Material Safety Data Sheet CS: 1.4.21
1 of 5
Page:
5FV49 Issue Date :August 2006
Infosafe NoTM ISSUED by FUCHS CS: 1.4.21
Product Name :ACDELCO Supreme 10W30
Not classified as hazardous
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER
ACDELCO Supreme 10W30
Product Name
4024
Product Code
Fuchs Lubricants (Australasia) Pty Ltd (ABN 88 005 681 916)
Company Name
Address 49 McINTYRE ROAD SUNSHINE
VIC 3020 Australia
1800 638 556 24Hr
Emergency Tel.
Tel: 03 9300 6400
Telephone/Fax
Fax: 03 9300 6401
Number
customer.service@fuchs.com.au
Email
Recommended Use Supplied as a high performance economy oil for gasoline and diesel engines for
use in suitable applications only.
Refer to Product Information Sheet for further information.
Additional
Information
Other Information Visit our website: www.fuchs.com.au
Orders Freecall (in Australia): 1800 1800 13
Orders Freecall (in New Zealand): 0800 382 476
2. HAZARDS IDENTIFICATION
Not classified as hazardous
Hazard
NON-HAZARDOUS SUBSTANCE.
Classification
NON-DANGEROUS GOODS.
Hazard classification according to the criteria of NOHSC.
Dangerous goods classification according to the Australia Dangerous Goods
Code.
Not classified as hazardous
Risk Phrase(s)
Not classified as an irritant.
Irritancy of Product
Not known to be a sensitiser.
Sensitization of
Product
No teratogenic effects known.
Teratogenicity
Other Information Used oils may contain harmful impurities that have accumulated during use. The
concentration of such impurities will depend on use and they may present risks
to health and environment on diposal. All used oils should be handled with
caution and skin contact avoided as far as possible.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Liquid
Chemical
Characterization
Name CAS Proportion Hazard Symbol Risk Phrase
Ingredients
Mineral Oil Not required 70-100 %
0-4.99 % R38, R41
Zinc Confidential Xi
alkyldithiophosph .
ate
Alkyl phenol 0-0.99 % R38, R62
Confidential Xn, Xi
.
Diphenylamine 122-39-4 0-0.99 % R23/24/25,
T
R33
Mixture To 100%
Ingredients
determined not to
be hazardous
Other Information The petroleum oils in this product contain less than 3% DMSO extract as
measured by the IP 346 test method.
4. FIRST AID MEASURES
Inhalation Remove victim from exposure - avoid becoming a casualty. Allow patient to
assume most comfortable position and keep warm. Keep at rest until fully
recovered. Seek medical advice if effects persist. If breathing laboured and
Print Date: 24/02/2009 CS: 1.4.21
Material Safety Data Sheet CS: 1.4.21
2 of 5
Page:
5FV49 Issue Date :August 2006
Infosafe NoTM ISSUED by FUCHS CS: 1.4.21
Product Name :ACDELCO Supreme 10W30
Not classified as hazardous
patient cyanotic (blue), ensure airways are clear and have qualified person
give oxygen through a face mask. If breathing has stopped apply artificial
respiration at once. In the event of cardiac arrest, apply external cardiac
massage.
Ingestion Give water to drink. DO NOT induce vomiting. Seek medical attention. If
vomiting occurs get immediate medical attention due to aspiration risk.
Skin Wash with plenty of soap and water. If irritation occurs seek medical advice.
Remove contaminated clothing and wash before re-use.
Eye Immediately irrigate with copious quantity of water for at least 15 minutes.
Eyelids to be held open. In all cases of eye contamination it is a sensible
precaution to seek medical advice.
First Aid Facilities Normal washroom facilities are generally suitable. Ensure an eyewash station
and safety shower are available and ready for use.
Treat symptomatically.
Advice to Doctor
Keep water and mild soap near work site.
Other Information
5. FIRE FIGHTING MEASURES
Extinguish fire with the following: Use CO2, dry chemical or foam.
