
VISCOSITY VOLATILE ORGANIC COMPOUNDS (Total VOC's)
Not specified < 1.67 lbs / gallon (< 200 grams / liter)
SECTION 10 - STABILITY AND REACTIVITY
CONDITIONS TO AVOID: Extreme temperatures.
STABILITY UNSTABLE:
STABLE: XXX
INCOMPATIBILITY (MATERIALS TO AVOID): Can react vigorously with strong oxidizers, strong acids, mineral and organic bases, primary and secondary
aliphatic amines.
HAZARDOUS DECOMPOSITION OR BYPRODUCTS: Decomposition will not occur if handled and stored properly. In case of a fire, oxides
of carbon, nitrogen, hydrocarbons, fumes, and smoke may be produced.
CONDITIONS TO AVOID: Hazardous polymerization may occur with excess
HAZARDOUS POLYMERIZATION MAY OCCUR: XXX
of aliphatic amine curing agent
WILL NOT OCCUR:
SECTION 11 - TOXICOLOGICAL INFORMATION
LD50 of Ingredient LC50 of Ingredient
Hazardous Ingredients CAS # EINECS # (Specify Species and Route) (Specify Species)
Not established Not established
Polyurethane resin not specified not specified
4200 mg / kg Not established
1-Methyl-2-pyrrolidone (a,b,*) 872-50-4 212-828-1
Oral - rat
790 mg / kg 6 gms / m3 / 2H
Triethylamine (a,c) 121-44-8 204-469-4
Oral - rat Inhalation - mouse
SECTION 12 - ECOLOGICAL INFORMATION
No data are available on the adverse effects of this material on the environment. Neither COD nor BOD data are available. Based on the
chemical composition of this product it is assumed that the mixture can be treated in an acclimatized biological waste treatment plant system
in limited quantities. However, such treatment should be evaluated and approved for each specific biological system. None of the ingredients
in this mixture are classified as a Marine Pollutant.
SECTION 13 - DISPOSAL CONSIDERATIONS
WASTE DISPOSAL METHOD: Dispose of in accordance with Local, State, and Federal Regulations. Product is classified as non -
hazardous, however, non-hazardous materials may become hazardous waste upon contact with other products. Refer to "40 CFR Protection
of Environment Parts 260 - 299" for complete waste disposal regulations. Consult your local, state, or Federal Environmental Protection
Agency before disposing of any chemicals.
SECTION 14 - TRANSPORT INFORMATION
PROPER SHIPPING NAME: Not Regulated
DOT HAZARD CLASS / Pack Group: None / None IATA HAZARD CLASS / Pack Group: None
REFERENCE: Not Applicable IMDG HAZARD CLASS: None
UN / NA IDENTIFICATION NUMBER: None RID/ADR Dangerous Goods Code: None
LABEL: None Required UN TDG Class / Pack Group: None
HAZARD SYMBOLS: None Hazard Identification Number (HIN): None
Note: Transportation information provided is for reference only. Client is urged to consult CFR 49 parts 100 - 177, IMDG, IATA, EC,
Canadian TDG, and United Nations TDG information manuals for detailed regulations and exceptions covering specific container sizes,
packaging materials and methods of shipping.
MATERIAL SAFETY DATA SHEET
PRODUCT NAME: HP-146 Gloss Clear Urethane
Page 4 of 4
November 6, 2006
SECTION 15 - REGULATORY INFORMATION
TSCA (Toxic Substance Control Act)
All components of this product are listed on the U.S. Toxic Substances Control Act Chemical Inventory (TSCA Inventory) or are exempted
from listing because a Low Volume Exemption has been granted in accordance with 40 CFR 723.50.
SARA TITLE III (Superfund Amendments and Reauthorization Act)
311/312 Hazard Categories
Immediate health
313 Reportable Ingredients:
(a) A "Yes" in the SARA TITLE III column in Section 2 indicates a toxic chemical subject to annual reporting requirements of Section 313 of
the Emergency Planning and Community Right-To-Know Act of 1986 and of 40 CFR 372.
CERCLA (Comprehensive Response Compensation and Liability Act)
(c) The Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) has notification requirements for releases or
spills to the environment of the Reportable Quantity (RQ for this mixture > 24,000 lbs) or greater amounts, according to 40 CFR 302.
California Prop 65, Safe Drinking Water and Toxic Enforcement Act of 1986
There is a chemical present (1-Methyl-2-pyrrolidone) known to the state of California to cause cancer or reproductive toxicity.
CPR (Canadian Controlled Products Regulations)
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the MSDS contains all
the information required by the Controlled Products Regulations. WHMIS Classification: D2B
IDL (Canadian Ingredient Disclosure List)
Components of this product identified by CAS number and listed on the Canadian Ingredient Disclosure List are shown in Section 2.
DSL / NDSL (Canadian Domestic Substances List / Non-Domestic Substances List)
Components of this product identified by CAS number are listed on the DSL or NDSL, or are otherwise in compliance with the New
Substances Notification (NSN) regulations. Only ingredients classified as "hazardous" are listed in Section 2 unless otherwise indicated.
EINECS (European Inventory of Existing Commercial Chemical Substances)
Components of this product identified by CAS numbers are on the European Inventory of Existing Commercial Chemical Substances.
EC Risk Phrases SYMBOL(S) REQUIRED EC Safety Phrases
FOR LABEL
Not classified S24/25 Avoid contact with skin and eyes
None
SECTION 16 - OTHER INFORMATION
No specific notes.
HMIS HAZARD RATINGS HEALTH 2 * = Chronic Health Hazard 2 = MODERATE
FLAMMABILITY 0 0 = INSIGNIFICANT 3 = HIGH
PHYSICAL HAZARD 0 1 = SLIGHT 4 = EXTREME
PERSONAL PROTECTIVE EQUIPMENT Safety Glasses, Gloves
B
REVISION SUMMARY:
This MSDS has been revised in the following Foremat revision
sections:
MSDS Prepared by: Comprehensive Data Base, Inc.
P.O. Box 5604
Lakeland, FL 33807 USA
(863) 644 - 3298 www.compdatabase.com
The information contained herein is believed to be accurate but is not warranted to be so. Data and calculations are based on information furnished by
the manufacturer of the product and manufacturers of the components of the product. Users are advised to confirm in advance of need that
information is current, applicable and suited to the circumstances of use. Vendor assumes no responsibility for injury to vendee or third persons
proximately caused by the material if reasonable safety procedures are not adhered to as stipulated in the data sheet. Furthermore, vendor assumes
no responsibility for injury caused by abnormal use of this material even if reasonable safety procedures are followed. Any questions regarding this
product should be directed to the manufacturer of the product as described in Section 1.
|