5 STAR MATERIAL SAFETY DATA SHEET DATE: 7-16-07
XTREME EUROSTAR KLEARKOTE & ACTIVATORS 4.2 VOC #6101
SECTION 1 - MANUFACTURER
Manufacturer: ABI/AUTOBODY BRANDS INTERNATIONAL FOR CHEMICAL EMERGENCY
A division of IAMG/International Autobody Mkg. Group CHEMTREC: 1-800-424-9300
9419 E. San Salvador Drive Suite 104 CANUTEC: 1-613-996-6666
Scottsdale, AZ 85258 (For Canada Call Collect)
Phone: 877-REFINISH
www.autobodybrands.com
Product: Refinish DOT Shipping Name: Paint UN1263
Hazardous Materials Information: See Section 10 OSHA Hazard Class: Flammable Liquid
SECTION 2 ?HAZARDOUS INGREDIENTS (see section 10)
HAZARDOUS INGREDIENT EMERG. N CAS NO ACGIH OSHAA STEL* HMIS* FLASH VAPOR
PLAN* O TLV PEL * H-F-R POINT PRESSURE
T ppm ppm ppm T.C.C./F mm/Hg.
E
1,3,5-TRIMETHYLBENZENE 108-67-8
1,6-HEXAMETHYLENE DISOCYANTE 822-06-0
1-METHOXY-2-PROPANOL 107-98-2
2,4, PENTANEDIONE YES 123-54-6 20 20 3-3-1 96 6.8 @68癋
2-BUTOXYETHYL ACETATE NO 112-07-02 N/E N/E N/E 2-2-0 160 0.2 @ 68癋
ACETONE YES 67-64-1 750 750 1000 1-3-0 <-1.0 182 @68癋
ALIPHATIC POLYMERIC ISOCYANATE 3779-63-3
AROMATIC HYDROCARBONS NO 64742-95-6 50 50 150 1-3-0 110 4 @ 68癋
BENZOTRIAZOLE UV ABSORBANT 25973-55-1
CELLULOSE ACETATE BUTYRATE NO 9004-36-8 N/E N/E N/E N/E N/A N/A
CYCLOALIPHATIC POLYISOCYANATE 53880-05-0
DIBASIC ESTER NO 1119-40-0 N/E N/E 1-1-0 212 0.2 @68癋
DIETHYLENE GLYCOL YES 112-34-5 N/E N/E 1-2-0 226 .10 @77癋
MONOBUTYL ETHER PMCC
DIISOBUTYL KETONE NO 108-83-8 25 25 N/E 2-2-0 120 1.7 @68癋
DIMETHYL PHTHALATE 131-11-3 5.0 5.0 mg/m3 2-2-1 300 13.0@ 302癋
ETHANOL 64-17-5
ETHYL 3-ETHOXY PROPINATE YES 763-69-9 N/E N/E 100 1-2-0 136 1.5 @ 77癋
ETHYL ACETATE YES 141-78-6 400 400 N/E 1-3-0 24 86 @ 68癋
ETHYL BENZENE NO 3 100-41-4 100 100 150 2-3-0 77 7.10 @68癋
ETHYLENE GLYCOL MONO- NO 111-15-9 25 25 1-2-0 154 0.6 @68癋
ETHYL ETHER ACETATE
ETHYLENE GLYCOL N-BUTYL ETHER NO 111-76-2 N/E N/E 1-2-0 165 .88 @77癋
HEPTYL ACETATE NO 90438-79-2 N/E N/E 1-2-0 151 1 @68癋
HEXYL ACETATE NO 88230-35-7 N/E N/E 1-2-0 135 1.4 @68癋
HYDROXY ACRYLIC RESIN A NO N/A N/E N/E N/E N/A N/A N/A
HYDROXY ACRYLIC RESIN B NO N/A N/E N/E N/E N/A N/A N/A
ISOBUTYL ACETATE NO 110-19-0 150 150 187 1-3-0 62 14.8 @68癋
ISOBUTYL ALCOHOL NO 78-83-1 N/E N/E 2-2-0 85 8.8 @68癋
ISOPHORONE DIISOCYANATE 4098-71-9
ISOPROPYL ALCOHOL YES 67-63-0 400 400 500 1-3-0 53 32 @68癋
MEK PEROXIDE 1338-23-4 0.2 0.2 2-2-1 24 85@ 68癋
METHYL AMYL KETONE NO 110-43-0 50 100 N/E 1-2-0 102 2.1 @68癋
METHYL ETHYL KETONE YES 78-93-3 200 200 300 3-3-0 16 85 @68癋
METHYL ISOBUTYL KETONE YES 108-10-1 50 50 75 2-3-0 60 16 @68癋
METHYL PROPYL KETONE NO 107-87-9 200 200 250 2-3-0 46 27 @68癋
MINERAL SPIRITS NO 8032-32-4 100 100 100 1-2-0 100 <1 @68癋
N-BUTYL ACETATE YES 123-86-4 150 150 200 2-3-0 81 10 @ 68癋
