1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Manufacturer................... Preparation Date: 10/8/2001
AccuStandard, Inc. Date MSDS Printed: Sep 25, 2002
125 Market Street Information Phone Number: 203-786-5290
New Haven, CT 06513
Hours: Mon. to Fri. 8-5
Emergency Phone Number: 203-786-5290
MSDS Number : M-001P
Product Name.............
Phenols Mix
Synonyms.................
None
Chemical Family: Standard Solution Formula...................
Formula
Solution
Molecular Weight: N/A
2. COMPOSITION / INFORMATION ON INGREDIENTS
Component CAS # Appr.
4-Chloro-3-methylphenol 59-50-7 0.25%
2-Chlorophenol 95-57-8 0.05%
2,4-Dichlorophenol 120-83-2 0.05%
2,4-Dimethylphenol 105-67-9 0.05%
2,4-Dinitrophenol 51-28-5 0.15%
2-Methyl-4,6-dinitrophenol 534-52-1 0.25%
2-Nitrophenol 88-75-5 0.05%
4-Nitrophenol 100-02-7 0.25%
Pentachlorophenol 87-86-5 0.25%
Phenol 108-95-2 0.05%
2,4,6-Trichlorophenol 88-06-2 0.15%
Methanol 67-56-1 98.45%
3. HAZARDS IDENTIFICATION
POTENTIAL HEALTH EFFECTS (ACUTE AND CHRONIC)
Symptoms of Exposure:
MSDS # M-001P
Toxic by ingestion, inhalation and skin absorption.
After ingestion or inhalation, initial symptoms may be only that of mild
intoxication, but may become severe after 12 or 18 hours.
May Cause Damage To Liver, Kidneys, and Central Nervous System.
Symptoms of over-exposure include dizziness, nausea, muscle weakness,
narcosis and respiratory failure.
May irritate skin on prolonged contact.
Ingestion can produce blindness (as little as 30 ml) or death (as little
as 100 ml).
Fetal development abnormalities and effects on embryo or fetus have been
reported from prolonged exposure to methanol in laboratory tests
involving pregnant rats.
Medical Cond. Aggravated by Exposure:
Skin conditions, eye problems, impaired liver or kidney function
Routes of Entry............
Inhalation, ingestion or skin contact.
Carcinogenicity........ .
Contains component (s) which are possible cancer hazard(s).
WARNING: This product contains a chemical(s) known to the state of
California to cause cancer.
4. FIRST AID MEASURES
Emergency First Aid:
GET MEDICAL ASSISTANCE FOR ALL CASES OF OVEREXPOSURE.
Skin: Immediately flush thoroughly with large amounts of water.
MSDS # M-001P
Eyes: Immediately flush thoroughly with water for at least 15 minutes.
Assure adequate flushing by separating the eyelids with fingers.
Inhalation: Remove to fresh air; give artificial respiration if
breathing has stopped.
Ingestion: If conscious, drink water and induce vomiting immediately as
directed by medical personnel. Never give anything by mouth to an
unconscious person.
Remove contaminated clothing and wash before reuse.
5. FIRE FIGHTING MEASURES
Flash Point (F)..........: 52F (tcc)
Flammable Limits LEL (%).: 6.7
Flammable Limits UEL (%).: 36.5
Extinguishing Media..........
Use water spray, dry chemical, C02, or "alcohol" foam.
Fire Fighting Procedures....:
Wear self-contained breathing apparatus and protective clothing.
Fire & Explosion Hazards..:
Dangerous fire and explosive hazard.
Closed containers may explode upon heating.
Vapor can travel distances to ignition source and flash back.
6. ACCIDENTAL RELEASE MEASURES
Spill Response:
Wear suitable protective equipment listed under Expose /Personal
Protection. Eliminate any ignition sources until the area is determined to
be free from explosion or fire hazards. Contain the release and eliminate
its source, if this can be done without risk. Dispose as hazardous waste.
Comply with Federal, State and local regulations.