Suitable
Extinguishing Media
Combustion products may include: a complex mixture of airborne solid and
Hazards from
liquid particulates and gases, including carbon monoxide, carbon dioxide,
Combustion
soot, oxides of sulfur, and unidentified organic and inorganic compounds.
Products
Specific Methods Fire fighters to wear self-contained breathing apparatus if risk of exposure
to products of decomposition.
Low hazard
Specific Hazards
If safe to do so, remove containers from path of fire. Keep containers cool
Precautions in
with water spray. Avoid spreading liquid and fire by water flooding.
connection with Fire
6. ACCIDENTAL RELEASE MEASURES
Spills & Disposal Slippery when spilt. Avoid accidents, clean up immediately. CLEAN-UP METHODS -
SMALL SPILLAGE (20L or less): Absorb or contain liquid with sand, earth or
spill control material. Shovel up using non sparking tools and place in a
labelled, sealable container for subsequent safe disposal. Put leaking
containers in a labelled drum or overdrum. Scrub contaminated surfaces with
detergent solution. Retain washings as contaminated waste.
CLEAN-UP METHODS - LARGE SPILLAGE (more than 20L): Transfer to a labelled,
sealable container for product recovery or safe disposal. Treat residues as
for small spillage.
Dispose according to local regulations. PERSONAL PRECAUTIONS: Extinguish naked
flames. Remove ignition sources. No smoking. Avoid sparks. Evacuate the area
of all non-essential personnel. Take precautionary measures against static
discharge. Shut off leaks, if possible without personal risk. Avoid contact
with skin, eyes, clothing. Do not breathe vapour. Ventilate contaminated area
thoroughly.
Dispose according to local regulations.
Other Information PROCEDURES IN CASE OF BREAKAGE OR LEAKAGE: Stop the source of the leak or
release and contain spill if possible. Ventilate area. Use respirator and
protective clothing as discussed in this MSDS. Cover spill with a generous
amount of inert absorbent. Use a stiff broom to mix thoroughly. Sweep up and
place in a labelled disposable container. Scrub contaminated area with
detergent and water using a stiff broom. Pick up liquid with additional
absorbent and place in a labelled disposable container. Prevent contamination
of groundwater or surface water.
7. HANDLING AND STORAGE
When handling product in drums, safety footwear should be worn and proper
Precautions for Safe
handling equipment should be used. Prevent spillages. Ensure the appropriate
Handling
personal protective equipment is used when handling this material.
Keep containers closed at all times. Store in cool place and out of direct
Conditions for Safe
sunlight. Store away from oxidizing agents.
Storage
Check containers regularly for leaks.
Not corrosive
Corrosiveness
Print Date: 24/02/2009 CS: 1.4.21
Material Safety Data Sheet CS: 1.4.21
3 of 5
Page:
5FV49 Issue Date :August 2006
Infosafe NoTM ISSUED by FUCHS CS: 1.4.21
Product Name :ACDELCO Supreme 10W30
Not classified as hazardous
Storage Regulations Store in a well-ventilated place away from ignition sources, oxidising agents,
foodstuffs and clothing.
Keep containers closed when not in use.
Refer to AS 1940 The Storage and Handling of Flammable and Combustible
Liquids, and NOHSC:1015 National Standard for Storage and Handling of
Workplace Dangerous Goods for further information.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
No exposure standard has been established for this product. NOHSC Exposure
National Exposure
Standard: Oil mists - time weighted average (TWA) 5 mg/m3 and a short term
Standards
exposure limit (STEL) 10mg/m3 is recommended.
Exposure Standard means the average concentration of a particular substance in
Other Exposure
the worker's breathing zone, exposure to which, according to current
Information
knowledge, should not cause adverse health effects nor cause undue discomfort
to nearly all workers. It can be of three forms; time-weighted average (TWA),
peak limitation, or short term exposure limit (STEL).
