I. PRODUCT AND COMPANY INFORMATION Employee Handling Summary
- Wear protective gloves for
prolonged use or skin sensitivity.
Manufacturer's Product Name: Wright's Brass Polish
Common Name: liquid brass cleaner and polish - Avoid eye contact.
See Sections VI & VII for further
information
Manufacturer: J. A. Wright & Co.
P.O. Box 566
Keene, NH 03431
603-352-2625
Manufacturer's Hazard Rating: Rating Scale:
Health = 1 0 = Minimal
Fire = 0 1 = Slight
Reactivity = 0 2 = Moderate
3 = Serious
4 = Severe
N.D. = Not Determined
N.A. = Not Applicable
II. HAZARDOUS INGREDIENTS
Ingredient CAS No. Approx. % (Wt.)
Isopropanol 67-63-0 3%
Ammonium Hydroxide 1336-21-6 3%
Oxalic Acid 144-62-7 3%
Silicon Dioxide - (Respirable free silica dust is a health hazard, 14808-60-7 25%
however silica dust is not generated with use of this product.)
III. PHYSICAL DATA
Appearance: Off-white liquid Vapor Pressure: N.D.
Odor: Ammonia Vapor Density: N.D.
Evaporation Rate: Below 1 (NH3)
Boiling Point: 190 F
Melting Point: N.A. Solubility in Water: Appreciable
Specific Gravity: 1.18 Approx. % Volatile (Wt.): 70% including water
pH: 9.5 - 9.8
IV. FIRE AND EXPLOSION INFORMATION
Flash Point: N.A. --- Not Combustible (Pensky-Martens closed cup method)
Extinguishing Media: N.A.
Special Fire Fighting Procedures: None
Unusual Fire and Explosion Hazards: None Known
V. REACTIVITY INFORMATION
Stability: Stable
Incompatibility: Avoid mixing with strong mineral acids or chlorine bleach
Hazardous Decomposition: None known
Hazardous Polymerization: Will not occur
Product Name: Wright's Brass Polish
Manufacturer: J. A. Wright & Co.
VI. HEALTH HAZARD INFORMATION
Primary routes of entry: Skin, Eyes, Inhalation
Skin: Product is a skin irritant. Wear rubber gloves for prolonged use or if skin sensitive.
Eyes: Product is an eye irritant. In case of contact with eyes, flush eyes thoroughly with water and seek medical attention.
Inhalation: Inhalation of ammonia fumes directly from bottle opening may cause irritation of the nose.
Oral: Product is not toxic.
VII. HANDLING / USE PRECAUTIONS AND DISPOSAL PROCEDURES
Safe handling and use: Shake carefully to avoid splashing. Use in well ventilated area to prevent concentrating
ammonia fumes. Use rubber gloves for prolonged use or if skin-sensitive. Avoid eye contact.
Storage Conditions: Store in 50-100 F range.
Action to take for spills or leaks: Dilute with water and mop up thoroughly.
Waste Disposal: Sewer, septic tank, or sanitary landfill.
VIII. ECOLOGICAL INFORMATION
Proper disposal is by sewer, septic, or landfill.
IX. REGULATORY INFORMATION
TSCA: The ingredients of this product are on the Toxic Substances Control Act inventory.
DOT: This product is not subject to the regulations of the U.S. Department of Transportation.
CERCLA: This product is not subject to the regulations of the Comprehensive Environmental
Response, Compensation, and Liability Act.
SARA Title III: This product is not subject to the regulations of the Superfund Amendments and Reauthorization Act.
California Proposition 65: No ingredient of this product is reportable under this statute.
Massachusetts and Pennsylvania Right-to-Know Laws:
(Hazardous substances present in a product in concentration > 1% which may require reporting)
Hazardous Substance CAS No. Concentration
Isopropanol 67-63-0 3%