MSDS-TCRPE
Rev 1-0307
MATERIAL SAFETY DATA SHEET - TCRPE
Section 1 Company and Product Identification
TM
STAR Multimer Reagents
TCR p53-264-PE TCR gp100-PE
Product Name
TCR p53-149-PE TCR MART-1-PE
TCR CMV-pp65-PE
TCR-AR1-0020 TCR-BR1-0020 TCR-CR1-0020 TCR-DR1-0020 TCR-ER1-0020
TCR-AR1-0050 TCR-BR1-0050 TCR-CR1-0050 TCR-DR1-0050 TCR-ER1-0050
Catalogue Number
TCR-AR1-0150 TCR-BR1-0150 TCR-CR1-0150 TCR-DR1-0150 TCR-ER1-0150
TCR-AR1-0500 TCR-BR1-0500 TCR-CR1-0500 TCR-DR1-0500 TCR-ER1-0500
Altor Bioscience Corporation
Manufacturer 2810 North Commerce Parkway
Miramar, FL 33025
Altor Bioscience Corporation
Distributor and Emergency 2810 North Commerce Parkway
Phone No. Miramar, Florida 33025
Tel. (954) 443-8600 Fax: (954) 443-8600
Section 2 Composition and Information on Ingredients
Hazardous ingredients:
Substance Name: T-cell Receptor with less than 0.1% Sodium Azide; CAS # none
The hazards identified with this product are those associated with the following component:
Ingredient Name:
Sodium Azide; CAS # 26628-22-8; Percent < 0.1%
Section 3 Hazards Identification
Light pink; Clear; Liquid, Odorless
Nonflammable aqueous solution.
Emergency Overview
Does not meet OSHA criteria for hazardous materials.
Contain materials of animal origin.
Sodium azide forms explosive compounds with heavy metals. This product contains
Physical Hazards concentration of azide <0.1% (w/w) which with repeated contact with lead and copper commonly
found in plumbing drains may result in the build up of shock sensitive compounds.
Potential Health Effects This product does not meet OSHA criteria for hazardous materials. However, it does contain
Summary material of animal origin and should be considered potentially infectious.
Product Hazard Classification US OSHA: not applicable
Section 4 First Aid Measures
If product is inhaled, move exposed individual to fresh air. If individual is not breathing, begin
Inhalation
artificial respiration immediately and obtain medical attention.
If product is splashed in eyes, wash eyes under gently running water for several minutes,
Eye Contact making sure that the eyelids are held open. If irritation or redness develops, obtain medical
attention.
Remove any contamination clothing. Wash affected area with plenty of soap and water. Use
Skin Contact
disinfectant if possible.
If ingested, wash mouth out with water provided the person is conscious. If irritation or
Ingestion
discomfort occurs, seek medical attention.
Section 5 Fire Fighting Measures
Flash point Not applicable
Flammable Limits Not applicable
Auto ignition temp. Not applicable
Extinguishing Media Use extinguishing media suitable for surrounding fire.
Special Fire and Explosion No special hazards determined
Hazards
Hazardous Combustion Due to the nature and volume of this product, the type and amount of combustion products are
Products negligible.
Protective Equipment for Self-contained breathing apparatus is recommended for firefighters.
Firefighters
Section 6 Accidental Release Measures
This product contains a material of biological origin. Use universal precaution during clean up
Personal Precautions
procedures.
As a precautionary measure, treat spilled material with a 1:10 bleach/water solution. Absorb
Spill and Leak Procedures liquid and place in container suitable for disposal. Avoid generation of aerosols during clean up.
Comply with applicable waste disposal regulations.
Environmental Precautions Contain spill to prevent migration or evaporation.
Page 1 of 2
2810 N. Commerce Parkway, Miramar, Florida 33025
MSDS-TCRPE
Rev 1-0307
Section 7 Handling and Storage
This product should be handled as though capable of transmitting infectious diseases. Universal
Handling Precautions
precautions should be followed when using this product.
Recommended Storage Keep away from incompatible material.
Conditions To maintain efficacy, store according to instruction in the product labeling.
Section 8 Exposure Controls and Personal Protection
Exposure Limits
US OSHA: None established
Engineering Controls Use in well ventilated area.
Under normal conditions, the use of this product should not require respiratory protection. If
overexposure should occur and ventilation is not adequate to maintain airborne concentrations
Respiratory Protection
at acceptable levels, the use of respiratory protection should be evaluated by a qualified
professional.
Eye Protection Safety glasses or chemical goggles should be worn to prevent eye contact
Skin Protection Impervious gloves, such as latex or equivalent, should be worn to prevent skin contact.
Section 9 Physical and Chemical Properties
Physical State Liquid
Color Light pink
Transparency Clear
Odor Odorless
pH Neutral pH
Solubility
Water Miscible
Organic Not available
Section 10 Stability and Reactivity
Stability Stable under normal temperatures and pressures.
Strong acids
Strong bases
Hazardous Incompatibilities
Strong oxidizers
Metal and metallic compounds
Hazardous Decomposition When stored as labeled, no known hazardous decomposition products are formed during the
Products shelf-life of this product.
Condition to Avoid Keep away from incompatible material.
Section 11 Toxicological Information
Toxicity Data for Hazardous Not applicable
Ingredients
Primary Route of Exposure Common routes of entry include inhalation, ingestion and eye/skin contact. Specific paths of
Potential Effects of Acute This product contains materials of animal origin and should be considered potentially infectious.
Exposure No other health hazards were identified from a review of available literature.
Potential Effect of Chronic Effects are similar to those for acute exposure
Exposure
Symptoms of overexposure No specific symptoms identified.
Carcinogenicity No ingredient in this product is listed as carcinogenic by OSHA.
Other Effects None identified
Condition of Aggravated by None identified
Section 12 Ecological Information
Ecotoxicity No information available
Biodegradability No information available
Mobility No information available
Section 13 Disposal Consideration
Waste Disposal Dispose of waste product, unused product and contaminated packaging in compliance with
federal, state and local regulations. If unsure of the applicable requirements, contact the
authorities for information.
Sodium azide preservative may form explosive compounds in metal drain lines.
Section 14 Transport Information
Transportation of this product is
not regulated under US DOT.
Section 15 Regulatory Information
US Federal and State Regulation Sodium azide is subject to reporting requirements of section 313, Title II of SARA
Page 2 of 2
2810 N. Commerce Parkway, Miramar, Florida 33025
|