Maintain concentration below recommended exposure limit. Special ventilation
Engineering
is not normally required due to the low volatility of the product at normal
Controls
temperatures. However, in the operation of certain equipment or at elevated
temperatures, mists or vapour may be generated and exhaust ventilation should
be provided to maintain airborne concentration levels below the exposure
standard or where no exposure standard is allocated, as low as is reasonably
practicable.
Respirator not normally required.
Respiratory
Airborne concentrations should be kept to lowest levels possible. If vapour,
Protection
mist or dust is generated and the occupational exposure limit of the product
is exceeded, use appropriate AS/NZS 1715/1716 approved half-face filter
respirator suitable for organic vapours or air supplied respirator after
determining the airborne concentration of the contaminant. Air supplied
respirators should always be worn when airborne concentration of the
contaminant or oxygen content of the air is unknown.
Safety glasses,goggles or faceshield as appropriate.
Eye Protection
PVC gloves.
Hand Protection
Enclosed footwear.
Footwear
Overalls or similar protective apparel.
Body Protection
Hygiene Measures Always wash hands before smoking, eating, drinking or using the toilet. If
contamination occurs, change clothing. Discard internally contaminated gloves
and footwear. Launder contaminated clothing before reuse.
Will not burn unless preheated. Isolate from sources of heat, naked flame, or
Special Protective
sparks.
Measures
9. PHYSICAL AND CHEMICAL PROPERTIES
Liquid
Form
Dark amber liquid
Appearance
Mild
Odour
Less than 0癈
Melting Point
Greater than 300癈
Boiling Point
Not soluble
Solubility in Water
Soluble in petroleum solvents
Solubility in Organic
Solvents
Not relevant
pH Value
Less than 0.1 kPa
Vapour Pressure
Greater than 2.0 (Air = 1)
Vapour Density
(Air=1)
Less than 1 (n-butyl acetate = 1)
Evaporation Rate
Approximately 220 mm2/s @ 40癈 (kinematic)
Viscosity
Print Date: 24/02/2009 CS: 1.4.21
Material Safety Data Sheet CS: 1.4.21
4 of 5
Page:
5FV49 Issue Date :August 2006
Infosafe NoTM ISSUED by FUCHS CS: 1.4.21
Product Name :ACDELCO Supreme 10W30
Not classified as hazardous
Clear amber/brown
Colour
0.89 kg/L @ 15癈 typical
Density
Greater than 180.0 癈 (PMCC)
Flash Point
Combustible liquid C2 according to AS 1940.
Flammability
Greater than 250癈
Auto-Ignition
Temperature
Approximately 1.5%
Flammable Limits -
Lower
Approximately 6.0%
Flammable Limits -
Upper
Not considered an explosion risk under normal conditions of use
Explosion Properties
These physical data and other properties do not constitute a specification
Other Information
10. STABILITY AND REACTIVITY
Stable under normal conditions of use
Chemical Stability
Strong oxidising agents
Incompatible
Materials
Will react with strong oxidising agents.
Hazardous Reactions
Will not occur
Hazardous
Polymerization
11. TOXICOLOGICAL INFORMATION
This product contains petroleum base oils which may be refined by various
Toxicology
processes including severe solvent extraction, hydrocracking and
Information
hydrotreating. These oils have not been listed in the U.S. National
Toxicology Program (NTP) Annual Report nor have they been classified by the
International Agency for Research on Cancer (IARC) as carcinogenic or probably
carcinogenic to humans. Oral LD50 ({UD01}): {UD02} mg/kg
Inhalation of mists or aerosols can produce respiratory irritation.
Inhalation
Ingestion May cause mild irritation of the mouth, throat, and stomach with nausea and
mild diarrhoea. Large amounts can cause vomiting which can lead to aspiration
of vomited material into the lungs.
Skin Will have a defatting effect on the skin. Contact with skin may result in
irritation.
May cause watering of eyes.
