Material Safety Data Sheet
Section 1 - Chemical Product and Company Identification
Product/Chemical Name: Elta MD UV Shield SPF 45
Chemical Formula: N/A
CAS Number: N/A
Other Designations: N/A
General Use: Topical
Contact: Swiss-American Products, Inc. 2055 Luna Rd., Suite 126 Carrollton, TX 75006 Phone: 972-385-2900
Revision: Rev. 5
Date Prepared: 3/19/09
Section 2 ?Composition Information on Ingredients
Ingredient Name CAS Number %wt or % Vol
Purified Water 7732-18-5 Proprietary
Octinoxate 5466-7-3 7.5% w/w
Zinc Oxide 131413-2 9.0% w/w
Citric Acid 77-92-9 Proprietary
Cetearyl Glucoside None Proprietary
Oleth-3 Phosphate None Proprietary
Isopropyl Palmitate 142-96-6 Proprietary
Cetearyl Alcohol & Polysorbate 60 None Proprietary
Tocopheryl Acetate None Proprietary
Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer None Proprietary
Polyisobutene None Proprietary
PEG-7 Trimethylolpropane Coconut Ether None Proprietary
Polyether-1 None Proprietary
Octyl Stearate None Proprietary
Phenoxyethanol None Proprietary
Iodopropynyl Butylcarbamate None Proprietary
Butylene Glycol None Proprietary
Triethoxycaprlylsilane None Proprietary
Section 3 - Hazards Identification
HMIS
Emergency Overview H 1
F 0
PH 0
Potential Health Effects PPE B
Primary Entry Routes: Skin contact, inhalation, ingestion, eye contact.
Target Organs: Not known
Acute Effects: None known
Inhalation: Not considered an inhalation hazard.
Eye: Avoid contact with eyes.
Skin: Based on product history, lack of consumer complaints, and label directions, this product should be safe if used
as intended.
Ingestion: Avoid ingestion.
Carcinogenicity: This material is not known to have carcinogenic properties.
Medical Conditions Aggravated by Long-Term Exposure: None known
Chronic Effects: None known
MSDS Elta MD UV Shield.doc Page 1 of 4
Section 4 - First Aid Measures
Inhalation: Not a hazard
Eye Contact: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Contact
physician if irritation persists.
Skin Contact: Not a hazard.
Ingestion: Consult a physician
Special Precautions/Procedures: None known
Section 5 - Fire-Fighting
NFPA:
Flash Point: Not determined
Flash Point Method: Not determined
Burning Rate: Not determined
0
Autoignition Temperature: Not determined
LEL (% vol in air): Not known
UEL(% vol in air): Not known
1 0
Flammability Classification: Non-Flammable
Extinguishing Media: Carbon Dioxide, Dry chemical, Foam.
Unusual Fire or Explosion Hazards: None known
0
Hazardous Combustion Products: None known
Fire-Fighting Instructions: Do not release runoff from fire control methods to sewers or waterways.
Fire-Fighting Equipment: Protective clothing should be worn.
Section 6 - Accidental Release Measures
Spill /Leak Procedures: Contain all spill and leaks to prevent discharge into environment. Ventilate area and
evacuate area of all non-essential personnel.
Small Spills: Soak up with absorbant, shovel into waste container, flush area with water.
Large Spills: Soak up with absorbant, shovel into waste container, flush area with water
Containment: Recover material for proper disposal.
Regulatory Requirements: Follow applicable OSHA regulations (29 CFR 1910.120) and local, state, and federal
regulations.
Section 7 - Handling and Storage
Handling Precautions: Spilled material is slippery. Wash thoroughly after handling.
Storage Requirements: Store in a well ventilated area and between 40oF and 86oF. Avoid overheating and freezing.
Regulatory Requirements: None known
Section 8 - Exposure Controls / Personal Protection
Engineering Controls: None known
Ventilation: General ventilation recommended
Administrative Controls: None required for normal use
Respiratory Protection: None required for normal use
Protective Clothing/Equipment: None required for normal use. For prolonged exposure, use appropriate goggles,
protective clothing and gloves.