7. HANDLING AND STORAGE
MSDS # M-001P
Handling & Storage:
Keep container closed.
Store in a cool area away from ignition sources and oxidizers.
Do not breath vapor or mist.
Do not get in eyes, on skin, or on clothing.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
ENGINEERING CONTROLS AND PERSONAL PROTECTIVE EQUIPMENT:
Ventilation, Respiratory Protection, Protective Clothing, Eye Protection
Respiratory Protection: If workplace exposure limit(s) of product or any component is
exceeded (see TLV/PEL), a NIOSH/MSHA approved air supplied respirator is advised in
absence of proper environmental control. OSHA regulations also permit other NIOSH/MSHA
respirators (negative pressure type) under specified conditions(see your safety equipment supplier).
Engineering and/or administrative controls should be implemented to reduce exposure.
Material should be handled or transferred in an approved fume hood or with adequate ventilation.
Protective gloves must be worn to prevent skin contact.
(Butyl Rubber, Viton or equivalent)
Safety glasses with side shields must be worn at all times.
Work / Hygenic Practices:
Wash thoroughly after handling. Do not take internally. equipment should be readily available.
Eye wash and safety
鈥︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹??..
MSDS # M-001P
EXPOSURE GUIDELINES
OSHA - PEL:
TWA STEL CL
PPM MG/M3 PPM MG/M3 PPM MG/M3
Component SKIN
鈥︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹??
4-Chloro-3-methylphenol
2-Chlorophenol
2,4-Dichlorophenol
2,4-Dimethylphenol
2,4-Dinitrophenol
2-Methyl-4,6-dinitrophenol 0.2 X
2-Nitrophenol
4-Nitrophenol
Pentachlorophenol 0.5 X
Phenol 5 19 X
2,4,6-Trichlorophenol
Methanol 200 262 250 328 X
鈥︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹??
ACGIH - TLV:
TWA STEL CL
3 3
PPM MG/M3
Component PPM MG/M PPM MG/M SKIN
鈥︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹?︹??
4-Chloro-3-methylphenol
2-Chlorophenol
2,4-Dichlorophenol
2,4-Dimethylphenol
2,4-Dinitrophenol
2-Methyl-4,6-dinitrophenol 0.2 X
2-Nitrophenol
4-Nitrophenol
Pentachlorophenol 0.5 X
Phenol 5 19 X
2,4,6-Trichlorophenol
Methanol 200 260 250 325 X
MSDS # M-001P
9. PHYSICAL AND CHEMICAL PROPERTIES
Boiling Point (C 760 mmHg)... : 65
Melting Point (C)....鈥︹?︹?︹?︹?︹??: -98
Specific Gravity (H20 = 1)鈥︹??.. : 0.791
Vapor Pressure (mm Hg).鈥︹?︹??..: 7 20C
Percent Volatile by Vol(%)鈥︹?︹??.: 99. 9+
Vapor Density (Air = 1)鈥︹?︹?︹?︹??: 1.1
Evaporation Rate (BuAc = 1)鈥︹??.: 5.9
Solubility in Water (%)....鈥︹?︹?︹??: Soluble
Appearance.............:
Clear liquid
10. STABILITY AND REACTIVITY
Stability...................鈥︹?︹?︹?︹?︹?︹??:Yes
Hazardous Polymerization....:
Does not occur
Hazardous Decomposition....:
CO禄x芦, Formaldehyde
Conditions To Avoid...........
Heat; contact with ignition sources
Materials To Avoid...........
Acids
Oxidizers
Other
Reactive metals
11. OTHER INFORMATION
Comments:
None.
I= Revised Section
N/A = Not Available
N/E = None Established
The statements contained herein are offered for informational purposes only and are
based upon technical data that we believe to be accurate. It is intended for use only by persons having
the necessary technical skill and at their own discretion and risk. Since conditions and manner of use are
outside our control, we make NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY,
FITNESS OR OTHERWISE.
MSDS # M-001P
|