MATERIAL SAFETY DATA SHEET
Mule Hide Products Co., Inc.
P.O. Box 1057 Date Prepared: 1/01/2007
Beloit, WI 53512
800-786-1492
MSDS 10-9625
SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Mule-Hide A-300 Finish
Product Name
N/A
Chemical Name
Mule-Hide Products Co., Inc.
Manufacturer
P.O. Box 1057
Address
Beloit, WI 53512-1057
608-365-3111
Phone
www.mulehide.com
Internet
800-424-9300 Chemtrec
Emergency Phone
EAC-005
MSDS Number
October 15, 2001
Effective Date
Health 1, Flammability 0, Reactivity 0
nNFPA Rating
0-least, 1-slight, 2-moderate, 3-high, 4-extreme
SECTION 2 - PRODUCT INGREDIENTS
Exposure Limit Exposure Limit
Ingredient Name CAS Number % Weight
(OSHA PEL) (ACGIH TLV)
Calcium Carbonate 1317-65-3 30-40 15 mg/m3 10 mg/m3
Titanium Dioxide 13463-67-7 5-6 15 mg/m3 10 mg/m3
Zinc Oxide 1314-13-2 2-4 5 mg/m3 5 mg/m3
Ethylene Glycol 107-21-1 1-2 None Established 50 ppm
SECTION 3 - PHYSICAL/CHEMICAL DATA
Properties Unit Data
Appearance N/A White Liquid
Boiling point (Deg. F) 212
Evaporation Rate (N-Butyl Acetate = 1) <1
Flash Point (Deg. F) >212
Melting Point (Deg. c~) Same as Water
Odor N/A Acrylic Odor
Ph (undiluted product) N/A N/A
Saturation in air % N/A
Solids Content N/A N/A
Specific gravity kg/l 1.438
Vapor Density Air = 1 <1
Vapor Pressure (MM HG ?68 deg. F) 17.0
Viscosity cP N/A
VOC g/lite N/A
Volatility % 36
Water solubility % Indinitely Dilutable
1 of 4 MSDS 10-9625
MATERIAL SAFETY DATA SHEET
Mule Hide Products Co., Inc.
P.O. Box 1057 Date Prepared: 1/01/2007
Beloit, WI 53512
800-786-1492
MSDS 10-9625
SECTION 4 - FIRE AND EXPLOSION DATA
Flammability Properties
Flashpoint (deg. F): >212
Lower Flammable Limits N/A
Upper Flammable Limits N/A
Auto Ignition (deg. F) N/A
Fire Extinguishing Media
Product will not burn until all water content has evaporated. Use carbon dioxide, dry chemical, foam or water spray.
Special Fire Fighting Procedures
As a precaution, firefighters should wear self-contained breathing apparatus.
Unusual Fire and Explosion Hazards
Decomposition products may be toxic.
SECTION 5 - HAZARD IDENTIFICATION
Toxicity
Follow all federal, state, and local regulations.
Routes and Effects of Exposure
Eyes, skin, inhalation, and ingestion.
Eyes
Exposure may cause mild eye irritation.
Skin
Exposure may cause mild skin irritation.
Inhalation
Excessive inhalation of vapors or mists can cause nasal and respiratory irritation.
Ingestion
May cause gastrointestinal irritation, nausea, vomiting and diarrhea.
Effects of Chronic Overexposure
Acute exposure may be cause minor irritation to sensitive individuals. No know effects from chronic overexposure.
Medical Conditions Aggravated by Exposure
None Known
Signs and Symptoms of Exposure
May cause minor irritation to skin, eyes or throat.
SECTION 6 - FIRST AID PROCEDURES
Eye Contact
Immediately flush with large amounts of water for at least 15 minutes, lifting upper and lower eyelids occasionally. If irritation persists, consult a
physician.
Skin Contact
Thoroughly wash exposed skin areas with soap and water.
Inhalation
If affected, remove individual to fresh air.
Ingestion
If conscious, give 3 to 4 glasses of water to dilute. Consult a physician. Induce vomiting only under qualified medical direction. Do not give
anything by mouth to an unconscious person.
2 of 4 MSDS 10-9625
MATERIAL SAFETY DATA SHEET
Mule Hide Products Co., Inc.
P.O. Box 1057 Date Prepared: 1/01/2007
Beloit, WI 53512
800-786-1492
MSDS 10-9625
SECTION 7 - STABILITY/REACTIVITY DATA
Stability
Stable under normal conditions.
Conditions to Avoid
None Known
Incompatibility (Materials to avoid)
None Known
Hazardous Polymerization
Will not occur.
Hazardous Combustion and Decomposition Products
Carbon monoxide, carbon dioxide, and traces of nitrogen.
SECTION 8 - HANDLING, USE, AND DISPOSAL
Procedures for Spills/Leaks
Cover with an absorbent material and transfer to a closed container.
Storage
Keep from freezing. Close container after use.
Practice safe working procedures and good personal hygiene. Use protective equipment when necessary. Wash hands thoroughly after
handling, especially before eating, drinking, smoking or using toilet facilities.
Waste Disposal Method
Dispose of material in accordance with applicable local, county, state and federal regulations.
SECTION 9 - EXPOSURE CONTROL/PERSONAL PROTECTION
Eye
Safety glasses are a minimum.
Ventilation
General local ventilation should be sufficient.
Respiratory
None Required.
Protective Clothing
The use of impervious (rubber or better) gloves is advised to prevent skin contact, or injury (see your safety equipment supplier). Utilize a
chemical resistant apron and/or other impervious clothing to minimize repeated or prolonged skin contact.
Work/Hygienic Practices
Wash hands thoroughly after handling, especially before eating, drinking, smoking or using toilet facilities.
3 of 4 MSDS 10-9625
MATERIAL SAFETY DATA SHEET
Mule Hide Products Co., Inc.
P.O. Box 1057 Date Prepared: 1/01/2007
Beloit, WI 53512
800-786-1492
MSDS 10-9625
SECTION 10 - TRANSPORTATION
Not regulated as a hazardous material for transport.
Shipping Name
N/A
Labeling
None required.
Labeling Required
N/A
Hazard Class
SECTION 11 - MISCELLANEOUS INFORMATION
Other Precautions
Product may corrode, degrade, or otherwise react with some metals and plastics upon prolonged contact. Consult with equipment supplier for
proper construction materials for storage tanks, mixers, fittings, pipes and other storage and handling equipment.
Containers of this material may be hazardous when emptied, because emptied containers retain residues (vapors, liquids and/or solids), all
hazard precautions given in this data sheet must be observed.
Additional Information
Contact Mule-Hide at 608-365-3111
MSDS Revision Summary
Revision Date January 1, 2007
Reason for Change New format
Disclaimer
The responsibility to provide a safe workplace is with the user. The user should consider the health hazards and safety information contained
herein as a guide and should take those precautions required in an individual operation to instruct employees and to develop work practices and
procedures for a safe environment.
The information herein has been compiled from sources believed to be reliable, and is accurate to the best of our knowledge. However, Mule-
Hide Products Co., Inc. cannot give any guarantees regarding information from other sources, and expressly does not make any warranties, nor
assume any liability for its use.
The OSHA Permissible Exposure Limits (PEL'S) contained in this Material Safety Data Sheet are the current limits as listed in the June 1993 Air
Contaminants Final Rule, specified in Tables Z-1, Z-2, and Z-3 (Federal Register, 58:35338-35351, June 30, 1993; corrected in Federal
Register, 58:40191, July 27, 1993; and subsequent amendments).
This is the end of MSDS
4 of 4 MSDS 10-9625
|