Eye
Chronic Effects Prolonged or repeated exposure may result in irritation, with the possibility
of dermatitis
This Product contains small amounts of para-dodecylphenol. Rats given high,
Reproductive
repeated daily doses by oral intubation experienced adverse reproductive
Toxicity
effects. The relevance of these effects to humans is uncertain.
Mutagenicity This product contains low amounts of diphenylamine, which in high amounts is
believed to cause teratogenicity. The adverse effects were only observed when
administering high doses orally, therefore it would not seem to present a
workplace hazard.
Product is not a known carcinogen.
Carcinogenicity
12. ECOLOGICAL INFORMATION
Leaching and penetration through surface soils is generally regarded as
Short Summary of
resulting in long-term persistence. Fresh or used product may be harmful to
Assessment of
aquatic life.
Environmental
Impact
Do not allow material to enter drains or waterways.
Environ. Protection
13. DISPOSAL CONSIDERATIONS
14. TRANSPORT INFORMATION
Print Date: 24/02/2009 CS: 1.4.21
Material Safety Data Sheet CS: 1.4.21
5 of 5
Page:
5FV49 Issue Date :August 2006
Infosafe NoTM ISSUED by FUCHS CS: 1.4.21
Product Name :ACDELCO Supreme 10W30
Not classified as hazardous
Not regulated for transport.
Transport
Information
15. REGULATORY INFORMATION
Not Scheduled
Poisons Schedule
No special packaging or labelling requirements.
Packaging &
Labelling
16. OTHER INFORMATION
Contact Person/Point Product Manager Mining (02) 4969 0444
This information was prepared in good faith from the best information
available at the time of issue. It is based on the present level of research
and to this extent we believe it is accurate. However, no guarantee of
accuracy is made or implied and since conditions of use are beyond our
control, all information relevant to usage is offered without warranty. The
manufacturer will not be held responsible for any unauthorised use of this
information or for any modified or altered versions.
If you are an employer it is your duty to tell your employees, and any others
that may be affected, of any hazards described in this sheet and of any
precautions that should be taken.
Material Safety Data Sheets are updated frequently. Please ensure you have a
current copy.
* NOHSC:2011 National Code of Practice for the Preparation of Material Safety
Literature
Data Sheets
References
* NOHSC:1008 Approved Criteria for Classifying Hazardous Substances
* NOHSC:10005 List of Designated Hazardous Substances
* NOHSC:1005 Control of Workplace Hazardous Substances, National Model
Regulations
* NOHSC:2007 Control of Workplace Hazardous Substances, National Code of
Practice
* NOHSC:1003 Exposure Standards for Atmospheric Contaminants in the
Occupational Environment, National Exposure Standards
* NOHSC:3008 Exposure Standards for Atmospheric Contaminants in the
Occupational Environment, Guidance Note
* NOHSC:1015 Storage and Handling of Workplace Dangerous Goods, National
Standard
* NOHSC:2017 Storage and Handling of Workplace Dangerous Goods, National Code
of Practice
* SUSDP, Standard for the Uniform Scheduling of Drugs and Poisons
* ADG, Australian Dangerous Goods Code
* MSDS of component materials
Last Change Supersedes issue date:
Reason/s for revision: Alignment to NOHSC requirements.
...End Of MSDS...
?Copyright ACOHS Pty Ltd
Copyright in the source code of the HTML, PDF, XML, XFO and any other electronic files rendered by an Infosafe system for Infosafe MSDS displayed on this site is the
intellectual property of Acohs Pty Ltd.
Copyright in the layout, presentation and appearance of each Infosafe MSDS displayed on this site is the intellectual property of Acohs Pty Ltd.
The compilation of MSDS's displayed on this site is the intellectual property of Acohs Pty Ltd.
Copying of any MSDS displayed on this site is permitted for personal use only and otherwise is not permitted. In particular the MSDS's displayed on this site cannot be
Print Date: 24/02/2009 CS: 1.4.21
|