Elite Z Mechanical Pump Fluid
( Cambridge Mill Products, Inc. CMP Elite Z Mechanical Pump Fluid )
MATERIAL SAFETY DATA SHEET
VARIAN Part Numbers 695409005 and 695409010
DISTRIBUTED BY:
VARIAN VACUUM TECHNOLOGIES
121 HARTWELL AVENUE
LEXINGTON, MA 02421-3133
www.varianinc.com/vacuum
TO ORDER CALL: 1-800-8 VARIAN (1-800-882-7426)
or
ORDER ONLINE AT: http://www.varianinc.com/vacuum
MATERIAL SAFETY DATA SHEET
CMP ELITE Z Mechanical Pump Fluid
HMIS RATING
Health: 1 Flammability: 1 Reactivity: 0 Special: X
SECTION 1 -- LOCATION
Location: 3049 Alliance Road N.W.
Malvern, Ohio 44644
Telephone: 330-863-1121
Date Prepared: January 1, 2007
SECTION II -- HAZARDOUS INGREDIENTS/IDENTITY
Hazardous Component(s) Chemical and Common Name(s)..Synthetic Hydrocarbon Fluid
Exposure Limit
CAS No. 68037-01-4 100% 5mg/m3 Oil Mist
To the best of our knowledge, the above listed component(s) is not hazardous according to OSHA
(1910.1200) or one or more State Right-to-Know lists.
SECTION III -- PHYSICAL & CHEMICAL CHARACTERISTICS
Appearance and Odor: Colorless to light straw; mild odor
Specific Gravity @ 22 (C): .84
Vapor Pressure @ 25 (C): 1 x 10-7 Torr
Vapor Density (Air=1): Not Applicable
Solubility in Water: Insoluble
Reactivity in Water: Not Applicable
Melting Point: Not Applicable
SECTION IV -- FIRE & EXPLOSION DATA
Flash Point: 515藲 (F) 268藲(C) Method
Used: C.O.C.
Flammable Limits (%): No Data Available
Extinguishing Media: Dry Chemical, Water Spray (Fog), Foam or Carbon Dioxide
Special Fire Fighting Procedures: For fires involving this material, do not enter any enclosed or
confined fire space without proper protective equipment, including self-contained breathing apparatus.
Unusual Fire and Explosion Hazards: Do not weld, heat or drill container. Residue may ignite with
explosive violence if heated sufficiently.
CAUTION: DO NOT USE PRESSURE TO EMPTY DRUM OR EXPLOSION MAY RESULT.
SECTION V -- PHYSICAL HAZARDS (REACTIVITY DATA)
Stability: Product is stable under normal conditions.
Conditions to Avoid: Excessive heat.
Hazardous Polymerization: Will not occur.
Incompatibility (Materials to Avoid): May react with strong oxidizing agents such as Chlorates,
Nitrates, Peroxides, etc.
Hazardous Decomposition Products: Excessive heat may produce Carbon Monoxide, Carbon
Dioxide, Aldehydes and Ketones, combustion products of
Nitrogen and Sulfur.
SECTION VI -- HEALTH HAZARDS
Eyes: This substance is not expected to cause prolonged or significant eye irritation. This hazard
evaluation is based on data from similar materials.
Skin: This substance is not expected to cause prolonged or significant skin irritation. This hazard
evaluation is based on data from similar materials.
Inhalation: If inhaled, this substance is considered practically non-toxic to internal organs. This hazard
evaluation is based on data from similar materials.
Ingestion: If swallowed, this substance is considered practically non-toxic to internal organs. This
hazard evaluation is based on data from similar materials.
Chemical Listed as Carcinogen or Potential Carcinogen:
IARC Monographs: No OSHA: No. National Toxicology
Program: No
Routes of Entry
Inhalation: This material is not expected to be an immediate inhalation problem. Remove to fresh air.
Obtain medical assistance if difficult breathing.
Eyes: Flush eyes with fresh water for 15 minutes. Remove contact lenses if worn. No first aid
procedures are required.
Skin: No first aid procedures are required. As a precaution, wash skin thoroughly with soap and
water. Remove and wash contaminated clothing.
Ingestion: No adverse effects are expected. If more than several mouthfuls are swallowed, abdominal
discomfort, nausea, and diarrhea may occur. Consult Medical Personnel before inducing
vomiting. .
SECTION VII -- SPECIAL PRECAUTIONS AND SPILL/LEAK PROCEDURES
Precautions to be taken in Handling and Storage: Minimum feasible handling temperatures should be
maintained. Periods of exposure to high temperature should be minimized. Water contamination
should be avoided.
Steps to be taken in Case of Release or Spill: Ventilate area, Avoid breathing vapor. Use self-contained
breathing apparatus or supplied air for large spills or confined areas. Contain spill if possible. Wipe up
or absorb on suitable material and shovel up. Prevent entry into sewers and waterways.
SECTION VII -- SPECIAL PRECAUTIONS AND SPILL/LEAK PROCEDURES (CONTD.)
Waste Disposal Methods (Consult Federal, State, Local Regulations): Under RCRA, it is the
responsibility of the user of products to determine at the time of disposal whether product meets RCRA
criteria for hazardous waste. This is because uses, transformations, mixture, processes, etc., may
render the resulting material hazardous.
SECTION VIII -- SPECIAL PROTECTION INFORMATION/CONTROL MEASURES
Respiratory Protection: None required if exposures are within permissible concentrations of
5.0mg/m3 of air for mineral oil mist averaged over an eight-hour daily
exposure (ACGIH 1984-85).
Ventilation: Normal.
Protective Gloves: Impervious gloves when prolonged contact cannot be avoided.
Eye Protection: Chemical type goggles/face shield.
Other Protective Equipment: None considered necessary at this time.
Work/Hygienic Practices: Employees should exercise reasonable personal cleanliness.
Information given herein is offered in good faith as accurate, but without guarantee. Conditions of use
and suitability of the product for particular uses are beyond our control; all risks of use of the product
are therefore assumed by the user and we expressly disclaim all warranties of every kind and
nature, including warranties of merchantability and fitness for a particular purpose in respect to
the use or suitability of the product. Nothing is intended as a recommendation for uses which
infringe valid patents or as extending license under valid patents. Appropriate warnings and safe
handling procedures should be provided to handlers and users.
ATTENTION: Misuse of empty containers can be hazardous. Empty containers can be hazardous if
used to store toxic, flammable, or reactive materials. Cutting or welding of empty
containers might cause fire, explosion or toxic fumes from residues. Do not
pressurize or expose to open flame or heat. Keep container closed and drum bungs in
place.
REGULATORY INFORMATION:
D.O.T. SHIPPING NAME: NOT APPLICABLE
D.O.T. HAZARD CLASS: NOT APPLICABLE
D.O.T. IDENTIFICATION NUMBER: NOT APPLICABLE
|