MATERIAL SAFETY DATA SHEET Page 1 of 4
HMIS RATINGS:
Health: 2
Flammability: 4
Reactivity: 0
Personal Protection: G
__________________________________________________________________________________________________
Section 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Trade Name: GENERAL PURPOSE SPRAY ADHESIVE Emergency Telephone Number: (800)535-5053
Chemical Family: Aerosol Date Prepared: April 25, 2003
Company Identification: ABC COMPOUNDING CO., INC. MSDS Number: RA-611
P.O. BOX 16247 MFGD. BY: ABC Compounding Co., Inc.
ATLANTA, GA. 6970 Jonesboro Rd.
Morrow, Ga. 30260
__________________________________________________________________________________________________
Section 2: COMPOSITION, INFORMATION ON INGREDIENTS
CAS CHEMICAL % BY OSHA PEL/ SARA SARA STATE
NUMBER NAME WGHT. ACGIH TLV 302/304(1)* 313 (2)* INFO(3)(4)
110-54-3 Hexane < 28.0 50 ppm / NO YES NO
50 ppm
67-64-1 Acetone < 21.0 750 ppm / NO NO YES(3)
500 ppm
MAR 22
- Propellent Mixture - - - - -
74-98-6 Propane - 1000 ppm NO NO NO
106-97-8 N-Butane - 800 ppm NO NO NO
* See Section 15 for more information n/e = none established - n/a = not applicable
__________________________________________________________________________________________________
Section 3: HAZARDS IDENTIFICATION
__________________________________________________________________________________________________
EMERGENCY OVERVIEW
DANGER. Extremely flammable. Contents under pressure. Harmful or fatal if
swallowed. Aspiration hazard if swallowed. Vapor harmful. Keep away from
heat and flame. Can cause nervous system depression.
__________________________________________________________________________________________________
Primary Route of Entry:Skin contact, inhalation
Acute/Potential Health Effects:
EYES: May cause mild eye irritation. Symptoms include stinging, tearing and redness.
SKIN: May cause mild skin irritation. Prolonged or repeated contact may dry the skin.
Symptoms may include redness, burning, drying of skin and skin burns.
INHALATION: High vapor/aerosol concentrations (>1000 ppm) are irritating to the eyes
and respiratory tract. May cause headaches, dizziness, anesthesia, drowsiness,
unconsciousness and other central nervous system effects, including death.
May cause peripheral nervous system disorder and/or damage.
INGESTION: Harmful or fatal if swallowed. Aspiration hazard - this material can enter
lungs during swallowing or vomiting and cause lung inflammation and damage.
MATERIAL SAFETY DATA SHEET Trade Name: GENERAL PURPOSE SPRAY ADHESIVE
Page 2 of 4
MSDS Number: RA-611
__________________________________________________________________________________________________
Section 3: HAZARDS IDENTIFICATION - continued:
Chronic / Long Term Effects: Reports have associated repeated and prolonged occupational
overexposure to solvents with permanent brain and nervous system damage.
Signs and Symptoms of Overexposure: Signs and symptoms of exposure to this material
through breathing, swallowing, and/or passage of material through the skin may include:
stomach or intestinal upset (nausea, vomiting, diarrhea) irritation (nose, throat,
airways), central nervous system depression (dizziness, drowsiness, weakness, fatigue,
nausea, headache, unconsciousness).
Target Organ Effects: No data.
Reproductive/Developmental Information: No data.
Carcinogenic Information: This material is not listed as a carcinogen by IARC, NTP or
OSHA.
__________________________________________________________________________________________________
Section 4: FIRST AID MEASURES
EYES: Immediately flush eyes with plenty of water for at least 15 minutes. Get
medical attention immediately.
SKIN: Immediately flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Wash clothing before reuse
Get medical attention immediately.
INHALATION: Remove to fresh air. If not breathing, give artificial respiration.
If breathing is difficult, give oxygen.
INGESTION: Seek medical attention immediately. Aspiration hazard: Do not induce
vomiting or give anything by mouth because this material can enter the lungs and
cause severe lung damage. Do not leave individual unattended.
__________________________________________________________________________________________________
Section 5: FIRE FIGHTING MEASURES
Flash Point: 0 deg. F (TCC Method) Flame Extensio n: >18", Positive Flashback
Extinguishing Media: Dry chemical, CO2 or foam is recommended.
Special Fire Fighting Instructions: EXTREMELY FLAMMABLE. Contents under pressure.
Cool exposed containers with water spray to prevent bursting. SCBA should be used
whenever chemical fires are present.
__________________________________________________________________________________________________
Section 6: ACCIDENTAL RELEASE MEASURES
Stop all leaks. Isolate hazard area. Keep unnecessary and unprotected personnel
from entering. Eliminate all ignition sources. Disperse vapors with water spray.
