MSDS of FIBER
MATERIAL SAFETY DATA SHEET : FIBER (HWc)
SECTION 1 Chemical product and Company Identification
Product Name : TAIRILIN DTY
Trade Name : TAIRILIN DTY
Chemical Name : POLYETHYLENE TEREPHTHALATE
Cas No : 25038-59-9(PET)
Chemical Formula : HO(CH2) 2O[OC- COO(CH2) 2] nOH
Molar Mass : 192
Chemical Family : POLYESTER CHIP, POLYESTER STAPLE, POLYESTER POY
END Uses : Knitting, Weaving, Jacket, Sport wear etc.
Company Identingation
Name of Manufacturer : NAN YA PLASTICS CORP.
Address : No:201, TUNG HWA NORTH ROAD, TAIPE, TAIWAN, REP.OF CHINA
Telephone Number : (+866)2-27178524
Contact Poing
Designation:P.H. Tsai TEL: (+886)2-27178332
NOTE: The contact point given should direct a caller to someone who can clarify information or provide further
information and /or a bibliography of the product. The titles of a position or section should be inserted.
SECTION 2 Composition/Information on Ingredient
Main ingredients : Polyethylene terephthalate > 98Wt%
Fillers : TiO2 < 0.5Wt%
Catalyst : Antimony compounds < 0.2Wt%
Finisf oil : < 1 Wt%
SECTION 3 Hazardous Identification
Except for minor irritation of the skin and eyes, noadverse health effects are known. This material or any of its
components does not have concentrations equal than 0.1% of those listed by IARC, NTP, OSHA or ACGIH as a
carcinogen.
HMIS Hazard Ratings: Health 鈥? 1, Flammability-1, Chemicas1 Reactivity-1
NFPA Hazard Ratings: Health 鈥? 1, Flammability-1, Chemicas1 Reactivity-1
NOTE: HMIS and NFPA ratings involve data and interpretations that may from company to hazard. To deal with
the safe handling of this material. All the information contained in this MSDS must be condidered.
SECTION 4 First Aid Measures
Ingestion : Unlikely to be required but, if necessary, treat symptomatically.
Eye contact : Irrigate with eyewash solution or clean water, if easy to do, remove contact lenses.
Skin contact : If irritation wash off with water.
Inhalation : If symptomatic, move to fresh air, get medical attention if symptoms persist.
Page : 1 of 3
MSDS of FIBER
SECTION 5 Fire Fighting Measures
Extinguishing media : Water spray, dry chemical.
Special Fire fighting instruction : Wear self-contained breathing appearatus and protective clothing.
Hazardous Combustion Products : Carbon dioxide, carbon monoxide, formaldehyde, ethanol, methanol,
acetic acid and acetone.
Unusual fire and explosion hazards : Powdered material may from explosive dust-air mixtures.
SECTION 6 Accidental, Release Measures
Sweep up and place in a container, drums or plastic bags. For waste.
Disposal : Dispose of in accordance with local regulations.
SECTION 7 Handling and Storage
Personal precautionary measures : It is a good industrial hygiene practice to wear eye protection to prevent any eye
contact. It is a good industrial hygiene practice to prevent prolonged or repeated skin content.
Prevention of fire and Explosion : Keep from contact with oxidizing materials. Minimize dust Generation and
accumulation. Refer to NFPA Pamphlet No. 654
Prevention of fire and Dust Explosions : In the Chemical, Dye, Phamaceutical and Plastics industrial.
Storage : Keep container, drums or plastic bags closed.
Keep away from heat and sources of ignition.
SECTION 8 Exposure control and Personal protection
Unlikely to cause harmful effects under normal conditions of handling and use.
The following values apply to nuisance dust which may be formed during cold processing(eg, cutting, grinding,
stamping).
Exposure Limit :
ACGIH Threshold Limit Value (TL V) : None Established.
OSHA Permissible Exposure Limit(PEL) : None Established.
Ventilation : Good general ventilation should be used.
Eye Protection : It is a good industrial hygiene practice to wear eye protection to prevent any eye contact.
Skin Protection : It is a god industrial hygiene practice to prevent prolonged or repeated skin content.
Recommended Decontamination Facilities : Eyewash, shower and standard washing facilities.
SECTION 9 Physical and Chemical Properties
Physical Form : Solid
Colour : Clear
Odour : Odourless
Solubility (in water; Ambiet Temperature) : Insoluble
Boiling Point : Not applicable
Melting Point(! ) : 235~260!
Vapour Pressure(mm of Hg at 25! )
Percentage Volatiles : Not applicable
Evaporation Rate : Not applicable
Vapour Density : Not applicable
Specific Gravity : 1.375~1.410
Flash Point(! ) : 440
Autoignition temperature : None
Flammable limit(%) and other properties if applicable : Not applicable
Page : 2 of 3
MSDS of FIBER
SECTION 10 Stability and Reactivity
Stability : Stable under normal conditions
Incompatibility(Materials to avoid) : Strong oxidizing agent
Combustion products : Carbon dioxide, Carbon monoxide
Thermal decomposition : Acetaldehyde, Ethylene
Hazardous polymerization : Will not occur
SECTION 11 Toxicological Information
Toxicity Data : None
Carcinogenicity : None
Reproductive Effect : None
Effects of overexposure : None
Chronic effects : None
Target organs : None
Medical Conditions Generally Aggravated by exposure : None
SECTION 12 Ecological Information
Mobility : Will slowly degrade with exposure to UV light.
Bioaccumulation : No data available
Biodcgradability : No data available
Aquatic toxicity : No data available
SECTION 13 Transport Information
Any international and national regulatory requirements : None
Packaging information : Using the cartons/ pallet and paper core
Any other special requirement : None
Transportation : By land transport and sea transport
SECTION 14 Regulatory Information
User : Not classified as hazardous to users
Transport : Not classified as hazardous for transport
SECTION 15 Other Information
For other technical information contact the address in
A. NAN YA PLASTICS CORP.
No.201, TUNN HWA NORTH ROAD,
TAIPE, TAIWAN, REP. OF CHINA
TEL : 886-2-27178524 FAX : 886-2-27186311
B. SPINNING&TETURING PLANT 2
No.102 NAN LIN Rd. DAH-KO CHUN TAISAN HSIANG,
TAIPE HSIEN, TAIWAN, REP. OF CHINA
TEL : 886-2-29018241 FAX : 886-2-29080795
2-3-28 Wakamatsucho-higashi,
Tondabayashi, Osaka, 584-0023, JAPAN
TEL: (+81)721-20-0120 FAX: (+81)721-20-0278
E-mail: info@cleancross.net
Page : 3 of 3
|