N-BUTYL ALCOHOL YES 71-36-3 50 50 N/E 2-3-0 97 5.5 @68癋
N-HEPTANE NO 142-82-5 400 400 1-3-0 20 60 @77癋
PESEUDOCUMENE 95-63-6
PETROLEUM NAPHTHA NO 8032-32-4 300 300 N/E 2-3-0 3.4 @ 68癋
POLYETHYLENE/VINYL ACETATE
POLY-FUNCTIONAL KETIMINE 152 300 16@69.8癋
POLYMERIC HEXAMETHYLENE
DIISOCYANATE NO 1 822-06-0 0.05 0.02 3-0-0 N/E N/E
POLYMERIC ISOPHRONE NO 2 4098-71-9 N/E N/E 2-1-0 N/E N/E
DIISOCYANATE
PROPYLENE GLYCOL MONO- NO 108-65-6 N/E N/E N/E 2-3-0 114 Seta 2.4 @68癋
MSDS 16 Page 1 12/21/07
METHYL ETHER ACETATE Closed
PROPYLENE GLYCOL MONOMETHYL YES 107-98-2 100 100 2-3-0 94 OPEN 11 @77癋
ETHER CUP
PROPYLENE GLYCOL MONOMETHYL NO 108-65-6 N/E N/E N/E 2-3-0 114 SETA 2.4 @ 68癋
ETHER ACETATE CLOSED
SOLVENT NAPHTHA (PETROLEUM), NO 64742-95-6 100 100 N/E 2-3-0 110 4@68癋
LIGHT AROMATIC
TOLUENE YES 4 108-88-3 50 100 150 2-3-0 45 47 @ 68癋
TRIMER OF HEXAMETHYLENE YES 1 3779-63-3 25 25 N/E 2-2-1 117 N/E
DIISOCYANATE
VM&P NAPHTHA NO 64742-89-8 N/E N/E 1-3-0 18 38 @68癋
XYLENE YES 3 1330-20-7 100 100 150 2-3-0 80 9.5 @68癋
* Subject to the reporting requirements of section 313 of the Emergency Planning and Community Right to Know Act of 1986 and 40CFR372.
** Short Term Exposure Limit
Note 1 - Free Hexamethylene Diisocyanate monomer (HDI) is less than 0.7% by weight of total HDI
Note 2 - Free Isophrone Diisocyanate monomer (IPDI) is less than 0.7% by weight of total IPDI
Note 3 - Xylene contains 18-20% Ethyl Benzene (cas#100-41-4) having PEL of 100 ppm, TLV of 100 ppm & STEL of 125 ppm.
Note 4 - Toluene is known to the state of California to cause birth defects or other reproductive harm.
N/E - Not establisihed as reported by manufacturer.
SECTION 3 ?PHYSICAL DATA
Evaporation rate: Less than ether Vapor density: Heavier than air
Solubility in water: Miscible Percent volatile by volume: 19.4% - 80.9%
Percentage volatile by weight: 15.3 ?76.0% Boiling range: 129癋-473癋/54 癈 - 245癈
Gallon weight: 6.61 ?14.10 lb/gallon V.O.C: 0.0 - 7.5 lb/gallon
SECTION 4 ?FIRE & EXPLOSION DATA
Flash point (closed cup): -4 to 160OF.
Flammable limits: 0.8% - 14%
Extinguishing media: foam, carbon dioxide, and dry chemical.
Special fire fighting procedures: Full protective equipment, including self-contained breathing apparatus is recommended. Water from fog nozzles may be
used to cool closed containers to prevent pressure build up.
Unusual fire & explosion hazards: When heated above the flash point, emits flammable vapors which, when mixed with air, can burn or be explosive.
Fine mists or sprays may be flammable at temperatures below the flash point.
SECTION 5 ?HEALTH HAZARD DATA
General Effects:
Ingestion: Gastrointestinal distress. In the unlikely event of ingestion, call a doctor immediately and have the names of the ingredients available. Do not.
Induce vomiting.