Comments: Never eat, drink, or smoke in work areas. Practice good personal hygiene after using this material, especially
before eating, drinking, smoking, using the toilet, or applying cosmetics.
MSDS Elta MD UV Shield.doc Page 2 of 4
Section 9 - Physical and Chemical Properties
Physical State: Cream Water Solubility: Yes
Appearance and Odor: Opaque Cream Other Solubilities: Not determined
Odor Threshold: Not determined Boiling Point: 100?C
Vapor Pressure: Not determined Freezing/Melting Point: Not determined
Viscosity @ 25oC: 100,000
Vapor Density (Air-=1): Not determined
Formula Weight: N/A Refractive Index: Not determined
Density: Not determined Surface Tension: Not determined
Specific Gravity (H20=1, at 25?C): 1 % Volatile: Not determined
pH (@ 25oC: 8.50 Evaporation Rate (nBuAc = 1): Not determined
Section 10 - Stability and Reactivity
Stability: Product is stable
Polymerization: Hazardous polymerization will not occur.
Chemical Incompatibilities: None known
Conditions to Avoid: None known
Hazardous Decomposition Products: None known
Section 11 - Toxicological Information
Toxicity Data:
Eye Effects: Not considered an eye irritant but avoid contact with eyes. Chronic Effects: Not determined
Skin Effects: Not an irritant Carcinogenicity: Not carcinogenic
Acute Inhalation Effects: Not applicable Mutagenicity: Not mutenagenic
Acute Oral Effects: None known Teratogenicity: Not teratogenic
Section 12 - Ecological Information
Ecotoxicity: Not considered an environmental hazard
Environmental Fate: Not considered an environmental hazard
Environmental Degradation: Not considered an environmental hazard
Soil Absorption/Mobility: Not considered an environmental hazard
Section 13 - Disposal Considerations
Disposal: Contact your supplier or a licensed contractor for detailed recommendations. Follow applicable Federal, state,
and local regulations.
Disposal Regulatory Requirements: Check local, state and federal requirements
Container Cleaning and Disposal: Discard in suitable trash container
Section 14 - Transport Information
DOT Transportation Data (49 CFR 172.101):
Not regulated
Section - 15 Regulatory Information
EPA Regulations: None known
OSHA Regulations: None known
State Regulations: May vary from state to state
MSDS Elta MD UV Shield.doc Page 3 of 4
Section 16 - Other Information
Additional Hazard Rating Systems: None Known
Prepared by: Swiss-American Products, Inc. 2055 Luna Rd., Suite 126 Carrollton, TX 75006
Disclaimer: ALL INFORMATION, RECOMMENDATIONS, AND SUGGESTIONS APPEARING HEREIN CONCERNING OUR PRODUCT ARE BASED UPON
TESTS AND DATA BELIEVED TO BE RELIABLE. HOWEVER, IT IS THE USER'S RESPONSIBILITY TO DETERMINE THE SAFETY, TOXICITY, AND
SUITABILITY FOR HIS OWN USE OF THE PRODUCT DESCRIBED HEREIN. SINCE THE ACTUAL USE BY OTHERS IS BEYOND OUR CONTROL, NO
GUARANTEE, EXPRESSED OR IMPLIED, IS MADE BY SWISS-AMERICAN PRODUCTS, INC. AS TO THE EFFECTS OF SUCH USE, THE RESULTS TO BE
OBTAINED, OR THE SAFETY AND TOXICITY OF THE PRODUCT. THE INFORMATION HEREIN IS NOT TO BE CONSTRUED AS ABSOLUTELY COMPLETE
SINCE ADDITIONAL INFORMATION MAY BE NECESSARY OR DESIRABLE WHEN PARTICULAR OR EXCEPTIONAL CONDITIONS OR CIRCUMSTANCES
EXIST OR BECAUSE OF APPLICABLE LAWS OR GOVERNMENT REGULATIONS.
MSDS Elta MD UV Shield.doc Page 4 of 4
|