MATERIAL SAFETY DATA SHEET
MSDS Name: TACC FA636 BONDING ADHESIVE
MSDS Number: FA636
MSDS Last Updated: NOV-02-2006 Printed On: 11/02/06
Page Number: 1
--------------------------------------------------------------------------------
=====================================================================
SECTION I - PRODUCT AND COMPANY INFORMATION
=====================================================================
Product Name: TACC FA636 BONDING ADHESIVE
CAS Number: MIXTURE
Hazard Rating: Health: 2 Fire: 2 Reactivity: 0 PPI: B
Company Identification: ITW TACC
AIR STATION INDUSTRIAL PARK
ROCKLAND MA 02370
Telephone/Fax: (781) 878-7015 (781) 871-6727
Chemtrec (24 Hour): (800) 424-9300
Trade Name: TACC FA636
Product Code: FA636
DOT Hazard Class COMBUSTI
UN Number: NA1993
Shipping Name: COMBUSTIBLE LIQUID, NOS
Packing Group: III
Contains: (TOLUENE, METHANOL)
TACC is a registered trademark of Illinois Tool Works, Inc.
=====================================================================
SECTION II - HAZARDOUS INFORMATION
=====================================================================
Ingredient Name CAS Number Percent TSCA
TOLUENE 108-88-3 3-10 Y
TITANIUM DIOXIDE 13463-67-7 1-5 Y
METHANOL 67-56-1 1-5 Y
=====================================================================
SECTION III - PHYSICAL DATA
=====================================================================
Appearance/Color: WHITE
Boiling Range: 147. F
Evaporation Rate: Faster than n-Butyl Acetate
--------------------------------------------------------------------------------
MATERIAL SAFETY DATA SHEET
MSDS Name: TACC FA636 BONDING ADHESIVE
MSDS Number: FA636
MSDS Last Updated: NOV-02-2006 Printed On: 11/02/06
Page Number: 2
--------------------------------------------------------------------------------
% Volatile Weight: 46.1%
% Volatile Volume: Not Available
Specific Gravity: 1.07773
Weight/Volume Measure: 8.98
EPA Method 24 VOC: 178.7 g/L
Photo Chem Reactive Only VOC: 109.6
=====================================================================
SECTION IV - FIRE AND EXPLOSION HAZARD DANGER
=====================================================================
Flammability Class: II
Flash Range: 140. F
Explosive Range: 1.1%
12.8%
EXTINGUISHING MEDIA:
Foam, dry chemical, carbon dioxide, water spray or fog.
SPECIAL FIREFIGHTING PROCEDURES:
Avoid breathing smoke. Use air supplied rescue equipment for
enclosed area. Water tends to spread burning liquid if large
amounts used.
UNUSUAL FIRE & EXPLOSION HAZARDS:
Flammable. Vapors may ignite explosively and/or cause flash
fires. Eliminate sources of ignition. No smoking. Use
adequate cross ventilation sufficient to remove odor of solvent
and vapors. Electrically ground all containers during transfer.
=====================================================================
SECTION V - HEALTH HAZARD DATA
=====================================================================
PERMISSIBLE EXPOSURE LEVEL:
SEE SECTION VIII.
EFFECTS OF OVEREXPOSURE:
INHALATION: May cause dizziness, nausea, upper respiratory
irritation, drowsiness, mental depression or narcosis,
difficulty in breathing, irregular heartbeats. Chronic effects
of overexposure to solvent vapors could lead to permanent
effects to the nervous system, body organs and slight liver
damage on excessive exposure. Use with adequate ventilation.
Can cause cardiac arrest and irregular heartbeats when inhaled
in massive amounts as for euphoria.
EYES: Irritation.
SKIN: Removal of skin oils, irritation, dermatitis,
--------------------------------------------------------------------------------
MATERIAL SAFETY DATA SHEET
MSDS Name: TACC FA636 BONDING ADHESIVE
MSDS Number: FA636
MSDS Last Updated: NOV-02-2006 Printed On: 11/02/06
Page Number: 3
--------------------------------------------------------------------------------
sensitization.
INGESTION: May be harmful if swallowed; can cause gastro-
intestinal tract effects.
FIRST AID:
INHALATION: Get fresh air, if necessary call physician.
SKIN: Wash with mild soap and water, apply a mild cream.
EYES: Flush with water for at least 15 minutes.
INGESTION: Call Poison Center immediately.
=====================================================================
SECTION VI - REACTIVITY DATA
=====================================================================
Stability: This product is stable
Hazardous Polymerization: Hazardous polymerization will not occur
INCOMPATIBILITY:
Strong oxidizing agents, strong acids and bases.