Inhalation: May cause nose and throat irritation. Repeated and prolonged overexposure to solvents may lead to permanent brain and nervous system
damage. Eye watering, headaches, nausea, dizziness, and loss of coordination are signs that solvent levels are too high. Exposure to isocyanates may cause
respiratory sensitization. This effect may be permanent. Symptoms include and asthma-like reaction with shortness of breath, wheezing or coughing which
may be permanent. This effect may be delayed for several hours after exposure. Repeated overexposure to isocyanates may cause a decrease in lung
function, which may be permanent. Individuals with lung or breathing problems or prior reaction to isocyanates must not be exposed to the vapors or spray
mist of this product. If affected by inhalation of vapor or spray mist, remove to fresh air. If breathing difficulty persists, or occurs later, consult a physician.
Skin or eye contact: May cause irritation or burning of the eyes. Repeated or prolongs liquid contact may cause skin irritation with discomfort and
dermatitis. In case of eye contact, immediately flush with plenty of water for at least 15 minutes; call a physician. In case of skin contact, wash with soap and
water. If irritation occurs, contact a doctor.
Special Effects:
Aromatic hydrocarbon A, B; VM&P Naphtha ?laboratory studies with rats have shown that petroleum distillates cause kidney damage and kidney or liver
tumors. These effects were not seen in similar studies with guinea pigs, dogs or monkeys. Several studies evaluating petroleum workers have not shown a
significant increase of kidney damage or an increase in kidney or liver tumors.
Butyl acetate ?may cause abnormal liver function. Tests for embryotoxic activity in animals have been conclusive. Has been toxic to the fetus in laboratory
animals at doses that are toxic to the mother.
Methyl ethyl ketone ?High concentrations have caused embryotoxic effects in laboratory animals. Methyl ethyl ketone has been demonstrated to potentiate
(i.e., shorten the time of onset) the peripheral neuropathy caused by either n-hexane or methyl n-butyl ketone. MEK by itself has not been demonstrated to
cause peripheral neuropathy. Liquid splashes in the eye may result in chemical burns.
Toluene ?Recurrent overexposure may result in liver and kidney injury. High airborne levels have produced irregular heartbeat in animals and occasional
palpitations in humans. Rats exposed to very high airborne levels have exhibited high frequency hearing defects. The significance of this to man is unknown.
Warning: This chemical is known to the State of California to cause birth defects or other reproductive harm
Xylene ?High concentrations have caused embryotoxic effects in laboratory animals. Recurrent overexposure may result in liver and kidney injury. Can be
absorbed through the skin in harmful amounts
Diethylene Glycol- Monobutyl Ether: Contact may cause skin irritation with discomfort or rash. Can be absorbed through the skin in harmful amounts.
Recurrent overexposure may result in liver and kidney injury. High doses in laboratory animals have shown n on specific effects such as irritation, weight loss,
moderate blood changes. Tests for mutagenic activity in bacterial or mammalian cell cultures have been inconclusive. Ethyl acetate: Prolonged and repeated
high exposures of laboratory animals resulted in secondary anemia with an increase in white blood cells; fatty degeneration, cloudy swelling, and an excess of
blood in various organs.
Aliphatic Polyisocyanate or Polymeric Isophorone Diisocyanate or Polyisocyanate: Repeated exposure may cause allergic skin rash, itching,
swelling. Repeated overexposure to isocyanantes may cause lung injury, including a decrease in lung function, which may be permanent. Over exposure may
cause asthma-like reactions with shortness of breath, wheezing, cough which may be permanent or permanent lung sensitization? This effect may be delayed
for several hours after exposure. Individuals with pre-existing lung disease, asthma or breathing difficulties may have increased susceptibility to the toxicity of
excessive exposures.
1,6 Hexamethylene Diisocyanate: May cause temporary upper respiratory and/or lung irritation with cough, difficult breathing, or shortness of breath.
Over exposure may cause asthma-like reactions with shortness of breath, wheezing, cough or permanent lung sensitization. This effect may be delayed for
several hours after exposure. Prolonged skin contact may cause chemical burns. Liquid splashes in the eye may result in chemical burns. Individuals with pre-
existing lung disease, asthma or breathing difficulties may have increased susceptibility to the toxicity of excessive exposures.
Ethylene Glycol Monobutyl Ether Acetate: Can be absorbed through the skin in harmful amounts. May destroy red blood cells. May cause abnormal
kidney function.
MSDS 16 Page 2 12/21/07
Ethyl acetate resulted in secondary anemia with and increase in white blood cells, fatty degeneration, cloudy swelling, and an excess of blood in various
organs.