Prevent runoff from entering drains, sewers, streams or other bodies of water.
Absorb spill with inert material. Absorb unrecoverable product. Transfer contaminated
absorbent, soil and other materials to containers for disposal.
__________________________________________________________________________________________________
Section 7: HANDLING AND STORAGE
Do not use or store near heat, sparks or open flame. Exposure to temperatures above
120 F may cause bursting. Do not puncture or incinerate container. Store in a cool,
dry place. Do not get in eyes, on skin or on clothing. Intentional misuse by deliberat-
ely concentrating and inhaling may be harmful or fatal. Keep out of reach of children.
__________________________________________________________________________________________________
Section 8: EXPOSURE CONTROLS and PERSONAL PROTECTION
Eye Protection: Wear safety glasses or goggles.
MATERIAL SAFETY DATA SHEET Trade Name: GENERAL PURPOSE SPRAY ADHESIVE
Page 3 of 4
MSDS Number: RA-611
Skin Protection: To prevent repeated or prolonged contact, wear impervious gloves
(made from rubber, nitrile or neoprene).
Respiratory Protection: When respiratory protection is required, use an organic vapor &
particulate cartridge. All respiratory programs must meet OSHA's 29 CFR 1910.34 &
ANSI Z88.2 requirements.
Engineering Controls: Good general ventilation required.
__________________________________________________________________________________________________
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance and Odor: Clear, colorless spray/mist with solvent odor
pH Concentrate: n/a
Solubility in Water: Insoluble
Vapor Pressure [mmHg]: n/e
Evaporation Rate (Butyl Acetate=1): n/e
Vapor Density [Air=1]: n/e
Specific Gravity [H20=1]: 0.80
Boiling Point: n/a
__________________________________________________________________________________________________
Section 10: REACTIVITY
Stability: Stable
Hazardous Polymerization: Will not occur
Conditions to avoid: High temperature
Hazardous Decomposition Products: CO, CO2
Incompatibility: Acids and strong oxidizers
__________________________________________________________________________________________________
Section 11: TOXICOLOGICAL INFORMATION
No data.
__________________________________________________________________________________________________
Section 12: ECOLOGICAL INFORMATION
No data.
__________________________________________________________________________________________________
Section 13: DISPOSAL CONSIDERATIONS
Waste Disposal Method:
Waste must be disposed of in accordance with federal, state and local environmental
control regulations. See label for further instructions.
__________________________________________________________________________________________________
Section 14: TRANSPORTATION INFORMATION
D.O.T. Shipping Name / Class:
Consumer Commodity, ORM-D
(Domestic Ground Shipments)
__________________________________________________________________________________________________
Section 15: REGULATORY INFORMATION
U.S. Federal Regulations:
TSCA (Toxic Substances Control Act): The intentional ingredients of product are listed.
MATERIAL SAFETY DATA SHEET Trade Name: GENERAL PURPOSE SPRAY ADHESIVE
Page 4 of 4
MSDS Number: RA-611
Title III Section 311/312 Hazardous Categories - 40 CFR 370.2:
ACUTE (X) Chronic (X) Fire (X) Pressure (X) Reactive ( ) Not Applicable ( 0
(1) Title III Section 302/304 Extremely Hazardous Substances - 40 CFR 355 Appendix A
(2) Title III Section 313 Toxic Chemicals - 40 CFR 372.65
If indicated under Section 2 of this MSDS, this product contains toxic chemicals
subject to the reporting requirements of Section 313 of the Emergency Planning &
Community Right to Know Act of 1986. This information must be included in all
MSDS that are copied and distributed for this material.
RCRA Status: Under RCRA, it is the responsibility of the product user to determine
at the time of disposal, whether a material containing the product or derived from
the product should be classified as a hazardous waste. If this product becomes a
hazardous waste it would be assigned RCRA Code(s)
D001
State and Local Regulations: Certain states maintain their own ingredient lists which
differ slightly from the Federal standards. If indicated under Section 2 of this MSDS,
states listed below may have regulations on ingredients contained in this product.
Check with your state for any additional regulations.
(3) California proposition 65 (Safe Drinking Water & Toxic Enforcement Act of 1986)
(4) Massachusetts (Hazardous Substance Disclosure by Employers)
__________________________________________________________________________________________________
Section 16: OTHER INFORMATION
This information was compiled from current manufacturer's MSDS's of the component
parts of the product.
Disclaimer: The Manufacturer believes that the information contained in the Material
Safety Data Sheet is accurate. The suggested procedures are based on experience as
of the date of publication. They are not necessarily all inclusive nor fully adequate
in every circumstance. Also, the suggestions should not be confused with, nor followed
in violation of applicable laws, regulations, rules or insurance requirements.
|