Material Safety Data Sheet according 91/155/EEC
Product Name: B712 CHROME FX BASECOAT
Date: 09.26.05 Revision date: 09.26.05 page: 1/5
1. IDENTIFICATION OF THE PREPARATION AND COMPANY.
Product Name and Code : CHROME FX BASECOAT
colorless
B712
Use of the substance/preparation:
producer / supplier:
Alsa Corporation
2640 East 37th Street
Vernon, CA 90058
phone: 1-323-581-5200 fax: 1-323-589-4400
Infotrac Chemical Emergency Response 鈥? 800-535-5053 / 352-323-3500
2. COMPOSITION/INFORMATION ON INGREDIENTS.
Substances presenting a health hazard within the meaning of the Dangerous
Substances Directive 67/548/EEC.
EINECS-No. Names
R-phrases Symb. Conc.
204-658-1 n-butyl acetate
10-66-67 25 - 50
265-199-0 Solvent naphtha (petroleum), light arom.; Low boiling point
naphtha - unspecified
10-37-51/53-65-66-67 Xn,N 2.5 - 10
265-198-5 Solvent naphtha (petroleum), heavy arom.; Kerosine -
unspecified
51/53-65-66-67 Xn,N 2.5 - 10
See full text of R-phrases under chapter 16
3. HAZARDS IDENTIFICATION OF THE PREPARATION.
Danger classification : n.a.
10 Flammable.
52/53 Harmful to aquatic organisms may cause long-term adverse effects
in the aquatic environment.
66 Repeated exposure may cause skin dryness or cracking.
67 Vapors may cause drowsiness and dizziness.
4. FIRST AID MEASURES.
General:
In all cases of doubt, or when symptoms persist, seek medical attention.
Never give anything by mouth to an unconscious person.
Inhalation:
Remove to fresh air, keep patient warm and at rest, if breathing is
irregular or stopped, administer artificial respiration. Give nothing by
mouth. If unconscious place in recovery position and seek medical advice.
Eye contact:
Remove contact lenses, irrigate copiously with clean, fresh water for at
least 10 minutes, holding the eyelids apart and seek medical advice.
Skin contact:
Remove contaminated clothing. Wash skin thoroughly with soap and water or
use recognized skin cleanser. Do NOT use solvents or thinners.
Material Safety Data Sheet according 91/155/EEC
Product Name: B712 CHROME FX BASECOAT
Date: 09.26.05 Revision date: 09.26.05 page: 2/5
Ingestion:
If accidentally swallowed obtain immediate medical attention. Keep at rest. Do
NOT induce vomiting.
5. FIRE-FIGHTING MEASURES.
Extinguishing media: recommended: alcohol resistant foam, CO2, powders,
waterspray
not to be used : waterjet.
Recommendations: Fire will produce dense black smoke. Exposure to
decomposition products may cause a health hazard. Appropriate breathing
apparatus may be required. Cool closed containers exposed to fire with water.
Do not allow run-off from fire fighting to enter drains or water courses.
6. ACCIDENTAL RELEASE MEASURES.
Exclude sources of ignition and ventilate the area. Avoid breathing vapors.
Refer to protective measures listed in sections 7 and 8. Contain and collect
spillage with non-combustible absorbent materials, e.g. sand, earth,
vermiculite, diatomaceous earth and place in container for disposal
according to local regulations (see section 13). Do not allow to enter
drains or watercourses.
Clean preferably with a detergent; avoid use of solvents.
If the product contaminates lakes, rivers or sewages, inform appropriate
authorities in accordance with local regulations.
7. HANDLING AND STORAGE.
Handling.
Vapors are heavier than air and may spread along floors. Vapors may form explosive
mixtures with air. Prevent the creation of flammable or explosive concentrations
of vapor in air and avoid vapor concentration higher than the occupational
exposure limits.
In addition, the product should only be used in areas from which all naked lights
and other sources of ignition have been excluded. Electrical equipment should
be protected to the appropriate standard. Preparation may charge
electrostatically: always use earthing leads when transferring from one
container to another. Operators should wear antistatic footwear and clothing and
floors should be of the conducting type. Keep container tightly closed. Isolate
from sources of heat, sparks and open flame. No sparking tools should be used.
Avoid skin and eye contact. Avoid inhalation of dust, particulates and spray mist
arising from the application of this preparation. Avoid inhalation of dust from
sanding.
Smoking, eating and drinking should be prohibited in application area. For
personal protection see Section 8.
Never use pressure to empty: container is not a pressure vessel. Always
keep in containers of same material as the original one. Comply with
the health and safety at work laws. Storage.
Although the storage and use of this product is not subject to specific statutory
requirements, observation of the principles of the Highly Flammable Liquids and
Liquefied Petroleum Gases Regulations as appropriate will be seen as good
industrial practice in meeting the general duties of the Health and Safety at
Work Act.
Observe label precautions. Store between 10 and 25 掳C in a dry, well ventilated
place away from sources of heat and direct sunlight. Keep away from sources of
ignition. Keep away from oxidizing agents, from strongly alkaline and strongly
acid materials.
No smoking. Prevent unauthorized access. Containers which are opened must be
carefully resealed and kept upright to prevent leakage.
Material Safety Data Sheet according 91/155/EEC
Product Name: B712 CHROME FX BASECOAT
Date: 09.26.05 Revision date: 09.26.05 page: 3/5
8. EXPOSURE CONTROLS/PERSONAL PROTECTION.
Engineering Measures.