SECTION 6 ?REACTIVITY DATA
Stability: Stable
Incompatibility (materials to avoid): None reasonably foreseeable
Hazardous decomposition products: CO, CO2, smoke
Hazardous polymerization: Will not occur
SECTION 7 - SPILL or LEAK PROCEDURES
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Provide maximum ventilation. Only personnel equipped with proper respiratory,
skin, and eye protection should be permitted in the area. Remove all sources of ignition. Take up spilled material with sand, vermiculite, or other non-
combustible absorbent material and place in clean, empty containers for disposal. Only the spilled material and the absorbent should be placed in this
container.
WASTE DISPOSAL METHOD: Waste material must be disposed of in accordance with federal, state, provincial, and local environmental control regulations.
Empty containers should be recycled or disposed of through an approved waste management facility.
SECTION 8 ?SPECIAL PRECAUTIONS
Respiratory: DO NOT breathe vapors or mists. Wear a positive pressure supplied air respirator (NIOSH/MSHA TC-19C) while mixing activator with any paint
or clear enamel, during application and until all vapors and spray mists are exhausted. Individuals with a history or lung or breathing problems or prior
reaction to isocyanate should not use or be exposed to this product. DO NOT permit anyone without protection in the painting area. Follow the respirator
manufacturer's directions for respirator use.
Ventilation: Provide sufficient ventilation in volume and pattern to keep contaminants below applicable OSHA requirements.
Protective clothing: Neoprene gloves and coveralls are recommended.
Eye protection: Desirable in all industrial situations. Include splashguards or side shields.
Precautions to be taken in handling and storing: Observe label precautions. Keep away from heat, sparks, and flame. Close container after use. Ground
containers when pouring. Wash thoroughly after handling and before eating or smoking. Do not store above 120癋.
Other precautions: Do not sand, flame cut, braze or weld dry coating without a NIOSH/MSHA approved respirator or appropriate ventilation.
SECTION 10 ?OTHER INFORMATION
Section 313 Supplier Notification: The chemicals listed below with percentages are subject to the reporting requirements of Section 313 of the Emergency
Planning and Right-To-Know Act of 1986 and of 40 CFR 372.
Product Code: XTREME EUROSTAR Clearcoat 4.2 VOC
Hydroxy Acrylic Resin A, Hydroxy Acrylic Resin B, Solvent naphtha (petroleum) light aromatic, Propylene Glycol Monomethyl Ether Acetate, 2-butoxyethyl
acetate, n - Butyl Acetate, Acetone (22.36%).
Gallon Weight: 7.86 Solvent Density: Heavier than air
% Solids by Weight: 46.25 H: 2 F: 3 R: 0
% Solids by Volume: 48.00 Flash Point: 75癋
V.O.C lb Gal: 3.263 OSHA Storage: 1B
V.O.C grams: 391
V.O.C lb Gal less exempt: 3.38
V.O.C grams pl less exempt: 405
Product Code: XTREME EUROSTAR FAST Activator 4.2 VOC
Trimer of hexamethylene diisocyanate (40-50%), n ?Butyl Acetate, 2-butoxyethyl acetate, Toluene, hexamethylene diisocyanate (.1-1%), peseudocumene.
Gallon Weight: 7.90 Solvent Density: Heavier than air
% Solids by Weight: 32.50 H: 3 F: 3 R: 1
% Solids by Volume: 33.00 Flash Point: 70癋
V.O.C lb Gal: 5.33 OSHA Storage: 1B
V.O.C grams: 640
Product Code: XTREME EUROSTAR MEDIUM Activator 4.2 VOC
Trimer of hexamethylene diisocyanate (40-50%), Solvent naphtha (petroleum) light aromatic, n ?Butyl Acetate, Xylene, 2-butoxyethyl acetate, hexamethylene
diisocyanate (.1-1%), peseudocumene.
Gallon Weight: 8.11 Solvent Density: Heavier than air
% Solids by Weight: 32.50 H: 3 F: 3 R: 1
% Solids by Volume: 33.00 Flash Point: 70癋
V.O.C lb Gal: 5.48 OSHA Storage: 1C
V.O.C grams: 658
Product Code: XTREME EUROSTAR Slow/Low bake Activator 4.2 VOC
Trimer of hexamethylene diisocyanate (40-50%), Solvent naphtha (petroleum) light aromatic, 2-butoxyethyl acetate, Propylene Glycol Monomethyl Ether
Acetate, hexamethylene diisocyanate (.1-1%), peseudocumene.
Gallon Weight: 8.24 Solvent Density: Heavier than air
% Solids by Weight: 35.00 H: 3 F: 3 R: 1
% Solids by Volume: 36.00 Flash Point: 70癋
V.O.C lb Gal: 5.35 OSHA Storage: 1C
V.O.C grams: 643
MSDS 16 Page 3 12/21/07
|