CONDITIONS TO AVOID:
Fire, sparks, static electricity.
HAZARDOUS DECOMPOSITION PRODUCTS:
Carbon monoxide, carbon dioxide.
=====================================================================
SECTION VII - SPILL OR LEAK PROCEDURES
=====================================================================
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:
Keep spectators away. Eliminate all ignition sources (flames,
hot surfaces and sources of electrical, static or frictional
sparks). Dike and contain spill with inert material (e.g. sand,
earth). Transfer liquids to covered metal containers for
recovery or disposal, or remove with inert absorbent. Use only
non-sparking tools. Place absorbent diking materials in
covered metal containers for disposal. Prevent contamination of
sewers, streams and groundwater with spilled material or used
absorbent.
WASTE DISPOSAL METHOD:
Dispose in accordance with federal, state and local regulations.
=====================================================================
SECTION VIII - EXPOSURE CONTROLS/PERSONAL PROTECTION
=====================================================================
Occupational Exposure Limits:
ACGIH TLV ACGIH TLV-C ACGIH STEL OSHA STEL OSHA PEL
TOLUENE
--------------------------------------------------------------------------------
MATERIAL SAFETY DATA SHEET
MSDS Name: TACC FA636 BONDING ADHESIVE
MSDS Number: FA636
MSDS Last Updated: NOV-02-2006 Printed On: 11/02/06
Page Number: 4
--------------------------------------------------------------------------------
50.00 PPM N/est N/est N/est 200.00 PPM
TITANIUM DIOXIDE
N/est N/est N/est N/est N/est
METHANOL
200.00 PPM N/est 250.00 PPM 250.00 PPM 200.00 PPM
RESPIRATORY PROTECTION:
If workplace exposure limit of product is exceeded, a NIOSH/MSHA
approved air supplied respirator must be used in absence of proper
environmental control. Engineering or administrative controls
should be implemented to reduce exposure.
VENTILATION:
Provide sufficent mechanical (general and/or local exhaust)
ventilation to maintain exposure below PEL.
PROTECTIVE GLOVES:
Chemical resistant gloves.
EYE PROTECTION:
Chemical splash goggles in compliance with OSHA regulations are
advised.
OTHER PROTECTIVE EQUIPMENT:
To prevent repeated, prolonged skin contact, wear impervious
clothing and boots.
=====================================================================
SECTION IX - SPECIAL PRECAUTIONS
=====================================================================
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE:
Keep container closed when not in use. Store at 60-95 degrees F
and out of the sun. Use adequate ventilation to avoid breath-
ing vapors when cover is removed. Ground all equipment when
handling flammable solventborne materials.
OTHER PRECAUTIONS:
For professional or industrial use only. Follow label instructions.
Keep out of the reach of children. Not for consumption. No smoking.
Do not breathe fumes. Avoid contact with body. Turn off all pilot
lights, flames, stoves, heaters, electric motors, welding equipment
and other sources of ignition. Close all containers when not in use.
Empty containers must not be washed and re-used for any purpose.
Contact lens wearers take appropriate precautions. Wash hands
throughly after handling.
For spray applications, use only with approved spray equipment.
--------------------------------------------------------------------------------
MATERIAL SAFETY DATA SHEET
MSDS Name: TACC FA636 BONDING ADHESIVE
MSDS Number: FA636
MSDS Last Updated: NOV-02-2006 Printed On: 11/02/06
Page Number: 5
--------------------------------------------------------------------------------
For flammable products, vapors may cause flash fire or ignite
explosively. To prevent buildup of vapors, use adequate ventilation
(e.g. open all windows and doors to achieve cross-ventilation).
Containers may be hazardous when empty. Never use welding or cutting
torch on or near container.
=====================================================================
SECTION X - ADDITIONAL REGULATORY INFORMATION
=====================================================================
-SARA TITLE III SECTION 313:
This product contains the following toxic chemicals subject to the
reporting requirements of Section 313 of the Emergency Planning and
Community Right to Know Act of 1986 and of 40 CFR 372:
Ingredient Name CAS Number Percent
TOLUENE 108-88-3 3-10
METHANOL 67-56-1 1-5
-PROP 65 (TERATOGEN)
WARNING: This product contains a chemical known to the state of
California to cause birth defects or other reproductive harm.
Ingredient Name CAS Number Percent
TOLUENE 108-88-3 3-10
=====================================================================
DISCLAIMER
=====================================================================
****** NOTICE ******
This information is furnished without warranty, expressed or
implied, except that it is accurate to the best knowledge of ITW
TACC. The data on this sheet relates only to the specific material
designated herein. ITW TACC assumes no legal responsibility for use
or reliance upon these data.
--------------------------------------------------------------------------------
|