Provide adequate ventilation. Where reasonably practicable this should be
achieved by the use of local exhaust ventilation and good general extraction. If
these are not sufficient to maintain concentrations of particulates and solvent
vapor below the OEL, suitable respiratory protection must be worn.
Exposure Limits.
Occupational exposure limit for:
EINECS-No. Names STEL LTEL
204-658-1 n-butyl acetate 200 150 ppm
265-199-0 Solvent naphtha (petroleum), light arom.; Low boiling point
naphtha unspecified
2 0 ppm
265-198-5 Solvent naphtha (petroleum), heavy arom.; Kerosine
unspecified
2 0 ppm
Personal Protection.
Respiratory protection:
If workers are exposed to concentrations above the exposure limit they must
use appropriate, certified respirators.
Hand protection:
For prolonged or repeated handling, use
Barrier creams may help to protect the exposed areas of the skin, they
should however not be applied once exposure has occurred.
Eye protection:
Use safety eyewear designed to protect against splash of liquids.
Skin protection:
Personnel should wear anti-static clothing made of natural fiber or of
high temperature resistant synthetic fiber.
9. PHYSICAL AND CHEMICAL PROPERTIES.
Physical state viscous. Method:
flash point 28 DIN 53213
viscosity at 20 掳C 35 s 4 mm DIN 53211
specific gravity 1.05
vapor density 5
lower explosion limit 0.6
solubility in water not soluble
10. STABILITY AND REACTIVITY.
Stable under recommended storage and handling conditions (See section 7). When
exposed to high temperatures may produce hazardous decomposition products such
as carbon monoxide and dioxide, smoke, oxides of nitrogen etc. Keep away from
oxidizing agents, strongly alkaline and strongly acid materials in order to avoid
exothermic reactions.
11. TOXICOLOGICAL INFORMATION.
There are no data available on the preparation itself. The preparation has been
assessed following the conventional methods of the Dangerous Preparations
Directive 1999/45/EC and classified for toxicological hazards accordingly. See
Chapter 2 and 15 for details.
Exposure to component solvents vapors concentration in excess of the stated
occupational exposure limit may result in adverse health effects such as mucous
membrane and respiratory system irritation and adverse effects on kidney, liver
and central nervous system. Symptoms and signs include headache, dizziness,
fatigue, muscular weakness, drowsiness and in extreme cases, loss of
consciousness.
Material Safety Data Sheet according 91/155/EEC
Product Name: B712 CHROME FX BASECOAT
Date: 09.26.05 Revision date: 09.26.05 page: 4/5
Solvents may cause some of the above effects by absorption through the skin.
Repeated or prolonged contact with the preparation may cause removal of natural
fat from the skin resulting in non-allergic contact dermatitis and absorption
through the skin. The liquid splashed in the eyes may cause irritation and
reversible damage.
12. ECOLOGICAL INFORMATION. *
The product should not be allowed to enter drains or water courses.
13. DISPOSAL CONSIDERATIONS.
Do not allow into drains or water courses.
Wastes and emptied containers should are to be deposited according to
the official rules.
Code of waste Waste Designation:
080111 waste paint and varnish containing organic solvents or other
dangerous substances
14. TRANSPORT INFORMATION.
Transport only in accordance with ADR for road, RID for rail, IMDG for
sea and ICAO/IATA for air transport.
ADR/RID Class: 3
Tremcard: 3
UN-No: 1263
Transport document name: paint and paint related material
Packaging group: III
IMDG Class: 3
EmS: F-E, S-E
UN-No: 1263
Proper shipping name: PAINT
Packaging group: III
marine pollutant: n.a.
ICAO/IATA Class: 3
UN No: 1 63
2
Proper shipping name: paint and paint related material
Packaging group: III
15. REGULATORY INFORMATION.
In accordance with requirements of the Classification Packaging and
Labelling of Dangerous Substances Regulations. The product is labeled as
follows:
Danger classification:
n.a.
Contains:
n.a.
R-phrases:
10 Flammable.
52/53 Harmful to aquatic organisms may cause long-term adverse effects
in the aquatic environment.
66 Repeated exposure may cause skin dryness or cracking.
67 Vapors may cause drowsiness and dizziness.
S-phrases:
Material Safety Data Sheet according 91/155/EEC
Product Name: B712 CHROME FX BASECOAT
Date: 09.26.05 Revision date: 09.26.05 page: 5/5
24 Avoid contact with skin.
38 In case of insufficient ventilation wear suitable
respiratory equipment.
51 Use only in well-ventilated areas.
61 Avoid release to the environment. Refer to special
instructions/safety data sheets.
23 Do not breathe vapor.
other phrases:
n.a.
16. OTHER INFORMATION.
Full text of R-phrases with no. appearing in section 2:
10 Flammable.
66 Repeated exposure may cause skin dryness or cracking.
67 Vapors may cause drowsiness and dizziness.
37 Irritating to respiratory system.
51/53 Toxic to aquatic organisms, may cause long-term adverse
effects in the aquatic environment.
65 Harmful: may cause lung damage if swallowed.
The information of this MSDS is based on the present state of our knowledge and
on current EU and national laws. The product is not to be used for other purposes
than those specified under section 1 without first obtaining written handling
instruction. It is always the responsibility of the user to take all necessary
steps in order to fulfill the demand laid down in the local rules and legislation.
The information in this MSDS is meant as a description of the safety requirements
of our product: it is not to be considered as a guarantee of the products'
properties.
|